Construction Attachments Attachments For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Wipers: The wiper assembly is present with the cab shell. Operators Seat: No seat. Interior Panels, Covers, Vents: There are a few panels with this cab shell.

Description: All of the pin holes on this boom appear to be in decent shape. Weight: 6,200 lbs. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long No cracks or repairs have been found..

The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long No warping appears to be present.

On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long The rest of the boom looks good.

All of the other pin holes look good. Weight: 2100 lbs. Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. There are no cracks or repairs present on this stick.

All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long This stick has a thumb mount welded to the bottom of it.

Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Weight: 3,800 lbs. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long No cracks have been found.

Stick Information

ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. CONTROL LINKAGE HAS SOME WEAR. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. HAS A/C WHICH IS NOT WORKING.

All of the pin holes appear to be in good shape and no cracks or repairs have been found. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has a thumb mount welded to it.

All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long

Angling Frame: The pin holes for where the angling frame is pinned to the machine have a small amount of wear. Long Angling Frame Dimensions: 4 ft. All of the other pin holes appear to be in good shape.

Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Description: All of the pin holes on this boom are in good shape and no cracks have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Description: All of the pin holes on this boom appear to be in good shape. Weight: 2,000 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long No cracks or repairs have been found.

All of the pin holes appear to be in good shape. This stick has a mount welded to the bottom of it. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long.

Hydraulic cylinders: Boom cylinders-The working condition of these cylinders is unknown. All pin holes appear to be in good shape.and no cracks can be seen. Boom to mid-section cylinder-The working condition of this cylinder is unknown.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

There two cracks on this stick (see photos) near where the stick cylinder pins to it. Weight: 1,600 lbs. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has whats left of a thumb mount, welded to it.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

All of the pin holes look good and no cracks have been found. Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it.

Description: All of the pin holes appear to be in good shape and no cracks have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Weight: 4,500 lbs.