Auto Maintenance Parts Engine Ignition For Sale In Idaho

• ✓ Weight: Approximately: .03 pounds
• ✓ Blue
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ This product cannot be shipped to: CA

• ✓ New terminal hardware
• ✓ Armatures cleaned inspected and polished
• ✓ New brushes & brush springs
• ✓ New bushings & bearings
• ✓ Brush leads welded, not soldered
• ✓ All starter drives remanufactured to meet or exceed OEM standards

• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ Weight: Approximately: 4.5 pounds
• ✓ 399 pieces of neatly contained organized within a durable, lightweight, reusable carry-case with handle
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D

• ✓ Weight: Approximately: .13 pounds
• ✓ Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
• ✓ Available in 5 pole unit with removable clear protective cover
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets

• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ This product cannot be shipped to: CA

• ✓ This product cannot be shipped to: CA
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Comes with all parts needed for quality repairs
• ✓ Contains snap ring & snap ring retainer
• ✓ Help Hotline toll-free number printed on kit
• ✓ Quality parts, OEM specifications or better

• ✓ 180 degrees bottom by-pass
• ✓ 2-3/16 in. x 47/64 in. x 1-11/16 in. x 1-3/16 in.
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ This product cannot be shipped to: CA
• ✓ Quality construction ensures exact fit & a long, trouble-free life

• ✓ On-Off SPST
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Black oval with dot

• ✓ Weight: Approximately: .4 pounds
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ This product cannot be shipped to: CA
• ✓ 20 amp circuit breaker

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures
• ✓ 2.15 in. outside diameter
• ✓ Weight: Approximately: .2 pounds
• ✓ Grooved

• ✓ Weight: Approximately: .29 pounds
• ✓ Red
• ✓ This product cannot be shipped to: CA
• ✓ Provides a quick & reliable crimp-type connection & wire repairs

• ✓ Weight: Approximately: .07 pounds
• ✓ 3 Amp
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.
• ✓ Chrome construction with red LED

• ✓ Weight: Approximately: .15 pounds
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Premium thermostat
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 180 degrees SuperStat

• Fits Models: SPX3000
• Product Width (in.): 5 in
• Manufacturer Warranty: Satisfaction Guaranteed
• Product Depth (in.): 8 in
• Compatible with the SPX3000 electric pressure washer: Yes
• Fits Brands: Sun Joe

• ✓ Includes fuel line, clamps and shut-off valve
• ✓ Consult owner's manual for installation instructions

• Manufacturer Warranty: NOne
• Product Height (in.): 7
• Returnable: 90-Day
• Product Depth (in.): 1

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 1
• Product Height (in.): 2.5
• Part Type: Engine Part
• Returnable: 90-Day

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Depth (in.): 2
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Compatible with Magliner 2-wheel hand trucks
• ✓ Heel is recessed to allow for cylindrical items to nest within a curved hand truck frame
• ✓ Resistant to corrosion
• ✓ Reinforced material in high-stress areas prevents breakage under heavy loads

• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Returnable: 90-Day

• ✓ Cast-iron cylinder liners
• ✓ Assembled dimension: 18.75 in. W x 12.5 in. D x 18.75 in. H
• ✓ Forged high-carbon steel crankshaft

• Product Depth (in.): 12.5
• Orientation: Horizontal
• Engine Type: 4 Cycle

0.25

• Engine Part Type: Governed Idle Spring
• Product Height (in.): 0.25
• Part Type: Engine Part
• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Product Width (in.): 0.25
• Product Depth (in.): 1.75

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Replaces 695423 and 699878

• Product Height (in.): 9.475
• Part Type: Engine Part
• Engine Part Type: Fuel
• Manufacturer Warranty: One year limited warranty

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Engine Part Type: Carburetor Kit
• Product Height (in.): 1.5
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part

• ✓ Replaces part# 68838 and 805259
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Returnable: 90-Day
• Product Height (in.): 4.375
• Engine Part Type: Starter Motor

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

3

• Product Height (in.): 3
• Product Depth (in.): 3
• Product Width (in.): 0.25

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Part Type: Engine Part
• Returnable: 90-Day
• Engine Part Type: Gasket
• Manufacturer Warranty: One year limited warranty

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Replaces 806039 and 805028

• Engine Part Type: Gasket
• Product Height (in.): 5
• Manufacturer Warranty: One year limited warranty

• Fits Brands: Magliner
• Used With Equipment Type: Utility
• Bolt-on construction is easy to install: Yes
• Returnable: 90-Day
• Product Height (in.): 7.25
• Product Width (in.): 11.5