Auto Maintenance Parts Engine Ignition For Sale In Maryland

• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ Features black bezel with removable black mounting panel
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Standard 1-1/2 in. black dials
• ✓ Includes gauge & mounting hardware
• ✓ Only for 12 Volt negative ground systems

• ✓ 180 degrees SuperStat
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ Part Number - 45028
• ✓ Premium thermostat
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ (2.0mm2) .250 in. tab (6.4mm)

• ✓ Made from high quality material
• ✓ Part Number - 27280
• ✓ Grooved
• ✓ 2 in. outside diameter
• ✓ Weight: Approximately: .2 pounds

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ 2.0mm2

• ✓ UV black color
• ✓ This product cannot be shipped to: CA
• ✓ Bent tip ensures easy insertion into the tie head
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ Durable 6/6 pure virgin nylon material
• ✓ Weight: Approximately: .9 pounds

• ✓ Part Number - 14228
• ✓ Weight: Approximately: .26 pounds
• ✓ 180 degrees bottom by-pass
• ✓ With 1 seal
• ✓ Quality construction ensures exact fit & a long, trouble-free life

• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Clear handle & bright bulb for high visibility
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Strain relief protects test lead at base of test light
• ✓ Weight: Approximately: .48 pounds

• ✓ 195 degrees reverse poppet
• ✓ With check valve & 1 seal
• ✓ 2-15/64 in. x 53/64 in. x 1-41/64 in.
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ New insulators & hardware
• ✓ New regulators and diode trios on delco SI type
• ✓ Additional exchange fees may apply
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Weight: Approximately: 12.5 pounds

• ✓ Help Hotline toll-free number printed on kit
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Weight: Approximately: .6 pounds
• ✓ Made in the USA
• ✓ Comes with all parts needed for quality repairs
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound

• ✓ New insulators & hardware
• ✓ Additional exchange fees may apply
• ✓ Weight: Approximately: 12.7 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 14078
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 180 degrees bottom by-pass
• ✓ Quality construction ensures exact fit & a long, trouble-free life

4

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Engine Part Type: Carburetor
• Part Type: Engine Part
• Product Depth (in.): 4
• Product Height (in.): 4
• Returnable: 90-Day

• ✓ For 3 - 5 GHP Sprint and Quattro engines
• ✓ Carburetor gasket with diaphragm for walk-behind lawn mowers

• Part Type: Engine Part
• Product Depth (in.): 1.5
• Product Height (in.): 2.5
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): .25
• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Product Height (in.): 9.5

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly

• Part Type: Engine Part
• Product Height (in.): 3.375
• Product Depth (in.): 2.781

• ✓ Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis
• ✓ Product is regulated for use with off-road engines and equipment under EPA 40 CFR part 1060 and must be used on engines/equipment built after 1/1/2012
• ✓ Extend the life of your equipment by doing routine maintenance

• Part Type: Engine Part
• Fits Models: SRM-2620/T/U, PPT-2620/H, PE-2620, SHC-2620
• Product Height (in.): 6.325 in

• ✓ For use on aluminum plastic ring gears only
• ✓ Complies with applicable (EPA) emission regulations

• Product Height (in.): 1.5
• Manufacturer Warranty: One year limited warranty
• Engine Part Type: Pinion Gear
• Product Depth (in.): 4.8

30 in

• Returnable: 90-Day
• Briggs & Stratton genuine product: Yes
• Fits Models: Multiple
• Manufacturer Warranty: 1 yr Limited
• Product Height (in.): 30 in
• Product Width (in.): 30 in

• ✓ Genuine factory replacement part
• ✓ See owner's manual for assembly instructions

• Used With Equipment Type: String Trimmer
• Part Type: Engine Part
• Returnable: 90-Day
• Fits Models: STD4422HO, STD67522BS, STP4422HO, STP67522BS, STS67522BS

• Part Type: Spindle
• Product Depth (in.): 7
• Returnable: 90-Day
• Fits Models: 42 in and 48 in Decks
• Triple sealed bearing for maximum life: Yes
• Product Height (in.): 9.25

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Part Type: Engine Part
• Returnable: 90-Day
• Product Depth (in.): .75
• Engine Part Type: Clamp
• Manufacturer Warranty: One year limited warranty

• Product Width (in.): 2
• Product Depth (in.): 3
• Manufacturer Warranty: One year limited warranty
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Engine Part Type: Carburetor
• Part Type: Engine Part

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Manufacturer Warranty: 1 Year Limited
• Returnable: 90-Day
• Product Depth (in.): .5
• Product Width (in.): 8.25

• ✓ Low oil shutdown system significantly reduces the chance of engine damage due to insufficient lubrication
• ✓ Overhead valve design (OHV) for cooler operation
• ✓ Horizontal engine
• ✓ Transport guard fuel and ignition switch protects oil and fuel dilution during transport

• Returnable: 90-Day
• Manufacturer Warranty: Consumer Use: 3 Years / Commercial Use: 3 Years