Auto Maintenance Parts Engine Ignition For Sale In Oakland

• ✓ Made from high quality material
• ✓ Grooved
• ✓ Part Number - 27280
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures

• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Part Number - 27174

• ✓ Weight: Approximately: .48 pounds
• ✓ Strain relief protects test lead at base of test light
• ✓ Clear handle & bright bulb for high visibility
• ✓ Tests 6-24 V DC systems
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ Heavy-duty five foot test lead does not kink

• ✓ New insulators & hardware
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Weight: Approximately: 12.5 pounds
• ✓ Rotor slip rings checked for concentricity or replaced with New

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Weight: Approximately: 4.5 pounds
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips
• ✓ This product cannot be shipped to: CA
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ 399 pieces of neatly contained organized within a durable, lightweight, reusable carry-case with handle

• ✓ 1.88 in. outside diameter
• ✓ Resistant to high temperatures
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds

• ✓ Grooved
• ✓ Part Number - 27281
• ✓ This product cannot be shipped to: CA
• ✓ Resistant to high temperatures
• ✓ 2.15 in. outside diameter

• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer
• ✓ Weight: Approximately: .6 pounds
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Quality parts, OEM specifications or better

• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ This product cannot be shipped to: CA
• ✓ 190 degrees
• ✓ Stainless steel
• ✓ Weight: Approximately: .2 pounds

• ✓ 2-3/16 in. x 47/64 in. x 1-11/16 in. x 1-3/16 in.
• ✓ Weight: Approximately: .2 pounds
• ✓ 180 degrees bottom by-pass
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Part Number - 14078

• ✓ Used primarily as a wiring harness protector in 12 volt DC automotive systems
• ✓ 20 amp circuit breaker
• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Returnable: 90-Day
• Product Depth (in.): 4.25
• Product Width (in.): 8
• Engine Part Type: Carburetor

• Fits Brands: Universal
• Engine Type: 4 Cycle
• Industrial grade OHV gasoline engine: Yes
• Engine Make: OEM Branded
• Recommended Oil Type: SAE 10W-30
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 4
• Part Type: Engine Part
• Engine Part Type: Gasket
• Product Width (in.): 0.25

4

• Product Depth (in.): 4
• Part Type: Edger Blade
• Protects shaft from damage and debris: Yes
• Fits Models: STD4422HO, STD67522BS, STP4422HO, STP67522BS and STS67522BS
• Product Width (in.): 4
• Product Height (in.): 1.5

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Weight: Approximately: .04 pounds
• ✓ On-Off SPST

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Width (in.): 0.25
• Product Height (in.): 10
• Manufacturer Warranty: One year limited warranty
• Engine Part Type: Gasket

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

0.25

• Product Width (in.): 0.25
• Product Depth (in.): 0.25
• Engine Part Type: Flywheel Key

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Width (in.): 5.25
• Returnable: 90-Day

• ✓ Button terminals
• ✓ 1/4 in. terminal
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Depth (in.): 2.75
• Part Type: Engine Part
• Product Width (in.): 3.25
• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• Certifications and Listings: EPA Approved
• Product Weight (lb.): 44lb
• Engine Displacement (cc): 212
• Features an electric start system with auto-decompression: Yes
• Used With Equipment Type: Utility
• Part Type: Engine

• ✓ Includes 1 snow blower paddle set
• ✓ Genuine EGO parts ensure compatibility and quality
• ✓ For use with EGO POWER+ snowblower SNT2100

• Manufacturer Warranty: 5 Year Limited Warranty
• Product Width (in.): 7.283 in
• Product Depth (in.): 19.685 in

• ✓ Replaces O.E. 532192870, 192870, 539112057
• ✓ Fits 42 in. and 48 in. decks
• ✓ Triple sealed bearing for maximum life
• ✓ OEM-equivalent fit, quality and performance

• Used With Equipment Type: Riding Mower
• Product Depth (in.): 7

• Part Type: Engine Part
• Manufacturer Warranty: 12 month
• Product Height (in.): 1
• Product Depth (in.): 8
• Fits Brands: Briggs and Stratton
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Fits all Briggs & Stratton non-OHV engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Part Type: Engine Part
• Product Height (in.): 2.5

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 5.625
• Engine Part Type: Spark Plug
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part