Auto Maintenance Parts Engine Ignition For Sale In Indiana

• ✓ Help Hotline toll-free number printed on kit
• ✓ Made in the USA
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Weight: Approximately: .8 pounds
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ Quality parts, OEM specifications or better

• ✓ Grooved
• ✓ This product cannot be shipped to: CA
• ✓ 1.88 in. outside diameter
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures

• ✓ Armatures cleaned inspected and polished
• ✓ New brushes & brush springs
• ✓ New terminal hardware
• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ This product cannot be shipped to: CA
• ✓ All starter drives remanufactured to meet or exceed OEM standards

• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 14078
• ✓ 180 degrees bottom by-pass
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed

• ✓ Shipping Dimensions: Approximately 8 x 7 x 3.6 inches.
• ✓ Standard 1-1/2 in. black dials
• ✓ Includes gauge & mounting hardware
• ✓ Includes 72 in. high temperature nylon tubing with 1/8 in. & 1/4 in. NPT thread fittings
• ✓ This product cannot be shipped to: CA
• ✓ Popular mini gauges packaged conveniently for easy installation

• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.
• ✓ With jiggle pin
• ✓ Premium thermostat
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Weight: Approximately: .18 pounds

• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Weight: Approximately: .03 pounds
• ✓ 2.0mm2

• ✓ New regulators and diode trios on delco SI type
• ✓ New insulators & hardware
• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Additional exchange fees may apply
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: .26 pounds
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ 180 degrees bottom by-pass

• ✓ Weight: Approximately: .1 pounds
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures
• ✓ Made from high quality material

• ✓ Quality parts, OEM specifications or better
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Made in the USA
• ✓ Weight: Approximately: .6 pounds
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French

• ✓ 195 degrees reverse poppet
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ 2-15/64 in. x 53/64 in. x 1-41/64 in.
• ✓ With check valve & 1 seal
• ✓ This product cannot be shipped to: CA

• ✓ Weight: Approximately: 10.5 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New insulators & hardware
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ All external mounting holes re-threaded

• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ 2.15 in. outside diameter
• ✓ Grooved
• ✓ Weight: Approximately: .2 pounds

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Starter Drive
• Product Depth (in.): 2.75
• Product Height (in.): 2.5
• Returnable: 90-Day

• ✓ Use to replace lost or damaged fuel caps with ECHO outdoor equipment except chain saws
• ✓ For use on 2-cycle engines
• ✓ 5 Year Consumer, 2 Year Commercial manufacturer warranty
• ✓ Product may vary by store

• Product Width (in.): 2.875 in
• Product Depth (in.): 1.397 in

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 0.25
• Product Depth (in.): 6
• Returnable: 90-Day

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Product Depth (in.): 1.5

• ✓ This product cannot be shipped to: CA
• ✓ Standard flow
• ✓ Weight: Approximately: .2 pounds
• ✓ Provides a precise response to your vehicle's cooling system needs
• ✓ 190 degrees

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts as leaks from these parts consume more oil and burns if the engine is running without adequate oil in the crankcase
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 4
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Contains 2 ft. of 1/4 in. I.D. x 11/32 in. O.D. fuel line
• ✓ Fuel and chemical resistant

• Product Width (in.): 4.75
• Returnable: 90-Day
• Part Type: Engine Part
• Product Depth (in.): 1.25

• Fuel Tank Capacity (gallons): 1.7
• Manufacturer Warranty: 3 Year Warranty
• Product Weight (lb.): 60lb
• Product Height (in.): 18
• 9 HP horizontal shaft design for heavy duty/industrial application: Yes
• Fits Models: Universal

• Product Width (in.): 0.25
• Engine Part Type: Seal
• Product Height (in.): 5
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes

• ✓ Universal mounting bolt pattern and 1 in. horizontal output shaft
• ✓ Fuel-shutoff switch for easy transport and maintenance
• ✓ Assembled dimension: 18 in. W x 19 in. D x 20 in. H
• ✓ Oversized muffler with safety heat shield for quiet operation

• Part Type: Engine
• Product Width (in.): 18

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ This product cannot be shipped to: CA
• ✓ Premium thermostat

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

2.25

• Product Depth (in.): 2.25
• Product Width (in.): 2.25
• Returnable: 90-Day

• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Product Depth (in.): 6.5
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 4.25
• Part Type: Engine Part
• Engine Part Type: Control Bracket