Rigorous testing has proven these machines in difficult terrain The SGF 800 has a cutting depth of 800mm and a cutting width of 250mm. The SGF 1300 has a cutting depth of 1.300mm and a max width of 350mm.
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
It is designed mostly for small front loaders but also for mini excavators.The horizontal sweeping function is performed by 2 hydraulic rams which act at the same speed on each side of the cutter head.This allows a horizontal sweeping arc of 1000 mm without...
Available for excavators from 3-40 tonne. It has the capacity to handle light demolition tasks when dealing with structures made of wood or brick. The DG is made of high quality wear resistant materials with easy changed wear parts to reduce downtime.
It is designed mostly for small front loaders but also for mini excavators.The horizontal sweeping function is performed by 2 hydraulic rams which act at the same speed on each side of the cutter head.This allows a horizontal sweeping arc of 1000 mm without...
The FSI ST 27 T stump cutter is a 3 points linkage machine designed for micro or compact tractors and PTO driven.The horizontal sweeping is performed by 2 hydraulic rams which move at equal speed in each of the right or left directions.
Pinned and flanged swivel head rotators matching pendulum joints quick coupler complete solution from a single source As a matter of course, we haven't let the grease nipple protection and powder coating go missing either! various sizes...
The Stehr SBV range of Plate Compactors is a versatile tool able to cope with difficult ground conditions yet provide consistent results. They can be mounted on various carriers i.e. Ag Tractor, Excavator, Vibratory Roller, Motor Grader etc.
In case where ultimately you would need a machine with a horizontal sweeping action,it would be possible to modify the standard machine and add up to it the sweeping function accessory,in which case it would become a fsi ST 27 HS stump cutter .
HKL frames are developed for mounting onto loaders and excavators. The frames for loaders with a telescopic arm work to the left for better view over the work area. They are made in four models.
The FSI ST 65 T stump cutter can be equipped with an electrically controled valve block with a 4 m wire and a magnetic supporting bracket to place in the tractors cabin. The FSI ST 65 T stump cutter has an extremely good working range since the cutter...
HKL frames are developed for mounting onto loaders and excavators. The frames for loaders with a telescopic arm work to the left for better view over the work area. They are made in four models.
For an easy mounting and to avoid any loss of power through the transmission , the cutter wheel of the fsi ST 20 H stump cutter is fitted directly on the hydraulic piston motor shaft,this allows to use the maximum available flow delivered by the base...
Properties of the splitter cone high performance splitting material thickness and length have no effect on the cone wood splitter low risk of an accident (no direct contact with wood) weather independent, low maintenance expandable to include...
The gear driven power transmission is unique, efficient and reliable. The MM range can be fitted to either an excavator or wheel loader and is a versatile piece of equipment with good productivity.
HKL frames are developed for mounting onto loaders and excavators. The frames for loaders with a telescopic arm work to the left for better view over the work area. They are made in four models.
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
The large Hardox cutting wheel (570 mm diameter) with 20 triplex cutting teeth ensures a milling performance that meet professional standards. The pivoting movement is carried out via 2 strong hydraulic cylinders and is controlled via the loader joystick...
FSI Stump Cutter ST 20 HS is driven by a high performance piston motor with V-belt operation between the engine and cutting. Pivot means (2 oversized hydraulic rams) pivoted on the stump.
HKL frames are developed for mounting onto loaders and excavators. The frames for loaders with a telescopic arm work to the left for better view over the work area. They are made in four models.
Easy adaptation for your machine - the stump cutter is delivered together with brackets to fit on a standard supporting plate. V-belt drive between the hydraulic piston motor and the cutter wheel.
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
Lasco Hydraulic Log Splitter Approx. There are approximately 30 various models with 1-12 drive motors according to the hydraulic power on the carrier machine. 30 models with 1-12 drive motors Suit 1-45 ton based on model Prices from $8500 + GST The cone...
