Auto Maintenance Parts Engine Ignition For Sale In Rhode Island

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .29 pounds
• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.

• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ New brushes & brush springs
• ✓ Shipping Dimensions: Approximately 13.25 x 7.25 x 6.63 inches.
• ✓ Armatures cleaned inspected and polished
• ✓ New terminal hardware
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies

• ✓ Weight: Approximately: .2 pounds
• ✓ With jiggle pin
• ✓ Part Number - 45878
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Premium thermostat
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ 1/2 in. round mounting hole
• ✓ Rocker switches are an economical & space-saving alternative to multiple switches
• ✓ Weight: Approximately: .04 pounds
• ✓ This product cannot be shipped to: CA

• ✓ Chrome construction with red LED
• ✓ Weight: Approximately: .07 pounds
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Red incandescent indicator lamp LED

• ✓ 195 degrees reverse poppet
• ✓ Weight: Approximately: .3 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ With check valve & 1 seal

• ✓ This product cannot be shipped to: CA
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
• ✓ Use with ATO fuses up to 15 amps

• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ All external mounting holes re-threaded
• ✓ Additional exchange fees may apply
• ✓ Weight: Approximately: 12.7 pounds
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New brushes, brush springs and bearings

• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)

• ✓ New insulators & hardware
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ This product cannot be shipped to: CA

• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ Grooved
• ✓ Part Number - 27272
• ✓ 1.88 in. outside diameter

• ✓ With 1 seal
• ✓ 180 degrees bottom by-pass
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .26 pounds
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.

• ✓ 2 in. outside diameter
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Grooved
• ✓ Weight: Approximately: .2 pounds

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ Weight: Approximately: .1 pounds

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Engine Part Type: Carburetor
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Returnable: 90-Day

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Width (in.): 0.25
• Engine Part Type: Gasket
• Product Depth (in.): 4

• Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes
• Product Depth (in.): 42 in
• Manufacturer Warranty: 1 yr Limited
• Engine Part Type: Miscellaneous Part
• Part Type: Engine Part
• Returnable: 90-Day

• ✓ Compatible with RY40180 and RY40190 Models
• ✓ Optimized for cordless efficiency

• Fits Models: RY40180 and RY40190
• Product Depth (in.): 17.32 in
• Manufacturer Warranty: 30 Day
• Used With Equipment Type: Mower

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty
• Product Height (in.): 6
• Engine Part Type: Gasket

• ✓ Tapered output shaft available
• ✓ 0.75 in. keyway output shaft

• Used With Equipment Type: Utility
• Product Weight (lb.): 48.4lb
• Fits Brands: Universal
• Engine Type: 4 Cycle

8

• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): .25
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Width (in.): 8
• Returnable: 90-Day
• Product Height (in.): 8

• ✓ Fits most 13, 14, 15 and 15.5 GHP intek OHV vertical 210000, 212000, 214000, 215000 model Briggs & Stratton engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Gasket
• Product Height (in.): 5
• Product Width (in.): 0.25
• Manufacturer Warranty: One year limited warranty

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ For most 111000 model Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Depth (in.): 6.75
• Product Height (in.): 9

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Width (in.): 8.25
• Manufacturer Warranty: One year limited warranty
• Product Height (in.): .1

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Width (in.): 2
• Part Type: Engine Part
• Returnable: 90-Day
• Product Height (in.): 3.25

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Depth (in.): 3.438
• Engine Part Type: Carburetor Kit
• Part Type: Engine Part

• Product Height (in.): .75
• Engine Part Type: Air Vane Spring
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Product Depth (in.): .25