Construction Equipment Asphalt Pavers Concrete Equipment For Sale In Raleigh

10' Screed with Hydraulic Extentions, 173hp Deere Dsl., 31,000 LBS, Track Paver.

WE ALSO HAVE A PARTS MACHINE AVAILABLE FOR SALE. CALL ROBB EINHAUS AT 210 355 5173 GREAT UNIT, OFFERING REMIX CAPABILITIES AND ONE TON STORAGE IN HOPPER, DEERE ENGINE, CAT 10-20B EXTEND-A-MAT SCREED THAT HAS DIESEL BURNERS, CHAINS AND AUGER ARE IN GREAT...

STOCK #A410, 1998 Aeroil HET-80 Tar Wagon, 10.1' in Length, 72.1" in Width, 6' in Height, 1590Lb. Axle, Spring Suspension, Disc Wheels, 15" Tires, Steel Frame-Open Channel, Pin Setting 2 3/4" Adjustable Pintle Hitch, Electric Brakes, Steel Box, Single...

5,000 HRS, Full Dual Lane Trimmer, Works Excellent, New Augers, Completed Large Job 9/2013, Ready To Go Back To Work!

10 gallon capacity, full wrap around oil jacket, manual full sweep agitation, single 80,000 BTU vapor burner with flame out protection, oil temperature gauge, material temperature gauge, front caster wheel, two rubber tread rear wheels, heated 1" discharge...

10 gallon capacity, hand agitation, leak free trigger controlled dispensing valve, 80,000 BTU propane torch w/hose & regulator, steel rear wheels, steel front caster wheel, temperature thermometer, hinged lid.

STOCK #A407, 1999 Aeroil HET-80 Tar Wagon, 10.1' in Length, 72.1" in Width, 6' in Height, 1590Lb. Axle, Spring Suspension, Disc Wheels, 15" Tires, Steel Frame-Open Channel, Pin Setting 2 3/4" Adjustable Pintle Hitch, Electric Brakes, Steel Box, Single...

Stock # A5319 Dimensions (L x H): 25' x 8' 6" **REDUCED PRICE** 1992 Rated HP 192 at 2800 RPM Etnyre K Chipspreader SN: K-5211 Engine SN: 44685171

Maxon remixer on 42"rail Deutz diesel

Fae SOIL Stabilizer used in ag application

PNEUMATIC ASPHALT PAVER, JOHN DEERE 4.5L, 8 TO 16FT SCREEN, DUAL CONTROLS

Deutz Diesel, 8-14' Screed,

These machines are Not a stock item. We would have to order from factory. Under-fired power emulsion sprayer 200 gallon or 300 gallon under-fired power emulsion sprayer, 5.5 hp Honda gas engine, 10 GPM pumping system with flushing tank, 17" manhole cover...

Very good condition. Ready to start screening. Let me help you sell your equipment. Farm rates as low as 3.72% and Construction 6.5 %. Screens and belts are in very good condition.

1992 Rosco Maximizer 1850 Gallon Asphalt Distributor On a Ford 800 Truck Works and Runs EXW: TX $ 20,000 USD Please Contact: Donnie at 817-504-1767 or donnie@

STOCK #A489, 1988 Gilson 59038-47619 Cement Mixer, Nationwide Delivery Available

600 gal EMUILSION & WATER, SEVERAL OTHER TRUCKS AVAILABLE, CALL FOR INFO. WE EXPORT.HABLAMOS ESPANOL. 1982 FORD L9000 / AKZO-NOBEL SLURRY SEAL SYSTEM, 8 yrd CAP.

2014 EDCO TMC7 Electric Floor Grinder 7" turbo edge grinder with multi access disc and a 2hp 115V motor.

600 gal EMUILSION & WATER. WE EXPORT, HABLAMOS ESPANOL. 94 FORD L9000 / AKZO-NOBLE SB804 SLURRY SEAL SYSTEM 94 FORD L9000 / AKZO- NOBLE SB804 SLURRY SEAL SYSTEM. SEVERAL TRUCKS AVAILABLE.

1997 10.00 x 20 Tires Deutz 912 Engine Normet Spraymec 6050W.

The plants were in service from 2009-2012 and are now fully disassembled. The plants were used in a project for the U.S. Army Corps of Engineers for the construction of a dam in Puerto Rico

2013 Husqvarna FS309 14" Walk Behind Concrete Saw Manually propelled concrete saw with 14" blade guard, 8hp Robin EX27X engine, and recoil start.

BlastPro BPZ-16-360 Ride On Shot Blast Machine, Wisconsin 465v, Dual Fuel: Gas or Propane, 16" Blast Pattern, Production Capacity: 3500 sq. The BPZ-16-360° provides high production rates and versatility.

Terex/CMI Concrete Paver Model SF 6004 (2005) Cat C-15 Diesel 37.5 Ft. Paving Width, Series 1 Paving Kit 26 Hydraulic Minnich Vibrators, 4 Hyd Elevation Sensors, 1 Electric Steering Sensor, 8’ 6” Tracks, 18” Poly Pads 732 hours, needs some work (call...

400HP MACK 8Lo Lo TRANS. HABLAMOS ESPANOL Click on our COMPANY name to check our huge variety of inventory 1040 HOURS ON EQUIPMENT, 36K MILES ON TRUCK. 05 MACK -BERGKAMP HD10 MICRO-SLURRYSEAL 05- MACK -BERGKAMP HD10 MICRO-SLURRY SEAL.

Co. 757-565-7222. 1991 INGERSOLL RAND MW250C MILLING MACHINE, 34" Milling Head,Location VA 1991 INGERSOLL RAND MW250C MILLING MACHINE, SN 5163 S, HOURS SHOWING 697, Detroit Engine,Lights, 34" Milling Head,Location VA PRICE $18,500.00 Stock # A797 Call...

CONTROL, BASE SYSTEM CAT G&S WASHDOWN, HIGH PRESSURE ROTOR, 88" COVER, DISCHARGE CONVEYOR PRODUCT LINK, SATELLITE PL321 SENSOR, GRADE, SONIC (CAT) CONTROL, BASE DISPLAY CAT G&S SENSOR, GRADE, WIRE ROPE (CAT) ROTOR, 88" HOUSING