Auto Maintenance Parts Engine Ignition For Sale In Louisville Jefferson County

• ✓ 180 degrees bottom by-pass
• ✓ Weight: Approximately: .2 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Part Number - 14078
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ 2.15 in. outside diameter
• ✓ Part Number - 27281
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Weight: Approximately: 4.5 pounds
• ✓ 399 pieces of neatly contained organized within a durable, lightweight, reusable carry-case with handle
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D

• ✓ Resistant to high temperatures
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Made from high quality material
• ✓ 1.88 in. outside diameter

• ✓ New regulators and diode trios on delco SI type
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New brushes, brush springs and bearings
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ New insulators & hardware

• ✓ Part Number - 27280
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Resistant to high temperatures
• ✓ 2 in. outside diameter

• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ This product cannot be shipped to: CA
• ✓ Premium thermostat
• ✓ Part Number - 45028
• ✓ 180 degrees SuperStat

• ✓ Weight: Approximately: .29 pounds
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Provides a quick & reliable crimp-type connection & wire repairs

• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 195 degrees reverse poppet
• ✓ 2-15/64 in. x 53/64 in. x 1-41/64 in.
• ✓ This product cannot be shipped to: CA

• ✓ This product cannot be shipped to: CA
• ✓ Standard flow
• ✓ Stainless steel
• ✓ Weight: Approximately: .2 pounds
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston

• ✓ 3 Amp
• ✓ This product cannot be shipped to: CA
• ✓ Chrome construction with red LED
• ✓ Red incandescent indicator lamp LED

• ✓ Only for 12 Volt negative ground systems
• ✓ Includes gauge & mounting hardware
• ✓ Features black bezel with removable black mounting panel
• ✓ This product cannot be shipped to: CA
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.

• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Contains snap ring & snap ring retainer
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .8 pounds
• ✓ Quality parts, OEM specifications or better

• ✓ Fits Redmax Trimmer Chainsaws Brush Cutter T207071200
• ✓ Ships from the USA!

• Brand: SPU

• ✓ New regulators and diode trios on delco SI type
• ✓ All external mounting holes re-threaded
• ✓ New insulators & hardware
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Additional exchange fees may apply
• ✓ Rotor slip rings checked for concentricity or replaced with New

• ✓ Weight: Approximately: .05 pounds
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Provides your trimmer with 8 cutting lines
• ✓ Adjusts the cutting height of your trimmer

7

• Product Depth (in.): 7
• Used With Equipment Type: String Trimmer
• Product Width (in.): 7
• Manufacturer Warranty: None

• ✓ Compatible with the SPX3000 electric pressure washer
• ✓ Includes large screws (4), small screws (2), trigger gun holder, hose holder, spray wand protector, needle clean-out tool, detergent selection dial

• Part Type: Tune-Up Kit
• Fits Models: SPX3000
• Product Width (in.): 5 in
• Product Height (in.): 6 in

• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA
• ✓ With 1 seal
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed

• ✓ Consult owner's manual for installation instructions
• ✓ Fits most tractors with 1/4 in. ID fuel line
• ✓ Low permeation fuel line
• ✓ Includes fuel line, clamps and shut-off valve

• Product Depth (in.): 1
• Product Height (in.): 7

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Height (in.): 3.375
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 2.781

• Fits Brands: Briggs and Stratton
• Dimensions: 7 in. L x 7 in. W x 7-3/4 in. H: Yes
• Engine Part Type: Miscellaneous Part
• Hub Required: No hub connection available
• Manufacturer Warranty: 1 yr Limited
• Part Type: Engine Part

• ✓ Overall size is 13 in. L x 8 in. W
• ✓ Hand truck frame not included
• ✓ Main pocket is 12 in. L x 8 in. W x 2 in. D with 1 self-adhesive strap

• Product Depth (in.): 15.5
• Fits Brands: Magliner
• Fits Models: All Magliner brand hand trucks

• ✓ Assembled dimension: 20 in. W x 19 in. D x 19 in. H
• ✓ Auto decompression for easy starting

• Part Type: Engine
• Manufacturer Warranty: 3 Year Warranty
• Product Height (in.): 20
• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Engine Part Type: Carburetor
• Manufacturer Warranty: One year limited warranty

• ✓ For use on: ECHO trimmers, brushcutters, pruners, edgers, tillers, hedge trimmers, chainsaws, bed redefiners, blowers and power attachment series (PAS)
• ✓ Ideal for commercial landscapers and homeowners
• ✓ Product may vary by store

• Manufacturer Warranty: 5 year consumer, 2 year commercial
• Product Depth (in.): 1.397 in
• Engine Part Type: Bulb

1.625 in

• Fits Models: Multiple
• Product Depth (in.): 1.625 in
• Product Height (in.): 1.625 in
• Manufacturer Warranty: 1 yr Limited
• Engine Part Type: Miscellaneous Part
• Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes