Biopharm Fittings

Training problems will be identified and dissected, with you involved to facilitate making a deep meaningful connection with your horse so you can recognize needs and have the tools to bring out the best in them.

When a water distribution project requires low cost materials, a system that utilizes PEX tubing, barb fittings and manifolds is a good choice. The SharkBite Connection System offers an extensive line of barb fittings plus manifolds, supports and tools...

These handy goof plugs allow you to move around drip irrigation fittings and emitters by plugging the holes in the main line. Double sided plugs can plug holes from .16 to .235" in diameter.

This handy, cost effective key punch is great for creating small pilot holes in header/mainline tubing to attach emitters and fittings. Punch creates a 1/8" hole.

If you want to reconfigure your irrigation system, or even if you just punched a hole in the wrong place, these goof plugs completely seal any hole in the header pipe. Compatible with any of our Drip Irrigation Kits.

These Power-Loc elbows for 1 inch irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system.

These Power-Loc Tees for 1 inch header pipes allow you more flexibility in your irrigation system design. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system.

These Power-Loc Tees for 3/4 inch header pipes allow you more flexibility in your drip irrigation system design. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system.

These adaptors allow you to easily connect to your irrigation main line tubing to hose ends, filters and other irrigation attachments. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

Quickly install drip line valves!

Fix any damaged or leaky drip tape. Creates a tight seal and allows the drip tape to function as normal. Simply cute the drip line in two, removing the damaged area, then attach each end to the coupling.

These Power-Loc couplings for 1 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system.

These Power-Loc couplings for 1/2 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your...

These Power-Loc elbows for 3/4 inch drip irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to...

Each kit contains 5 drip line valves and 5 drip line end sleeves.

These closures for 3/4 inch header pipes are a perfect way to cap off your drip irrigation watering system. Closures also feature a removable cap to allow you to easily flush your system.

These drip irrigation closures for 1 inch header pipes are a perfect way to cap off your watering system. Closures also feature a removable cap to allow you to easily flush your system.

These Power-Loc Tees for 1/2 inch header pipes allow you more flexibility in your irrigation system design. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system.

Drill two holes into your stand to attach the mounting brackets. A pair of side rails to fit your milking stanchion or fitting stand. Powder coated finish. Provides stability and safety, allowing one person to attend to animal.

5 adjustable head units, 6' long, 4' wide, 2' high. Floor not included.

The newly designed aluminum head piece assembly adjusts in height from 25" to 44" above the platform. The stand is equipped with durable steel legs, and the front legs telescope in height.

These Power-Loc elbows for 1/2 inch header pipes allow you more flexibility and the ability to add 90 degree angles in your drip irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system.

These irrigation adaptors allow you to easily connect to your main line tubing to hose ends, filters and other irrigation attachments. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

This handy T-Punch tool allows you to punch holes in you header pipe to attach drip emitters and other attachments. To make a larger ¼" hole press the knob on the handle into the 1/8" hole to expand it.

These watering system adaptors allow you to easily connect to your irrigations' main line tubing to hose ends, filters and other irrigation attachments. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

These Power-Loc couplings for 3/4 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your...

Front legs adjust up and down to level the stand or to elevate the front of the animal. Hinge pins help keep legs secure when carrying. Plastic chain holds animal's head in place. Lightweight lamb trimming stand with straight headpiece is easy to carry...