Auto Maintenance Parts Engine Ignition For Sale In Virginia

• ✓ Sharp heavy-duty steel probe
• ✓ Tests 6-24 V DC systems
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Bulb is easy to remove for replacement
• ✓ Strain relief protects test lead at base of test light

• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Weight: Approximately: .1 pounds
• ✓ Part Number - 27174

• ✓ Standard 1-1/2 in. black dials
• ✓ Features black bezel with removable black mounting panel
• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Includes gauge & mounting hardware
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges

• ✓ New regulators and diode trios on delco SI type
• ✓ New insulators & hardware
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Chrome construction with red LED
• ✓ Weight: Approximately: .07 pounds
• ✓ Snap-in design for easy fit
• ✓ 3 Amp

• ✓ Weight: Approximately: 8.05 pounds
• ✓ Armatures cleaned inspected and polished
• ✓ New bushings & bearings
• ✓ Brush leads welded, not soldered
• ✓ New brushes & brush springs
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 45878
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ This product cannot be shipped to: CA
• ✓ With jiggle pin

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ New brushes, brush springs and bearings
• ✓ New insulators & hardware
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ Weight: Approximately: .05 pounds
• ✓ This product cannot be shipped to: CA
• ✓ (2.0mm2) .250 in. tab (6.4mm)

• ✓ 180 degrees SuperStat
• ✓ This product cannot be shipped to: CA
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Premium thermostat
• ✓ Weight: Approximately: .15 pounds

• ✓ On-Off SPST
• ✓ Rocker switches are an economical & space-saving alternative to multiple switches
• ✓ Black oval with dot
• ✓ Weight: Approximately: .04 pounds

• ✓ Quality parts, OEM specifications or better
• ✓ Made in the USA
• ✓ Contains snap ring & snap ring retainer
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Help Hotline toll-free number printed on kit
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ Weight: Approximately: .34 pounds
• ✓ Includes 2 removable keys

• ✓ Dura lube gear-driven splash lubrication continuously applies oil to all internal parts
• ✓ Horizontal engine
• ✓ Dual ball bearings reduce wear for long life
• ✓ Maintenance-free magnetron electronic ignition for quick, dependable starts

• Returnable: 90-Day
• Product Depth (in.): 17

• Fits Brands: Briggs & Stratton
• Fits Quantum, Max and Europa series engines: Yes
• Manufacturer Warranty: None
• Used With Equipment Type: Walk-Behind Mower
• Returnable: 90-Day
• Fits Models: Fits Quantum, Max and Europa series engines 2011 and prior

• ✓ Keeps the trimmer belt safely covered
• ✓ 1 replacement belt guard

• Fits Brands: Swisher
• Part Type: Engine Part
• Used With Equipment Type: String Trimmer
• Returnable: 90-Day

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day
• Product Height (in.): 2.5
• Product Width (in.): 11.25

• ✓ Compatible with Magliner 2-wheel hand trucks
• ✓ Main pocket is 12 in. L x 8 in. W x 2 in. D with 1 self-adhesive strap
• ✓ Overall size is 13 in. L x 8 in. W

• Product Depth (in.): 15.5
• Fits Brands: Magliner
• Fits Models: All Magliner brand hand trucks

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Width (in.): 4
• Part Type: Engine Part
• Engine Part Type: Armature
• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• ✓ 1.7 Gal. fuel tank which at half load can run over 3 hours on a single tank of fuel
• ✓ EPA approved for safe use in mandated areas

• Recommended Oil Type: SAE 5W-30
• Product Depth (in.): 20.47
• Part Type: Engine
• Manufacturer Warranty: One Year Parts Warranty

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 0.25
• Product Depth (in.): 6

• Fits Brands: Briggs & Stratton
• Manufacturer Warranty: Consumer Use: 2 Years / Commercial Use: 1 Year
• Engine Make: Briggs and Stratton
• Certifications and Listings: CARB Compliant,EPA Approved
• Orientation: Horizontal
• Dura-bore cast iron cylinder sleeve for extended life: Yes

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Product Height (in.): 1.5
• Product Depth (in.): 2
• Returnable: 90-Day

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Engine Part Type: Gasket
• Product Height (in.): 6

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Returnable: 90-Day
• Part Type: Engine Part
• Engine Part Type: Carburetor Kit
• Product Depth (in.): 4

• ✓ Gear shaft: 3/4 in. Dia x 2 in. L, 6:1 gear reduction, CCW rotation, keyway
• ✓ Dura-bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control
• ✓ Maintenance-free magnetron electronic ignition for quick, dependable starts
• ✓ Horizontal engine
• ✓ Float-feed carburetor

• Product Height (in.): 17

88 in

• Manufacturer Warranty: 1 yr Limited
• Part Type: Engine Part
• Briggs & Stratton genuine product: Yes
• Product Width (in.): 88 in
• Product Depth (in.): 88 in
• Hub Required: No hub connection available