Auto Maintenance Parts Engine Ignition For Sale In Prince Edward Island

• ✓ Part Number - 27271
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds

• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New regulators and diode trios on delco SI type
• ✓ New insulators & hardware
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ New regulators and diode trios on delco SI type
• ✓ All external mounting holes re-threaded
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ This product cannot be shipped to: CA
• ✓ Additional exchange fees may apply
• ✓ New brushes, brush springs and bearings

• ✓ This product cannot be shipped to: CA
• ✓ 180 degrees bottom by-pass
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ With 1 seal
• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 195 degrees reverse poppet
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 14369
• ✓ Quality construction ensures exact fit & a long, trouble-free life

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations

• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 45028
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Premium thermostat

• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ Weight: Approximately: .4 pounds
• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems
• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.

• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Black oval with dot
• ✓ This product cannot be shipped to: CA
• ✓ 1/2 in. round mounting hole

• ✓ Button terminals
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .34 pounds

• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Weight: Approximately: .09 pounds
• ✓ This product cannot be shipped to: CA
• ✓ 5.5mm2

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Starter Rope
• Product Depth (in.): 1.625
• Product Width (in.): 6.125

• Returnable: 90-Day
• Used With Equipment Type: Hedge Trimmer
• Product Width (in.): 4 in
• Part Type: Blower Accessory
• Fits HJ604C hedge trimmer: Yes
• Fits Models: HJ604C, HJ605CC

• ✓ Part Number - 27281
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds
• ✓ Grooved
• ✓ This product cannot be shipped to: CA

• ✓ Low oil shutdown protection
• ✓ 6:1 gear reduction available
• ✓ Single cylinder

Universal

• Brand/Model Compatibility: Universal
• Recommended Oil Type: SAE 10W-30
• Fits Brands: Universal

• Product Width (in.): 7
• Product Height (in.): 4
• Fits Models: STD67522BS, STP4422HO, STP67522BS and STS67522BS
• Returnable: 90-Day
• Genuine swisher replacement part: Yes
• Part Type: Edger Blade

• Used With Equipment Type: Generator
• Fits Brands: Generac
• All products come with a 1 year limited warranty: Yes
• Product Height (in.): 3 in
• Part Type: Engine
• Fits Models: 9-22kw Air Cooled Generators

• Product Depth (in.): 5.219
• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Manufacturer Warranty: One year limited warranty
• Product Height (in.): 2.188
• Part Type: Engine Part
• Engine Part Type: Pulley

• ✓ Needle clean-out tool
• ✓ Small head screws (2)

• Returnable: 90-Day
• Part Type: Tune-Up Kit
• Product Width (in.): 0 in
• Fits Brands: Sun Joe

• ✓ With jiggle pin
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Premium thermostat
• ✓ 180 degrees SuperStat

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Engine Part Type: Carburetor Kit
• Returnable: 90-Day

• ✓ Used on model 9 and model 13 Horizontal L-Head engines.
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

0.5

• Engine Part Type: Grommet
• Returnable: 90-Day
• Product Height (in.): 0.5
• Product Width (in.): 0.5

1.5

• Manufacturer Warranty: One year limited warranty
• Engine Part Type: Cap
• Part Type: Engine Part
• Product Depth (in.): 1.5
• Product Width (in.): 1.5
• There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Height (in.): .1
• Returnable: 90-Day
• Engine Part Type: Gasket
• Manufacturer Warranty: One year limited warranty

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Engine Part Type: Magento
• Product Height (in.): 4

• Part Type: Wheel/Tire
• Fits Models: All Magliner brand hand trucks
• Looped shape allows handle to be gripped in different places, providing comfort and convenience: Yes
• Product Height (in.): 5.5
• Returnable: 90-Day
• Product Depth (in.): 33

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Width (in.): 4.75
• Engine Part Type: Bulb
• Part Type: Engine Part