Auto Maintenance Parts Engine Ignition For Sale In Indianapolis

• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Weight: Approximately: 10.5 pounds
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ New brushes, brush springs and bearings
• ✓ All external mounting holes re-threaded

• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ Weight: Approximately: .13 pounds
• ✓ Use with ATO fuses up to 15 amps
• ✓ This product cannot be shipped to: CA

• ✓ This product cannot be shipped to: CA
• ✓ Red incandescent indicator lamp LED
• ✓ Weight: Approximately: .07 pounds
• ✓ Snap-in design for easy fit

• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ With jiggle pin
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 45878

• ✓ Blue
• ✓ Weight: Approximately: .03 pounds
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy

• ✓ This product cannot be shipped to: CA
• ✓ Grooved
• ✓ 1.88 in. outside diameter
• ✓ Part Number - 27272
• ✓ Made from high quality material

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Made from high quality material
• ✓ Resistant to high temperatures
• ✓ Part Number - 27271

• ✓ 180 degrees SuperStat
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Part Number - 45028
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.

• ✓ 2 in. outside diameter
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Weight: Approximately: .2 pounds
• ✓ This product cannot be shipped to: CA

• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ New regulators and diode trios on delco SI type
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New insulators & hardware

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Weight: Approximately: 4.5 pounds
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips
• ✓ This product cannot be shipped to: CA
• ✓ Includes multi-tool that strips & cuts wire, crimps ignition & insulated terminals & cuts & rethreads mild steel bolts

• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.
• ✓ Includes 12 Volt internal backlighting
• ✓ Includes Mechanical Oil/Water Temperature, Electrical Voltmeter & Mechanical Oil Pressure gauges
• ✓ Popular mini gauges packaged conveniently for easy installation
• ✓ Features black bezel with removable black mounting panel
• ✓ Standard 1-1/2 in. black dials

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

3.25

• Product Width (in.): 3.25
• Part Type: Engine Part
• Manufacturer Warranty: 1 Year Limited
• Product Depth (in.): 3.25

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Product Height (in.): 7.25
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 3.25

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Replaces 806039 and 805028

• Product Depth (in.): 4
• Engine Part Type: Gasket
• Returnable: 90-Day

• Dual-sealing air cleaner for improved debris resistance and longer life: Yes
• Returnable: 90-Day
• Fuel Tank Capacity (gallons): .4
• Used With Equipment Type: Walk-Behind Mower
• Manufacturer Warranty: 2 year limited
• Engine Make: Briggs and Stratton

2 in

• Product Height (in.): 2 in
• Used With Equipment Type: Cultivator/ Tiller
• Product Width (in.): 2 in
• Returnable: 90-Day
• Fits Models: TJ600E
• Part Type: Tune-Up Kit

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Returnable: 90-Day
• Engine Part Type: Seal
• Product Height (in.): .25

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Returnable: 90-Day
• Product Height (in.): 4
• Engine Part Type: Carburetor

• ✓ Fits most Toro riding mowers and snowblowers model year 1990 and newer
• ✓ Contains 1 key

• Part Type: Engine Part
• Product Depth (in.): .400
• Fits Brands: Toro
• Fits Models: Toro riding mowers and snowblowers model year 1990 and newer

• ✓ For replacing transmission cable
• ✓ See owner's manual for assembly instructions
• ✓ Genuine factory replacement part

• Part Type: Engine Part
• Manufacturer Warranty: 30 day
• Used With Equipment Type: Brush Cutter

• ✓ Used on a variety of horizontal and vertical engine carburetors. Check the engine model parts manual for the correct part #.
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Manufacturer Warranty: 1 Year Limited
• Product Width (in.): 1
• Returnable: 90-Day
• Product Height (in.): 0.5

• ✓ Durable design runs quietly and provides smooth operation
• ✓ Adjustable throttle is easy to access
• ✓ 1.7-gallon fuel tank capacity offers long run times
• ✓ Assembled dimension: 19 in. W x 19 in. D x 20 in. H

• Certifications and Listings: 1-UL Listed
• Orientation: Horizontal

• Fuel Tank Capacity (gallons): 0
• Oil Capacity (oz.): 64
• Product Depth (in.): 24
• Orientation: Vertical
• Certifications and Listings: CARB Compliant,EPA Approved
• Engine Displacement (cc): 810

• ✓ 77 x 66 mm bore/stroke. 29.5 ft./lbs. max torque
• ✓ 1-1/8 in. Dia x 3 in. length tapered output shaft

• Fuel Tank Capacity (gallons): 1.8
• Recommended Oil Type: SAE 10W-30
• Engine Make: OEM Branded
• Manufacturer Warranty: 3 Year Limited

• Brand/Model Compatibility: Universal
• Used With Equipment Type: Log Splitter,Pressure Washer
• Horizontal shaft: Yes
• Product Depth (in.): 15
• Part Type: Engine
• Oil Capacity (oz.): 16

• ✓ Fits most 80200, 135200, 130200, 112200 series Briggs & Stratton engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Part Type: Engine Part
• Returnable: 90-Day
• Engine Part Type: Gasket