Auto Maintenance Parts Engine Ignition For Sale In Ohio

• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ Weight: Approximately: .13 pounds
• ✓ Use with ATO fuses up to 15 amps
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27272
• ✓ Grooved

• ✓ 2 in. outside diameter
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Resistant to high temperatures
• ✓ Made from high quality material

• ✓ Snap-in design for easy fit
• ✓ Red incandescent indicator lamp LED
• ✓ 3 Amp
• ✓ Chrome construction with red LED

• ✓ Standard flow
• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ The heat motor is 100 percent calibrated to ensure quality and performance

• ✓ New brushes, brush springs and bearings
• ✓ New insulators & hardware
• ✓ This product cannot be shipped to: CA
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ All starter drives remanufactured to meet or exceed OEM standards
• ✓ Armature commutators machined and checked for run-out
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ Weight: Approximately: 8.05 pounds
• ✓ Shipping Dimensions: Approximately 13.25 x 7.25 x 6.63 inches.
• ✓ New bushings & bearings

• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ 180 degrees bottom by-pass
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ With 1 seal

• ✓ New brushes, brush springs and bearings
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ This product cannot be shipped to: CA
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New regulators and diode trios on delco SI type
• ✓ Weight: Approximately: 12.7 pounds

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Weight: Approximately: .09 pounds

• ✓ Resistant to high temperatures
• ✓ Weight: Approximately: .2 pounds
• ✓ This product cannot be shipped to: CA
• ✓ 2.15 in. outside diameter
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Weight: Approximately: .2 pounds
• ✓ Premium thermostat
• ✓ This product cannot be shipped to: CA

• ✓ New regulators and diode trios on delco SI type
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Weight: Approximately: 10.5 pounds
• ✓ New insulators & hardware
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27271

• ✓ 1/4 in. terminal
• ✓ Weight: Approximately: .34 pounds
• ✓ Includes 2 removable keys
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: .8 pounds
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Contains snap ring & snap ring retainer
• ✓ Quality parts, OEM specifications or better
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ Made in the USA

• ✓ This product cannot be shipped to: CA
• ✓ Premium thermostat
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Weight: Approximately: .15 pounds
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.

• ✓ This product cannot be shipped to: CA
• ✓ On-Off SPST
• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Black oval with dot

• ✓ Weight: Approximately: .48 pounds
• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ Bulb is easy to remove for replacement
• ✓ This product cannot be shipped to: CA
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Wide mouth insulated clip for easy hook-up

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ New regulators and diode trios on delco SI type
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All external mounting holes re-threaded
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Weight: Approximately: 10.5 pounds

• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D
• ✓ Weight: Approximately: 4.5 pounds
• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips

• ✓ Fits Quantum, Max and Europa series engines
• ✓ Replaces OE # 397974, 397974S, 5044, 5044B, 692046, 793606, 796577, 07-304, 125-070, 125-660, B1BR74, 6593

• Part Type: Engine Part
• Used With Equipment Type: Walk-Behind Mower
• Fits Brands: Briggs & Stratton
• Product Height (in.): 6.75

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Width (in.): 4
• Engine Part Type: Armature
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Pulley
• Product Height (in.): 2.188
• Part Type: Engine Part

• ✓ Weight: Approximately: .6 pounds
• ✓ Made in the USA
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Comes with all parts needed for quality repairs

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 0.25
• Product Height (in.): 3
• Manufacturer Warranty: 1 Year Limited

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

34 in

• Product Width (in.): 34 in
• Manufacturer Warranty: 1 yr Limited
• Part Type: Engine Part
• Product Height (in.): 34 in