Auto Maintenance Parts Engine Ignition For Sale In Minnesota

• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ New insulators & hardware
• ✓ Additional exchange fees may apply
• ✓ All external mounting holes re-threaded

• ✓ Weight: Approximately: .09 pounds
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ 5.5mm2
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .4 pounds
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I

• ✓ Weight: Approximately: .18 pounds
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ 195 degrees SuperStat
• ✓ This product cannot be shipped to: CA

• ✓ Part Number - 27271
• ✓ Weight: Approximately: .2 pounds
• ✓ Made from high quality material
• ✓ Resistant to high temperatures

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ 180 degrees SuperStat
• ✓ This product cannot be shipped to: CA
• ✓ With jiggle pin
• ✓ Weight: Approximately: .2 pounds

• ✓ Weight: Approximately: 8.05 pounds
• ✓ Armatures cleaned inspected and polished
• ✓ Additional exchange fees may apply
• ✓ New bushings & bearings
• ✓ Brush leads welded, not soldered
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Part Number - 14228
• ✓ With 1 seal

• ✓ New regulators and diode trios on delco SI type
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Weight: Approximately: 12.7 pounds
• ✓ This product cannot be shipped to: CA
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .29 pounds
• ✓ Simply crimp both ends for a long-lasting, secure connection

• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Bent tip ensures easy insertion into the tie head
• ✓ Weight: Approximately: .9 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals

• ✓ On-Off SPST
• ✓ Rocker switches are an economical & space-saving alternative to multiple switches
• ✓ 1/2 in. round mounting hole
• ✓ This product cannot be shipped to: CA

• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ Weight: Approximately: .13 pounds
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets
• ✓ This product cannot be shipped to: CA

• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 27281
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Made from high quality material
• ✓ Resistant to high temperatures

• Ships from the USA!: Yes
• Brand: SPU
• Model: 0413USBCF1O

• ✓ 2-3/16 in. x 47/64 in. x 1-11/16 in. x 1-3/16 in.
• ✓ Weight: Approximately: .2 pounds
• ✓ 180 degrees bottom by-pass
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ This product cannot be shipped to: CA

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Part Number - 27272
• ✓ Made from high quality material
• ✓ Grooved
• ✓ 1.88 in. outside diameter

• ✓ Additional exchange fees may apply
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New regulators and diode trios on delco SI type
• ✓ New brushes, brush springs and bearings
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ This product cannot be shipped to: CA

• ✓ Replaces 394808
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Starter Motor
• Product Height (in.): 4.376

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 4
• Engine Part Type: Cap
• Returnable: 90-Day
• Product Height (in.): 5

• ✓ Replacement rear wheel for your snapper battery walk mower
• ✓ 10 in. rear wheel

• Used With Equipment Type: Walk-Behind Mower
• Manufacturer Warranty: 1 year limited
• Part Type: Engine Part
• Product Height (in.): 2.05

• ✓ Flow-tek flywheel design
• ✓ Float-feed carburetor
• ✓ Gear shaft: 3/4 in. Dia x 2 in. L, 6:1 gear reduction, CCW rotation, keyway
• ✓ Horizontal engine

• Engine Part Type: Engine
• Returnable: 90-Day

0.5

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Depth (in.): 0.5
• Product Width (in.): 0.5
• Product Height (in.): 1.75

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 3.5
• Part Type: Engine Part
• Engine Part Type: Carburetor
• Returnable: 90-Day

• ✓ Designed to be comfortable for user's wrists
• ✓ Hand truck frame and hardware not included

• Product Height (in.): 6.25
• Used With Equipment Type: Utility
• Part Type: Wheel/Tire
• Returnable: 90-Day

• ✓ Professional series, 8.50 and 8.75, 111000, 11P000, 120000, 121000 Briggs & Stratton engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Height (in.): 9
• Engine Part Type: Gasket
• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty

• Manufacturer Warranty: 12 month
• Part Type: Engine Part
• Used With Equipment Type: Walk-Behind Mower
• Product Height (in.): 1
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Width (in.): 7