Backhoe And Excavator Attachments Farm Equipment For Sale In Wooster

Auxiliary Hydraulics Flow 23.1 / 40.0 gpm Travel Speed (Low / High) 5.0 / 7.3 mph Reach @ Maximum Height 40.7” Height to Hinge Pin 128.6” Ground Pressure 4.4 psi. V3800-Tier 4 Kubota Final Tier 4 Diesel Engine ISO Operating Pattern 4 Cylinder, 4 Cycle,...

NM, ETA FALL OF 2017, 2014 TX GATOR, DLX CARGO BOX, BRAKE LIGHTS, GOOD SHAPE

MUDBUCKET HYD hours: 0

B.G., FRONT MOUNTED MOWER CONDITIONER FOR USE WITH JD 388 REAR MOUNTED MOWER CONDITIONER, 28'6" TOTAL WIDTH OF CUT, 1000 RPM PTO, IMPELLER CONDITIONING, 3 YEARS AND ONLY 3600 ACRES OF USE

Skid steer backhoe with 16" bucket and universal quick attach

JM, ETA WINTER 2017, 2007 MILLERPRO 310 AVALANCHE MERGER, 30' CONTINOUS MERGER, BELTS ALL IN GOOD SHAPE, FEW P/U TEETH NEED REPLACED, ROLLERS IN GOOD CONDITION, 2 OWNERS, APPROX 7000 TOTAL ACERS ON MACHINE, CUSTOMER REBUILDING HEAD ON LEFT SIDE OF MACHINE

Erskine 73" Standard Flow Snow blower for a Skid steer. Little use, great condition., Standard Flow Magnetic Joystick Control Will work on any make of skid steer. Magnetic Joystick mount for spout rotation and deflector angle connects to battery for power.

It has skid steer quick attach. Good unit, no bends, welds or damage. Rear weights and stabilizers are available for skid loader for additional cost.

B.G., 34' CONTINUOUS HEAD MERGER, GOOD CONDITION, B.G., 34' CONTINUOUS HEAD MERGER, GOOD CONDITION

DR: ETA Winter 2017; 2011 OxBo 334 Merger; 34' Working width; 3 Pick Up Heads; 2 Point Hook-Up; 1000PTO Pump; Control Box; Belts look good; Needs PTO Shield; Cams Look ok slightly rounded; Some Pick up Teeth need replaced; Skid Plates look good., 34'...

Grimm Ground Drive Tedder, Reconditioned and field ready, currently in use!

Good working order. 7' cut, category one hitch.

9' cut sicklebar mower.

On consignment, not on lot Hydraulic drive, left or right side discharge, nice looking unit.

7'2" cutting width, 3 point, 540 pto Additional Information

WIDE PICK-UP (ACTIVE) - TANDEMS W/ BRAKES - COMFORT OPERATING SYSTEM - CCI 2000 MONITOR Number of Bales: 14,254

Dual drive rear tires, Honda engine, all hydraulic drive, auto shut start/shut off

B.G., 34' CONTINUOUS HEAD MERGER, APPROX 17,000 ACRES OF USE, VERY GOOD CONDITION.

3500 BALES - EXTRASTORAGE FOR WRAP - CABLE CONTROLS

DR: ETA Spring 2018; 2016 L340; EST 1200 Bales; PreCutter (23 Knifes); ISO Hook Up- No Monitor; Roller Chute; Pick Up Gauge wheels; 550/45/22.5 Tandem Tires with Hydraulic Brakes: 80%; Silage Kit; Bale Drop Sensor; Auto Greese; 23 Filler Plates; LED Field...

JM, ETA WINTER 2017, 2007 MILLERPRO 310 AVALANCHE MERGER, 30' CONTINOUS MERGER, BELTS ALL IN GOOD SHAPE, FEW P/U TEETH NEED REPLACED, ROLLERS IN GOOD CONDITION, 2 OWNERS, APPROX 7000 TOTAL ACERS ON MACHINE, CUSTOMER REBUILDING HEAD ON LEFT SIDE OF MACHINE,...

6 rotor tedder, hydraulic fold.

No hydraulics required. 4 spinner tedder, has good teeth.

8 WHEEL TRAILER RAKE, NO CENTER KICKER WHEEL KIT