Auto Maintenance Parts Engine Ignition For Sale In Massachusetts

• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ New regulators and diode trios on delco SI type
• ✓ Additional exchange fees may apply
• ✓ This product cannot be shipped to: CA

• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New insulators & hardware
• ✓ Additional exchange fees may apply
• ✓ New regulators and diode trios on delco SI type
• ✓ Rotor slip rings checked for concentricity or replaced with New

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Grooved
• ✓ 2 in. outside diameter
• ✓ Part Number - 27280

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Weight: Approximately: 4.5 pounds
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ With 1 seal

• ✓ New bushings & bearings
• ✓ Additional exchange fees may apply
• ✓ Brush leads welded, not soldered
• ✓ All starter drives remanufactured to meet or exceed OEM standards
• ✓ New terminal hardware
• ✓ Shipping Dimensions: Approximately 13.25 x 7.25 x 6.63 inches.

• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Stainless steel
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ The heat motor is 100 percent calibrated to ensure quality and performance

• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ 4 in. cable ties - 18 lbs. tensile strength
• ✓ This product cannot be shipped to: CA
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Weight: Approximately: .9 pounds
• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties

• ✓ Made in the USA
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x .75 inches.
• ✓ Weight: Approximately: .6 pounds

• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Additional exchange fees may apply
• ✓ New insulators & hardware
• ✓ Rotors electronically tested for amperage & insulation quality

• ✓ Part Number - 45209
• ✓ Premium thermostat
• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.
• ✓ Weight: Approximately: .18 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature

• ✓ Part Number - 45028
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .15 pounds
• ✓ Premium thermostat

• ✓ Low oil shutdown engine protection
• ✓ 3/4 in. keyway shaft
• ✓ Automotive grade rods, pistons, ring, crankshaft

• Fits Brands: Universal
• Recommended Oil Type: SAE10W30
• Oil Capacity (oz.): 20.1

• Product Height (in.): 18.75
• Manufacturer Warranty: See limited engine warranty pdf file
• Engine Make: Subaru
• Product Depth (in.): 12.5
• Orientation: Horizontal
• Engine Type: 4 Cycle

• Part Type: Engine Part
• Engine Part Type: Gasket
• Returnable: 90-Day
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Width (in.): 0.25
• Product Depth (in.): 6.75

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Used on models 098902,09D902,09J902,09L902,095502,09T502,09T702,10A902,10D902,10T502,10T702
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Spring
• Returnable: 90-Day

• ✓ Assembled dimension: 20 in. W x 20 in. D x 19 in. H
• ✓ Oversized muffler with safety heat shield for quiet operation
• ✓ Fuel-shutoff switch for easy transport and maintenance

20

• Product Width (in.): 20
• Fuel Tank Capacity (gallons): 1.7
• Product Depth (in.): 20

• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Chrome construction with red LED
• ✓ This product cannot be shipped to: CA
• ✓ Red incandescent indicator lamp LED

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Fits all Briggs & Stratton non-OHV engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Replaces CJ8, RCJ8, J19LM, RJ19LM
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Engine Part Type: Gasket
• Returnable: 90-Day
• Product Width (in.): 0.25

• ✓ Replaces 795426
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Product Height (in.): 2.5
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 2.75

• Part Type: Engine Part
• Returnable: 90-Day
• Fits Models: Universal
• Manufacturer Warranty: None
• Product Width (in.): 4.75
• Used With Equipment Type: Riding Mower,Walk-Behind Mower

• ✓ Replaces OE # 618-04822A
• ✓ Contains 1 spindle

• Returnable: 90-Day
• Fits Brands: Cub Cadet
• Product Depth (in.): 7.25
• Fits Models: Cub Cadet lawn tractors and RZT mowers with 42" decks, 2010 & after and 30 in. rider 2013 and after

• Returnable: 90-Day
• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Product Height (in.): 5
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Product Depth (in.): 4

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Returnable: 90-Day
• Engine Part Type: Carburetor
• Product Width (in.): 4

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 4.75
• Returnable: 90-Day
• Product Height (in.): 1.5

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage
• ✓ Always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Returnable: 90-Day
• Product Depth (in.): 1.25
• Engine Part Type: Ratchet Pawl