Construction Equipment Construction Attachments For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Wipers: The wiper assembly is present with the cab shell. Cab Information: Cab Manufacturer: Volvo Type of Cab: EROPS Cab If EROPS Cab, is Certification Tag present?: Yes Is Cab Equipped with/for AC?: Yes Condition of: Cab Shell: The cab shell is in very...

No cracks or repairs have been found.. Description: All of the pin holes on this boom appear to be in decent shape. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Weight: 6,200 lbs.

All of the pin holes on this boom are in good condition and no cracks have been found. No warping appears to be present. The machine this boom was on had burned and the base of the boom has taken a little heat from the fire.

Description: All of the pin holes on this stick are in good condtition. The rest of the boom looks good. On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos).

There are no cracks or repairs present on this stick. Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. All of the other pin holes look good.

Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters. This stick has a thumb mount welded to the bottom of it. All of the pin holes appear to be in good shape and no cracks or repairs have been found.

No cracks have been found. Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long

Stick Information

LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. CONTROL LINKAGE HAS SOME WEAR. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. HAS A/C WHICH IS NOT WORKING.

Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters. This stick has a thumb mount welded to it. All of the pin holes appear to be in good shape and no cracks or repairs have been found.

Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around the holes having some "scoring" in them. No cracks have been found. All of the other pin holes appear to be in decent shape, althought some of the bushings...

A debris guard was fabricated and is welded to the top of the blade. Dimensions for Shipping (Height x Width x Length): Blade Dimensions: 2 ft. The angling frame overall appears to be in decent condition.

Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Description: All of the pin holes on this boom are in good shape and no cracks have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

No cracks or repairs have been found. Description: All of the pin holes on this boom appear to be in good shape. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long

This stick has a mount welded to the bottom of it. (Outer bushing part number: 61EN-13320). Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. Weight: 2,200 lbs. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters.

Jib-section-13 1/2 foot long jib section. Hydraulic cylinders: Boom cylinders-The working condition of these cylinders is unknown. All pin holes appear to be in good shape.and no cracks can be seen.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

This stick has whats left of a thumb mount, welded to it. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long There two cracks on this stick (see photos) near where the stick cylinder pins to it.

Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long 6.6 METER Weight: 9,000 lbs.

Description: The working length of this stick is 11 feet, 4 inches. This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it.

Description: All of the pin holes appear to be in good shape and no cracks have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Weight: 4,500 lbs.