Auto Maintenance Parts Engine Ignition For Sale In New Orleans

• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)
• ✓ UV black color
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ Bent tip ensures easy insertion into the tie head

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ This product cannot be shipped to: CA
• ✓ 2.0mm2

• ✓ Includes 2 removable keys
• ✓ 1/4 in. terminal
• ✓ Weight: Approximately: .34 pounds
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Part Number - 45878
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ With jiggle pin
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 180 degrees SuperStat

• ✓ All external mounting holes re-threaded
• ✓ New brushes, brush springs and bearings
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Additional exchange fees may apply

• ✓ Standard 1-1/2 in. black dials
• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.
• ✓ Includes gauge & mounting hardware
• ✓ Only for 12 Volt negative ground systems
• ✓ This product cannot be shipped to: CA
• ✓ Features black bezel with removable black mounting panel

• ✓ This product cannot be shipped to: CA
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Sharp heavy-duty steel probe
• ✓ Strain relief protects test lead at base of test light
• ✓ Bulb is easy to remove for replacement
• ✓ Wide mouth insulated clip for easy hook-up

• ✓ Quality parts, OEM specifications or better
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Help Hotline toll-free number printed on kit
• ✓ Made in the USA
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Contains snap ring & snap ring retainer

• ✓ New terminal hardware
• ✓ Armatures cleaned inspected and polished
• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ Armature commutators machined and checked for run-out
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ All starter drives remanufactured to meet or exceed OEM standards

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ Weight: Approximately: .05 pounds

• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ 1.88 in. outside diameter
• ✓ Part Number - 27272

• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ On-Off SPST
• ✓ Weight: Approximately: .04 pounds
• ✓ Black oval with dot

• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Weight: Approximately: .07 pounds
• ✓ 3 Amp
• ✓ Chrome construction with red LED

• ✓ Made in the USA
• ✓ Help Hotline toll-free number printed on kit
• ✓ This product cannot be shipped to: CA
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer

• Product Width (in.): 8.625
• Manufacturer Warranty: 1 year limited
• Part Type: Engine Part
• Fits models SXDWM82 or SXDWM82K: Yes
• Engine Part Type: Miscellaneous Part
• Product Height (in.): 2.10

• ✓ Over sized ball bearing support
• ✓ Forged high-carbon steel crankshaft

• Engine Make: Subaru
• Fuel Tank Capacity (gallons): 0
• Orientation: Horizontal
• Product Width (in.): 18.75

• ✓ Displacement: 196 ml, bore: 68, stroke: 54
• ✓ Low oil shutoff to safeguard engine from damage
• ✓ Max output of 7 HP/3,600 RPM

• Fits Brands: DuroMax
• Part Type: Engine
• Product Height (in.): 17

88 in

• Manufacturer Warranty: 1 yr Limited
• Returnable: 90-Day
• Product Depth (in.): 88 in
• Part Type: Engine Part
• Product Height (in.): 88 in
• Fits Models: Multiple

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Returnable: 90-Day
• Engine Part Type: Bulb
• Product Width (in.): 4.75
• Product Height (in.): 2.625

• ✓ Crankshaft: 3/4 in. Dia x 2-21/32 in. L, keyway, tapped 3/8-24
• ✓ Dura-bore cast iron cylinder sleeve withstands wear and abuse while providing improved oil control

• Engine Displacement (cc): 306
• Orientation: Horizontal
• Product Depth (in.): 16.75
• Fuel Tank Capacity (gallons): .75

• ✓ Small head screws (2)
• ✓ Needle clean-out tool

• Product Depth (in.): 0 in
• Fits Models: SPX2000
• Manufacturer Warranty: Satisfaction Guaranteed
• Used With Equipment Type: Pressure Washer

• ✓ Fit's many small vertical L-head engines. Refer to the engine model parts manual to ensure the correct Friction Pawl Plate.
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 1.75
• Product Height (in.): 0.5
• Manufacturer Warranty: 1 Year Limited

• ✓ See owner's manual for installation instructions
• ✓ O.D. 2-in. I.D. 1 in.

• Part Type: Bearing
• Product Depth (in.): 1.75
• Manufacturer Warranty: None
• Fits Brands: Swisher

• ✓ Aircraft grade aluminum extrusion alloy is strong and lightweight
• ✓ Bolt-on construction is easy to install
• ✓ Available in 60 in. size (see model # 300978)

• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Used With Equipment Type: Utility
• Product Height (in.): 10

6

• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Engine Part Type: Gasket
• Product Height (in.): 6
• Product Depth (in.): 6
• Part Type: Engine Part
• Returnable: 90-Day

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Seal
• Product Height (in.): .25
• Returnable: 90-Day
• Product Depth (in.): 1.75

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Returnable: 90-Day
• Engine Part Type: Governed Idle Spring
• Manufacturer Warranty: 1 Year Limited
• Product Depth (in.): 1.75