Auto Maintenance Parts Engine Ignition For Sale In Vancouver

• ✓ 1/2 in. round mounting hole
• ✓ Weight: Approximately: .04 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.

• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures
• ✓ Part Number - 27280

• ✓ Made from high quality material
• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27271

• ✓ Features black bezel with removable black mounting panel
• ✓ Only for 12 Volt negative ground systems
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: 1.25 pounds
• ✓ Includes 12 Volt internal backlighting
• ✓ Standard 1-1/2 in. black dials

• ✓ This product cannot be shipped to: CA
• ✓ Brush leads welded, not soldered
• ✓ New brushes & brush springs
• ✓ Shipping Dimensions: Approximately 13.25 x 7.25 x 6.63 inches.
• ✓ Armatures cleaned inspected and polished
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies

• ✓ Use with ATO fuses up to 15 amps
• ✓ Weight: Approximately: .13 pounds
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: .07 pounds
• ✓ 3 Amp
• ✓ Snap-in design for easy fit
• ✓ This product cannot be shipped to: CA

• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Premium thermostat
• ✓ With jiggle pin
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life

• ✓ This product cannot be shipped to: CA
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ (2.0mm2) .250 in. tab (6.4mm)

• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Weight: Approximately: .48 pounds
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ Clear handle & bright bulb for high visibility
• ✓ Tests 6-24 V DC systems

• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ This product cannot be shipped to: CA
• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New regulators and diode trios on delco SI type
• ✓ Additional exchange fees may apply
• ✓ New insulators & hardware

• ✓ Bent tip ensures easy insertion into the tie head
• ✓ This product cannot be shipped to: CA
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)
• ✓ 4 in. cable ties - 18 lbs. tensile strength
• ✓ Durable 6/6 pure virgin nylon material

• ✓ Weight: Approximately: .1 pounds
• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ This product cannot be shipped to: CA

• ✓ Blue
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Replaces 807829, 691656, 555375GS and 790951
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Pulley
• Product Height (in.): 2.188
• Part Type: Engine Part

• ✓ 0.95 gallon fuel capacity
• ✓ Low oil shutdown protection
• ✓ CARB approved (CA models only)

• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications
• Oil Capacity (oz.): 20.1
• Product Width (in.): 15

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Carburetor
• Product Depth (in.): 2.781
• Product Width (in.): 4

• ✓ Resistant to corrosion
• ✓ Reinforced material in high-stress areas prevents breakage under heavy loads

• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Part Type: Wheel/Tire
• Product Depth (in.): 18
• Fits Brands: Magliner

1.75

• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 1.75
• Product Width (in.): 1.75
• There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes
• Engine Part Type: Seal

• Product Width (in.): 0.5
• Fits Models: Most Models
• Part Type: Engine Part
• Engine Part Type: Fuel
• Used With Equipment Type: Blower,Chainsaw,String Trimmer
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty

• ✓ Includes muffler and exhaust manifold
• ✓ Includes all mounting hardware and gaskets

• Oil Capacity (oz.): 0
• Certifications and Listings: No Certifications or Listings
• Product Depth (in.): 16
• Engine Make: Subaru

• Product Width (in.): 12
• Part Type: Wheel/Tire
• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Fits Models: All Magliner brand hand trucks
• Used With Equipment Type: Utility
• Gemini Sr. hand truck not included: Yes

• ✓ For use with select Swisher trimmers
• ✓ Genuine Swisher replacement part
• ✓ Protects your yard from damage

• Fits Brands: Swisher
• Product Depth (in.): 4
• Part Type: Edger Blade

• ✓ 6.5 maximum horse power / 196cc displacement
• ✓ 0.95 Gal. fuel capacity
• ✓ Single cylinder

• Returnable: 90-Day
• Product Depth (in.): 17
• Used With Equipment Type: Utility

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Weight: Approximately: .2 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 14078
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.