Auto Maintenance Parts Engine Ignition For Sale In Sacramento

• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Features black bezel with removable black mounting panel
• ✓ Includes 12 Volt internal backlighting
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Standard 1-1/2 in. black dials
• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.

• ✓ Grooved
• ✓ Part Number - 27280
• ✓ Made from high quality material
• ✓ Resistant to high temperatures
• ✓ 2 in. outside diameter

• ✓ This product cannot be shipped to: CA
• ✓ (2.0mm2) .250 in. tab (6.4mm)
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Includes multi-tool that strips & cuts wire, crimps ignition & insulated terminals & cuts & rethreads mild steel bolts
• ✓ Weight: Approximately: 4.5 pounds
• ✓ 399 pieces of neatly contained organized within a durable, lightweight, reusable carry-case with handle
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Weight: Approximately: .09 pounds

• ✓ 20 amp circuit breaker
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ This product cannot be shipped to: CA
• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems

• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ With 1 seal
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .26 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Part Number - 27281
• ✓ 2.15 in. outside diameter
• ✓ Resistant to high temperatures
• ✓ Made from high quality material

• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
• ✓ Weight: Approximately: .13 pounds
• ✓ This product cannot be shipped to: CA

• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Contains snap ring & snap ring retainer
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ Quality parts, OEM specifications or better
• ✓ Comes with all parts needed for quality repairs

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Weight: Approximately: .3 pounds
• ✓ Part Number - 14369
• ✓ With check valve & 1 seal
• ✓ 2-15/64 in. x 53/64 in. x 1-41/64 in.

• ✓ Bent tip ensures easy insertion into the tie head
• ✓ This product cannot be shipped to: CA
• ✓ UV black color
• ✓ Durable 6/6 pure virgin nylon material
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties

• ✓ All external mounting holes re-threaded
• ✓ Additional exchange fees may apply
• ✓ Weight: Approximately: 10.5 pounds
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

2.25

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Depth (in.): 2.25
• Product Width (in.): 2.25
• Product Height (in.): .25

• ✓ Bolt-on construction is easy to install
• ✓ Hand truck frame and hardware not included

• Fits Brands: Magliner
• Part Type: Wheel/Tire
• Product Width (in.): 11.5
• Product Depth (in.): 23

• Product Depth (in.): 5.625
• Toro Blower Accessories: Yes
• Fits Models: Toro models: 51574, 51591, 51599, 51602, 51609, 51617, 51618, and 51619 and comes standard on 51621
• Product Width (in.): 4
• Manufacturer Warranty: 2 years
• Product Height (in.): 27.25

• Used With Equipment Type: Walk-Behind Mower
• Engine Part Type: Engine
• Part Type: Engine Part
• Briggs & Stratton: Yes
• Fits Models: Multiple
• Product Height (in.): 3.25

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Width (in.): 2.25
• Returnable: 90-Day
• Product Height (in.): 3.75

• ✓ 1-1/8 in. Dia x 3 in. length tapered output shaft
• ✓ Low oil sensor to protect your engine investment

• Fuel Tank Capacity (gallons): 1.8
• Returnable: 90-Day
• Fits Brands: Lifan
• Part Type: Engine

• There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes
• Product Height (in.): 6.5
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Engine Part Type: Pump
• Product Width (in.): 8.5

• Manufacturer Warranty: See limited engine warranty pdf file
• Engine Displacement (cc): 169
• Part Type: Engine
• Oil Capacity (oz.): 20
• Product Width (in.): 14
• Certifications and Listings: No Certifications or Listings

• Engine Part Type: Miscellaneous Part
• Product Height (in.): 34 in
• Manufacturer Warranty: 1 yr Limited
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Hub Required: No hub connection available
• Part Type: Engine Part

• Manufacturer Warranty: Satisfaction Guaranteed
• Part Type: Tune-Up Kit
• Assembly required: Yes
• Product Height (in.): 2 in
• Used With Equipment Type: Cultivator/ Tiller
• Returnable: 90-Day

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ Weight: Approximately: .34 pounds
• ✓ Button terminals

• Fits Brands: Kohler
• Replaces missing or damaged gas cap: Yes
• Used With Equipment Type: Walk-Behind Mower
• Part Type: Engine Part
• Fits Models: XT-6 series walk behind engines
• Returnable: 90-Day

• Returnable: 90-Day
• Fits Models: 48 in Mower Decks
• Product Depth (in.): 7
• Part Type: Spindle
• Fits 48 in. decks: Yes
• Fits Brands: Craftsman, Husqvarna