Auto Maintenance Parts Engine Ignition For Sale In Nebraska

• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All external mounting holes re-threaded
• ✓ New brushes, brush springs and bearings
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ This product cannot be shipped to: CA
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ 180 degrees bottom by-pass
• ✓ Part Number - 14228
• ✓ Weight: Approximately: .26 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed

• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Grooved
• ✓ 2 in. outside diameter
• ✓ Weight: Approximately: .2 pounds

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds
• ✓ Grooved
• ✓ 2.15 in. outside diameter

• ✓ With check valve & 1 seal
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .3 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 195 degrees reverse poppet

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Made from high quality material
• ✓ Grooved
• ✓ Resistant to high temperatures
• ✓ 1.88 in. outside diameter

• ✓ This product cannot be shipped to: CA
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Red
• ✓ Provides a quick & reliable crimp-type connection & wire repairs

• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Additional exchange fees may apply
• ✓ Weight: Approximately: 12.5 pounds
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ This product cannot be shipped to: CA

• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ With jiggle pin
• ✓ 180 degrees SuperStat
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Premium thermostat

• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 27271
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures

• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Resistant to high temperatures

• Fits Redmax Trimmer Chainsaws Brush Cutter T207071200: Yes
• Model: 0413USBCF1O
• Brand: SPU

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ New insulators & hardware
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ New brushes, brush springs and bearings

• ✓ Sharp heavy-duty steel probe
• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ Strain relief protects test lead at base of test light
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Tests 6-24 V DC systems
• ✓ Bulb is easy to remove for replacement

• ✓ 6.5 maximum horse power / 196cc displacement
• ✓ Manual recoil start
• ✓ Features low oil shutdown for protection

• Engine Type: 4 Cycle
• Engine Displacement (cc): 196
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Height (in.): 4
• Product Width (in.): 0.25
• Manufacturer Warranty: One year limited warranty

• ✓ Bolt-on construction is easy to install
• ✓ Vertical loop handle offers secure gripping area in both upright positions and when hand truck is tilted back

• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Fits Models: All Magliner brand hand trucks
• Product Height (in.): 10
• Product Depth (in.): 16

0.25

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Part Type: Engine Part
• Manufacturer Warranty: 1 Year Limited
• Product Depth (in.): 0.25
• Product Width (in.): 0.25

• ✓ Weight: Approximately: .05 pounds
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ (2.0mm2) .250 in. tab (6.4mm)

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Engine Part Type: Gasket
• Returnable: 90-Day
• Product Height (in.): 9

• ✓ Fits most cub cadet lawn tractors and RZT mowers with 42 in. decks, 2010 and after
• ✓ Includes (4) 710-126A self-tapping screws and (1) 712-0417A blade nut
• ✓ Also fits cub cadet mini riders with 30 in. decks, 2013 and after

• Product Height (in.): 8
• Used With Equipment Type: Riding Mower
• Fits Models: Cub Cadet lawn tractors and RZT mowers with 42" decks, 2010 & after and 30 in. rider 2013 and after

• ✓ This product cannot be shipped to: CA
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ 5.5mm2

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts as leaks from these parts consume more oil and burns if the engine is running without adequate oil in the crankcase
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Height (in.): 6
• Product Width (in.): 0.25

• Single Cylinder L-Head Manual: Yes
• Product Height (in.): 11
• Part Type: Engine Part
• Engine Part Type: Engine
• Fits Brands: N/A
• Manufacturer Warranty: 1 Year Limited

• Double sided replacement cutting blade: Yes
• Part Type: Edger Blade
• Product Height (in.): 0.2
• Used With Equipment Type: Chippers/Shredder
• Product Width (in.): 1.2
• Manufacturer Warranty: Satisfaction Guaranteed

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Width (in.): 0.25
• Returnable: 90-Day
• Product Depth (in.): 4