Auto Maintenance Parts Engine Ignition For Sale In Nashville Davidson

• ✓ Weight: Approximately: .07 pounds
• ✓ Red incandescent indicator lamp LED
• ✓ Snap-in design for easy fit
• ✓ This product cannot be shipped to: CA

• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ New regulators and diode trios on delco SI type
• ✓ Additional exchange fees may apply
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New brushes, brush springs and bearings

• ✓ Strain relief protects test lead at base of test light
• ✓ Tests 6-24 V DC systems
• ✓ Clear handle & bright bulb for high visibility
• ✓ Sharp heavy-duty steel probe
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.

• ✓ 2 in. outside diameter
• ✓ Made from high quality material
• ✓ Grooved
• ✓ Part Number - 27280
• ✓ Weight: Approximately: .2 pounds

• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ This product cannot be shipped to: CA
• ✓ (2.0mm2) .250 in. tab (6.4mm)

• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ Use with ATO fuses up to 15 amps
• ✓ This product cannot be shipped to: CA

• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ 180 degrees SuperStat
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ With jiggle pin

• ✓ Weight: Approximately: .2 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27271
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• ✓ Weight: Approximately: .15 pounds
• ✓ 180 degrees SuperStat
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Part Number - 45028
• ✓ Premium thermostat

• ✓ Fits Redmax Trimmer Chainsaws Brush Cutter T207071200
• ✓ Ships from the USA!

• Brand: SPU

• ✓ New regulators and diode trios on delco SI type
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded
• ✓ New brushes, brush springs and bearings

• ✓ Compatible with Magliner 2-wheel hand trucks
• ✓ Bolt-on construction is easy to install
• ✓ Hand truck frame and hardware not included

• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Part Type: Wheel/Tire
• Product Height (in.): 8.75

• ✓ 3/4 in. keyway shaft
• ✓ Low oil shutdown engine protection

• Used With Equipment Type: Utility
• Product Weight (lb.): 44lb
• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications
• Certifications and Listings: EPA Approved

• Used With Equipment Type: Walk-Behind Mower
• Engine Part Type: Cap
• Fits Brands: Kohler
• Product Depth (in.): 1
• Product Width (in.): 4
• Manufacturer Warranty: None

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 1.625 in
• Fits Models: Multiple
• Used With Equipment Type: Walk-Behind Mower

• ✓ Recoil only
• ✓ Overhead valve design (OHV) for cooler operation
• ✓ Briggs & Stratton commercial power designs and manufactures premium-grade Vanguard engines ranging from 5.5 to 36.0 gross horsepower, proven on work sites around the world, Vanguard engines are engineered to elevate the reliability standard, which helps people get more done in less time, backed by a global 3-year commercial limited warranty, Vanguard engines are ready to take on any work site challenge
• ✓ Crankshaft: 1 in. Dia x 3-5/32 in. L keyway, tapped: 7/15-20

• Product Width (in.): 0
• Part Type: Engine Part

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ For V-twin vanguard engines (except M61 or M54)

• Product Depth (in.): 4
• Engine Part Type: Gasket
• Returnable: 90-Day
• Product Height (in.): 5

• ✓ 1-year limited warranty
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Returnable: 90-Day
• Product Height (in.): 2.5
• Product Depth (in.): 1.5
• Manufacturer Warranty: One year limited warranty

• ✓ Fits most 5 GHP 133000 horizontal and vertical Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Returnable: 90-Day
• Engine Part Type: Gasket

• Brand/Model Compatibility: Universal
• Single cylinder: Yes
• Product Weight (lb.): 32lb
• Product Depth (in.): 16
• Used With Equipment Type: Utility
• Engine Type: 4 Cycle

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Width (in.): 3
• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• ✓ Acoustically-engineered muffler for quiet operation and excellent tonal quality
• ✓ Lightest engine in its class by 30% for easier maneuverability

• Certifications and Listings: EPA Approved
• Product Width (in.): 12.25 in
• Part Type: Engine
• Product Height (in.): 13 in

• ✓ Check your manual or parts list prior to ordering to ensure proper fit
• ✓ Authentic Agri-Fab replacement parts
• ✓ Fits Agri-Fab base models 45-0456 and 45-0492

• Product Width (in.): 11 in
• Product Height (in.): 3 in
• Returnable: 90-Day

4

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Returnable: 90-Day
• Product Height (in.): 4
• Product Depth (in.): 4
• Part Type: Engine Part

• ✓ Maintenance-free magnetron electronic ignition for quick, dependable starts
• ✓ Gear-driven dura-lube splash lubrication bathes all internal engine parts with oil

• Product Width (in.): 16
• Fuel Tank Capacity (gallons): 1
• Manufacturer Warranty: 2 years limited
• Engine Make: Briggs and Stratton

• Used With Equipment Type: Mower
• Part Type: Engine
• Orientation: Vertical
• Product Width (in.): 17
• Product Height (in.): 16
• 3.2 KW max power: Yes

• ✓ Briggs & Stratton genuine product
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Used With Equipment Type: Walk-Behind Mower
• Hub Required: No hub connection available
• Product Height (in.): 88 in