Auto Maintenance Parts Engine Ignition For Sale In Tampa

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27272
• ✓ 1.88 in. outside diameter
• ✓ Resistant to high temperatures

• ✓ (2.0mm2) .250 in. tab (6.4mm)
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Weight: Approximately: .6 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Made in the USA
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Quality parts, OEM specifications or better

• ✓ Weight: Approximately: .4 pounds
• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems
• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: 12.7 pounds
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ This product cannot be shipped to: CA
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded

• ✓ Weight: Approximately: .29 pounds
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Red

• ✓ Additional exchange fees may apply
• ✓ Weight: Approximately: 10.5 pounds
• ✓ New brushes, brush springs and bearings
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All external mounting holes re-threaded

• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures
• ✓ Part Number - 27280

• ✓ This product cannot be shipped to: CA
• ✓ 5.5mm2
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Simply crimp both ends for a long-lasting, secure connection

• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ New brushes & brush springs
• ✓ Weight: Approximately: 8.05 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Additional exchange fees may apply
• ✓ Shipping Dimensions: Approximately 13.25 x 7.25 x 6.63 inches.

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .03 pounds
• ✓ Blue
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• Brand: SPU
• Fits Redmax Trimmer Chainsaws Brush Cutter T207071200: Yes
• Model: 0413USBCF1O

• ✓ Weight: Approximately: 12.5 pounds
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All external mounting holes re-threaded
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Rotors electronically tested for amperage & insulation quality

• ✓ Weight: Approximately: .34 pounds
• ✓ 1/4 in. terminal
• ✓ Button terminals
• ✓ Includes 2 removable keys

• ✓ Rocker switches are an economical & space-saving alternative to multiple switches
• ✓ Black oval with dot
• ✓ This product cannot be shipped to: CA
• ✓ On-Off SPST

• ✓ Keeps the trimmer belt safely covered
• ✓ Constructed of hard plastic

• Used With Equipment Type: String Trimmer
• Fits Brands: Swisher
• Fits Models: DST67522BS, ST50022DX, ST6002212V, ST60022DLX, ST60022DXQ, ST60022DXQ12V, ST65022DLX, ST65022DXQ, ST
• Part Type: Engine Part

• ✓ Replaces missing or damaged gas cap
• ✓ Fits on KOHLER XT-6 series walk behind engines

• Part Type: Engine Part
• Product Height (in.): 1
• Returnable: 90-Day
• Manufacturer Warranty: None

• ✓ Snap-in design for easy fit
• ✓ Red incandescent indicator lamp LED
• ✓ Chrome construction with red LED
• ✓ 3 Amp

• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 4.25
• Returnable: 90-Day
• Part Type: Engine Part
• Engine Part Type: Control Bracket
• Product Height (in.): 2.25

• ✓ Quality tested performance
• ✓ 1-year parts warranty
• ✓ Use on 12-Volt starters

• Product Width (in.): 3.25
• Part Type: Engine Part
• Product Height (in.): 3.75

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Manufacturer Warranty: 1 year limited
• Product Height (in.): 3
• Product Depth (in.): 1.5

Yard Machines, Troy-Bilt, Remington, Yard-Man, Bolens, MTD

• Fits Models: Yard Machines, Troy-Bilt, Remington, Yard-Man, Bolens, MTD
• Returnable: 90-Day
• Fits Brands: Yard Machines, Troy-Bilt, Remington, Yard-Man, Bolens, MTD
• Manufacturer Warranty: 90-Day Limited Warranty
• Product Height (in.): 9
• Part Type: Engine Part

• ✓ Fits models SJ620, SJ621, SJ622E, SJ623E, SJM988
• ✓ Replacement wearing plates

• Used With Equipment Type: Snow Blower
• Product Height (in.): 1 in
• Product Width (in.): 1.2 in
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Width (in.): 5.25
• Product Depth (in.): 0.188
• Product Height (in.): 4.25

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Height (in.): 5
• Product Depth (in.): 4
• Manufacturer Warranty: One year limited warranty

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Width (in.): 3
• Product Height (in.): .5
• Engine Part Type: Cap

• ✓ Features black bezel with removable black mounting panel
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Standard 1-1/2 in. black dials
• ✓ Includes gauge & mounting hardware
• ✓ Weight: Approximately: 1.25 pounds
• ✓ Only for 12 Volt negative ground systems