Agiseek home

Automatic Sliding 5th Wheel Hitch

Become a Partner
2012 Case IH HITCH
Prices start at : 500.00 USD

REAR HITCH FOR FLAGSHIP COMBINE, horsepower: 0, Hours: 0
  • Make: Case IH
  • Year: 2012
  • Fits to Category: Miscellaneous Equipment
  • New: Used
Ohio
PLAIN CITY
3,500 lb Silver Coupler Repair Kit
Prices start at : 9.99 USD

  •  Model # A230
  •  Shipping Dimensions: Approximately 9 x 4 x 4 inches.
  •  This product cannot be shipped to: CA
  •  Kit contains the clamping mechanism that, when latched, holds the coupler tightly to the towing hitch ball
Wisconsin
Appleton
High-Strength Steel Chrome Trailer Ball
Prices start at : 7.19 USD

  •  Lifetime limited manufacturer's warranty
  •  Hitch receiver size compatibility of 2 in
  •  Weight: Approximately: 2 to 4 pounds depending on selected size
  •  Able to tow most standard-duty and heavy-duty trailers such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers
  •  Curt trailer balls are designed for strength, ease of use, and to get you to your destination without hassle
  •  Tested for safety to meet U.S. VESC V-5 specifications
Wisconsin
Appleton
Sway Control Kit
Prices start at : 47.99 USD

  •  Spacer plate ensures proper alignment of trailer ball attachment
  •  Included weld-on sway tab allows for use with most ball mounts
  •  Weight: Approximately: 16 pounds
  •  Helps limit lateral trailer movement to reduce sway
  •  Compatible with most A-frame trailers (some drilling required)
  •  Fits most weight distribution hitches or a sway tab mount # 45820
Wisconsin
Appleton
1 in to 0.75 in Reducer Bushing
Prices start at : 2.29 USD

  •  Model # 21101
  •  Protected by a durable yellow zinc finish to prevent rust and corrosion
  •  1-year limited manufacturer's warranty
  •  Reduces hole size from 1 in to 0.75 in, allowing use of trailer balls with smaller shank diameters
  •  Shipping Dimensions: Approximately 6 x 3 x 1 inches.
Wisconsin
Appleton
Ford Hitch Brake Light
Prices start at : 14.99 USD

Love it! Hitch cover sticks out about 1.5 hitches after foam pad, so not protecting much. I own a 2017 Ford Escape. Lights up with light on, heavier glow with brakes and blinks when turning.
  •  This product cannot be shipped to: CA
  •  Ford logo lights up when the brakes are applied
  •  Shipping Dimensions: Approximately 5.5 x 4.5 x 4 inches.
  •  Bully hitch covers install in seconds and provide a quick, easy, and cost-effective way to personalize your vehicle while protecting your trailer hitch
  •  Locking hitch pin recommended
  •  Officially licensed Ford product
Wisconsin
Appleton
1 in Replacement Trailer Ball Nut & Washer
Prices start at : 2.79 USD

  •  Protected by a durable zinc plated finish
  •  Shipping Dimensions: Approximately 7 x 3 x 2 inches.
  •  Weight: Approximately: .4 pounds
  •  1-year limited manufacturer's warranty
  •  Nut fits a 1 in diameter trailer ball shanks with fine threads
  •  Tested for safety to meet US VESC V-5 specifications
Wisconsin
Appleton
Dual Hitch Extension
Prices start at : 48.99 USD

  •  This product cannot be shipped to: CA
  •  Model # 1804010
  •  Center of pin hole in lower tube to top of upper tube measures 7.5 in
  •  Bottom of lower tube to top of upper tube measures 8.8125 in
  •  Shipping Dimensions: Approximately 18.5 x 9.5 x 3.5 inches.
  •  Top of lower tube to bottom of upper tube measures 3.625 in
Wisconsin
Appleton
5,000 lb Black Rust Resistant Receiver Hitch Steel Box
Prices start at : 44.99 USD

  •  Strengthened with a cast, welded, seamless collar
  •  Model # 19030
  •  Constructed of steel with a rust resistant liquid Bonderite coating followed by a gloss black powder coat finish
  •  Fits most factory steel bumpers
  •  Equipped with an open-back receiver for easy cleaning
  •  Weight: Approximately: 12 pounds
Wisconsin
Appleton
Margaritaville Hitch Cover
Prices start at : 9.29 USD

  •  Add some personality to your vehicle with this Margaritaville hitch cover from Trik Topz
  •  Shipping Dimensions: Approximately 6 x 5.25 x 3.5 inches.
  •  High impact ABS construction
  •  No tools necessary
  •  Weight: Approximately: .28 pounds
  •  This product cannot be shipped to: CA
Wisconsin
Appleton
Hitch Ball Cover
Prices start at : 3.99 USD

  •  Shipping Dimensions: Approximately 4 x 3 x 3 inches.
  •  This product cannot be shipped to: CA
  •  Model # BC-985M
  •  The Larin hitch ball cover is for protecting our trailer ball when not in use
Wisconsin
Appleton
6,000 - 7,500 lb Reversible Steel Ball & Mount
Prices start at : 36.09 USD

  •  CURT Has taken the hassle out of switching ball mounts and keeping track of what ball mount fits which coupler
  •  Permanently attached trailer balls cannot be loosened or stolen
  •  Shipping Dimensions: Approximately 15 x 8 x 3 inches.
  •  Constructed from sturdy steel with a black powder coated finish
  •  Features a 1-7/8 in ball with 4 in drop and a 2 in ball that provides a 2 in rise
  •  This product cannot be shipped to: CA
Wisconsin
Appleton
0.75 in Replacement Trailer Ball Nut & Washer
Prices start at : 2.79 USD

  •  Constructed from high strength steel
  •  Model # 40103
  •  Nut fits a 0.75 in diameter trailer ball shanks with fine threads
  •  Tested for safety to meet US VESC V-5 specifications
  •  Helical lock washer ensures a secure mount
  •  1-year limited manufacturer's warranty
Wisconsin
Appleton
Quick-Lock 5,000 lb Black A-frame Trailer Coupler
Prices start at : 37.99 USD

  •  Class 3 A-frame coupler
  •  Includes hole for mounting jack through coupler
  •  Weight: Approximately: 7.06 pounds
  •  5,000 lb capacity
  •  Shipping Dimensions: Approximately 13.5 x 9.25 x 4.5 inches.
  •  Meets all requirements for SAE J684 and VESC V5
Wisconsin
Appleton
1-7/8 in Ball Class 1-4 Coupler Repair kit
Prices start at : 11.99 USD

  •  This is easy to assembly and can be adjusted by hand without any tools
  •  Shipping Dimensions: Approximately 9.75 x 3.5 x 2 inches.
  •  Meets SAE and V5 standards
  •  This product cannot be shipped to: CA
  •  Model # 6256-1
  •  Fits 1-7/8 in ball
Wisconsin
Appleton
Receiver Hitch Mounted Utility Step
Prices start at : 35.99 USD

  •  Shipping Dimensions: Approximately 20 x 11 x 3.5 inches.
  •  This product cannot be shipped to: CA
  •  Item measures 20 in L x 12 in W x 4 in H
  •  Made from polished T-304 stainless steel with non-skid step pad
  •  Weight: Approximately: 5.5 pounds
  •  Bully hitch steps make it easy to access the truck bed, roof racks, or trunk area
Wisconsin
Appleton
2 in to 1.25 in Receiver Tube Adapter
Prices start at : 20.59 USD

  •  Extends receiver tube by 4 in for added clearance
  •  This Curt receiver tube adapter reduces a 2 in receiver tube opening to fit a 1.25 in shank
  •  1-year limited manufacturer's warranty
  •  Gross trailer weight capacity of 3,500 lb
  •  Protected by a gloss powder coat finish
  •  Tongue weight rating of 350 lb
Wisconsin
Appleton
18 in Receiver Tube Extender
Prices start at : 47.99 USD

  •  Model # 45796
  •  Constructed from solid, forged steel for superior strength
  •  Weight: Approximately: 19 pounds
  •  Tongue weight rating of 350 lb
  •  Gross trailer weight capacity of 3,500 lb
  •  CNC-formed, robotically welded, and mechanically descaled for a perfect fit
Wisconsin
Appleton
Dodge Hitch Brake Light
Prices start at : 14.99 USD

  •  Dodge logo lights up when the brakes are applied
  •  Item measures 5.5 in L x 4.8 in W x 4 in H
  •  Shipping Dimensions: Approximately 5.5 x 4.5 x 4 inches.
  •  Weight: Approximately: .4 pounds
  •  Locking hitch pin recommended
  •  Officially licensed Dodge product
Wisconsin
Appleton
511 W. 5TH STREET BELOIT, KS
Prices start at : 79500 USD

The backyard is landscaped with hundreds of varieties of plants, and when everything is in bloom, it is just beautiful. It is approximately 1250 sq foot. Residential Listings: PRICE REDUCEDNewly listed is a very nice sized 2 bedroom/1 bathroom...
  • Condition: Used
  • Serial Number: UNKNOWN
  • Quantity: 1
Kansas
Beloit
2018 MDS CLASS II RECEIVER HITCH
Price : CALL

Heavy Duty 1/4" Plate Fits All 1995 and Newer Skid Steer Models MDS Skid Steer Receiver Hitch Plate.
  • New: New
  • Fits to Category: Other Equipment - Loaders
  • Year: 2018
Iowa
LU VERNE
Hitch Cover - World\'s Greatest Golfer
Prices start at : 9.99 USD

  •  Shipping Dimensions: Approximately 6 x 5.25 x 3.5 inches.
  •  Weight: Approximately: .28 pounds
  •  Made in the USA
  •  3D polyurethane domed decal
  •  This product cannot be shipped to: CA
Wisconsin
Appleton
6,000 - 8,000 lb High-Strength Steel Switch Ball Set
Prices start at : 30.99 USD

You don't even need any tools or pins - the special J-groove design lets you twist the ball on and off single-handedly. It lets you change between 2 inch and 2-5/16 inch trailer balls so you can haul a wide variety of trailers and accessories.
  •  Exclusive 'J' groove design ensures a secure system
  •  No tools, coins or pins required for trailer bait installation
  •  CURT Switch Ball trailer balls are a breakthrough in trailer ball technology
  •  Weight: Approximately: 4 pounds
  •  Constructed high-strength steel with a durable nickel-chrome plating
  •  This product cannot be shipped to: CA
Wisconsin
Appleton
1-7/8 in & 2 in Zinc Plated TUFFPLATE w/ Gripper Handle
Prices start at : 7.99 USD

  •  Features a large, comfortable hand grip
  •  Weight: Approximately: 1 pounds
  •  Fits 1-7/8 in and 2 in couplers by bolting into the side, with universal mounting holes
  •  Ideal for personal watercraft and other lightweight trailers
  •  For all class 1, 2, or 3 couplers
  •  Shipping Dimensions: Approximately 8.25 x 5.75 x 1.75 inches.
Wisconsin
Appleton
The Boss Hitch Cover
Prices start at : 9.29 USD

  •  This product cannot be shipped to: CA
  •  High impact ABS construction
  •  Corrosion resistant
  •  3D polyurethane domed decal
  •  Add some attitude to your vehicle with The Boss hitch cover from Trik Topz
  •  Model # 3646
Wisconsin
Appleton
Adjustable Pintle Mount
Prices start at : 41.99 USD

  •  Gross trailer weight capacity of 10,000 lb
  •  Shank constructed from solid steel for optimum strength
  •  Series of mounting holes provide 3 different mounting heights for the hook
  •  Model # 48323
  •  Because of their simple design, pintle hitches are able to have thicker metal construction and more secure coupling
  •  This product cannot be shipped to: CA
Wisconsin
Appleton
Zinc Plated Trailer Coupler
Prices start at : 13.99 USD

  •  Shipping Dimensions: Approximately 9 x 4 x 3 inches to 9.75 x 4 x 3.5 inches depending on size selected.
  •  Includes 1 coupler, 1 pin, and 1 chain
  •  Weight: Approximately: 2.8 to 3 pounds depending on selected size
  •  When replacing a broken coupler or installing a new one, you can depend on Dutton-Lainson couplers
  •  2,000 lb capacity
Wisconsin
Appleton