Construction Attachments Attachments For Sale In Wittenberg

18" wide, 13 1/2" inside mounts, lightly used, v bottom, black in color, quick tach mounts

17" stick width, 3 15/16" pin dia, 21" pin spacing, replaceable tooth

39" wide, 3 1/8" pin diameter, 12 3/4" stick width

12' wide, 7' 6" deep, 5' 7" tall, 49" center to center lift arms, 3.5 top pin diameter, 4.25 lower pin diameter, 3.5 boss width, 8 teeth (like new) spade nose, came off a Clark Michigan 275C loader

Quick hitch 030 excavator bucket, 24" wide, 1/3 yard cap, 5 teeth, grey in color

3 Point Backhoe Attachment, 1,060#, 86" dig depth, 40 hp - 100 hp rated, 12.5" bucket, outriggers, operators seat, joystick controls, 2 line hyds

48" forks, 35" backrest height, 45" wide, adj fork width, quick tach mounts

65MM pins, 255" inside mounts, approx 2 1/2" - 2 9/16" pins, 10" inside mounts, 15" pin to pin, 31" wide, 5 teeth

88" wide, 84" sweep width, hyd angling, spring loaded, excellent broom cond, mech kick stand, skidsteer quick tach, 2 line hyds

11' rock/root rake, 5 teeth, w/outside mount arms

24" wide, 9 1/8" inside mounts, 2 3/8" pin dia, 15" pin to pin, 4 teeth, used/good condition, rear lifting eye

12" wide, 10 1/4" stick, 9 3/4" curl cyl, 14" pin to pin, 2" stick pin dia, 1 3/4" curl pin dia, 3 teeth

SKIDSTEER BUCKET, 72" WIDE, 32" DEEP, 20" TALL, WELD ON CUTTING EDGE, STANDARD SKIDSTEER COUPLER

50" wide, 15 1/4" stick width, 3 1/2" pin diameter, 19 1/2" center to center

60" wide, 5 1/2 x 3" bottom wear plates, universal quick tach, designed for loaders w/1,300# cap, gray in color, new

13' 6" wide, quick tach mounts, spring loaded cutting edge.

10' 1" wide, 43" tall, 8' long, very low hrs of use, came off a JD 700J dozer, reversable cutting edge

Forklift mast w/cylinder & carriage, 3 stage

39" wide, 12 1/4" inside mounts, 17 1/2" pin to pin, 3 1/8" pin dia, 5 teeth w/ welded on smooth edge, rear lifting eye, very good condition

SKIDSTEER BUCKET, 72" WIDE, 32" DEEP, 20" TALL, WELD ON CUTTING EDGE, STANDARD SKIDSTEER COUPLER

80mm pins, 311 mm inside mounts, 12 1/4" inside mounts, 3 1/8" pin diameter, 18 1/8" pin to pin, 45" wide, 5 teeth, yellow in color

Set of 2 rails w/pads & 2 idlers, 40 links, 24" pads, 30%

30" wide, 12 5/16" between mounts, 17 1/2" pin to pin, 3 1/8" pin dia, 4 teeth, side cutters

1" diameter cable, mechanical driven winch, controls, green in color

59" tall, 48" wide, 73" long, tinted glass, interior light, wiper motor, black in color

80 mm pins, 311 mm inside mounts, (12 1/4" inside mounts), 3 1/8" pin dia, 18 1/8" pin to pin, 45" wide, fits Cat 318, 320L, 320BL, 320CL, 322BL, EL200B and others, 5 teeth

Set of rubber tracks, 42 links/pins, 10" wide, about 55" long