Auto Maintenance Parts Engine Ignition For Sale In San Francisco

• ✓ Part Number - 27280
• ✓ 2 in. outside diameter
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Black oval with dot
• ✓ 1/2 in. round mounting hole
• ✓ Weight: Approximately: .04 pounds

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Part Number - 27271
• ✓ Resistant to high temperatures
• ✓ Weight: Approximately: .2 pounds

• ✓ Sharp heavy-duty steel probe
• ✓ Tests 6-24 V DC systems
• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ Strain relief protects test lead at base of test light
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ This product cannot be shipped to: CA

• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Features black bezel with removable black mounting panel
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Includes 12 Volt internal backlighting
• ✓ Includes gauge & mounting hardware

• ✓ New regulators and diode trios on delco SI type
• ✓ New brushes, brush springs and bearings
• ✓ Additional exchange fees may apply
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ Standard flow
• ✓ Stainless steel
• ✓ The heat motor is 100 percent calibrated to ensure quality and performance
• ✓ Weight: Approximately: .2 pounds
• ✓ 190 degrees

• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Weight: Approximately: .9 pounds
• ✓ UV black color
• ✓ This product cannot be shipped to: CA
• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties

• ✓ 5.5mm2
• ✓ Weight: Approximately: .09 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Simply crimp both ends for a long-lasting, secure connection

• ✓ Help Hotline toll-free number printed on kit
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x .75 inches.
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Quality parts, OEM specifications or better

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures
• ✓ 2.15 in. outside diameter

• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 180 degrees bottom by-pass
• ✓ With 1 seal

• ✓ Fits Redmax Trimmer Chainsaws Brush Cutter T207071200
• ✓ Ships from the USA!

• Brand: SPU

• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Weight: Approximately: .29 pounds

6.75 in

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Briggs & Stratton genuine product

• Returnable: 90-Day
• Fits Brands: Briggs and Stratton
• Product Depth (in.): 6.75 in
• Product Width (in.): 6.75 in

• ✓ Replaces 807829, 691656, 555375GS and 790951
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Height (in.): 2.188
• Returnable: 90-Day

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 2.625
• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Product Height (in.): 1.5

• ✓ Features a 1.7 Gal. fuel tank capacity for extended run time
• ✓ Assembled dimension: 18 in. W x 19 in. D x 20 in. H
• ✓ Fuel-shutoff switch for easy transport and maintenance
• ✓ 1.7 Gal. fuel tank capacity for long run times

• Orientation: Horizontal
• Fits Brands: Universal

• ✓ For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS)
• ✓ Save money and install yourself

• Fits Brands: ECHO
• Fits Models: GT-225 / i / L / SF, SRM-225 / i / SB / U / PE-225,PAS-225
• Used With Equipment Type: Trimmer
• Product Height (in.): 6.325 in

• ✓ Vertical engine
• ✓ Advance debris management system with dual seal cartridge protection

• Part Type: Engine
• Orientation: Vertical
• Manufacturer Warranty: Consumer Use: 2 Years / Commercial Use: 2 Years
• Brand/Model Compatibility: Briggs & Stratton replacement engine for Z-Turn and riding mowers.

• ✓ Fits Quantum, Max and Europa series engines
• ✓ Fits Briggs & Stratton engines 2011 and prior
• ✓ Contains 1 gas cap
• ✓ Replaces OE # 397974, 397974S, 5044, 5044B, 692046, 793606, 796577, 07-304, 125-070, 125-660, B1BR74, 6593

• Manufacturer Warranty: None
• Product Width (in.): 3.6

• ✓ Highly efficient splash lubrication system
• ✓ 1-1/8 in. Dia x 3 in. length tapered output shaft

• Orientation: Horizontal
• Brand/Model Compatibility: Lifan
• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications
• Product Height (in.): 18

• ✓ Installs easily
• ✓ Low permeation fuel line
• ✓ Fits most lawn tractors with 1/4 in. i.d. fuel line

• Returnable: 90-Day
• Product Height (in.): 6.63
• Part Type: Engine Part

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

3

• Returnable: 90-Day
• Product Height (in.): 3
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 3

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Air Vane Spring
• Returnable: 90-Day
• Product Depth (in.): .25
• Part Type: Engine Part

• ✓ Ideal for construction equipment, agricultural equipment and recreational vehicles where 13 HP horizontal shaft power is required
• ✓ Splash-lubrication system provides efficiency
• ✓ Oversized muffler with safety heat shield for quiet operation
• ✓ Features low oil shutdown for added protection
• ✓ Fuel-shutoff switch for easy transport and maintenance

• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 0.25
• Engine Part Type: Spring
• Product Height (in.): 1.25
• Manufacturer Warranty: 1 Year Limited