Auto Maintenance Parts Engine Ignition For Sale In Hamilton

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Weight: Approximately: .09 pounds

• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Weight: Approximately: .18 pounds
• ✓ 195 degrees SuperStat
• ✓ Part Number - 45209
• ✓ This product cannot be shipped to: CA
• ✓ With jiggle pin

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 180 degrees SuperStat
• ✓ Weight: Approximately: .15 pounds
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ This product cannot be shipped to: CA

• ✓ Snap-in design for easy fit
• ✓ Chrome construction with red LED
• ✓ Weight: Approximately: .07 pounds
• ✓ This product cannot be shipped to: CA

• ✓ On-Off SPST
• ✓ Shipping Dimensions: Approximately 5 x 3 x 1.25 inches.
• ✓ Rocker switches are an economical & space-saving alternative to multiple switches
• ✓ 1/2 in. round mounting hole

• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ Additional exchange fees may apply
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.

• ✓ Quality parts, OEM specifications or better
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x .75 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Comes with all parts needed for quality repairs

• ✓ This product cannot be shipped to: CA
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ With 1 seal
• ✓ Weight: Approximately: .26 pounds
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.

• ✓ Bulb is easy to remove for replacement
• ✓ Clear handle & bright bulb for high visibility
• ✓ This product cannot be shipped to: CA
• ✓ Sharp heavy-duty steel probe
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Weight: Approximately: .48 pounds

• ✓ Contains snap ring & snap ring retainer
• ✓ This product cannot be shipped to: CA
• ✓ Made in the USA
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ Comes with all parts needed for quality repairs

• ✓ Part Number - 27272
• ✓ Resistant to high temperatures
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Grooved
• ✓ This product cannot be shipped to: CA

• ✓ Stud type low voltage circuit breakers with mounting bracket
• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ 20 amp circuit breaker

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ Weight: Approximately: .03 pounds
• ✓ Blue

• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)
• ✓ 4 in. cable ties - 18 lbs. tensile strength
• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Bent tip ensures easy insertion into the tie head
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals

• ✓ Resistant to high temperatures
• ✓ Grooved
• ✓ 2 in. outside diameter
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Weight: Approximately: .2 pounds

• ✓ The heat motor is 100 percent calibrated to ensure quality and performance
• ✓ Stainless steel
• ✓ Standard flow
• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.
• ✓ Provides a precise response to your vehicle's cooling system needs

• ✓ New brushes, brush springs and bearings
• ✓ All external mounting holes re-threaded
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New insulators & hardware
• ✓ Weight: Approximately: 12.5 pounds

• ✓ Weight: Approximately: .3 pounds
• ✓ With check valve & 1 seal
• ✓ This product cannot be shipped to: CA
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ Fits most 13, 14, 15 and 15.5 GHP intek OHV vertical 210000, 212000, 214000, 215000 model Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Height (in.): 5
• Part Type: Engine Part
• Product Width (in.): 0.25

• ✓ Briggs & Stratton genuine product
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Manufacturer Warranty: 1 yr Limited
• Returnable: 90-Day
• Engine Part Type: Miscellaneous Part
• Fits Models: Multiple

• ✓ Includes jumper wire
• ✓ Replaces OEM-725-1426, 925-1426/725-1426, and 925-04439/725-04439

• Product Height (in.): 6.63
• Part Type: Engine Part
• Product Depth (in.): 2.50
• Engine Part Type: Solenoid

• ✓ Part Number - 27281
• ✓ 2.15 in. outside diameter
• ✓ Weight: Approximately: .2 pounds
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA

6 in

• Product Height (in.): 6 in
• Used With Equipment Type: Walk-Behind Mower
• Fits Brands: Briggs and Stratton
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Product Width (in.): 6 in
• Part Type: Engine Part

• ✓ Fits Subaru models EH63, EH64, EH65 & EH72
• ✓ Assembled dimension: 12 in. W x 20 in. D x 12 in. H

• Product Height (in.): 12
• Returnable: 30-Day
• Product Weight (lb.): 16lb
• Part Type: Engine

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Gasket
• Product Height (in.): .1
• Part Type: Engine Part

• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 4.75
• Product Depth (in.): 1.5
• Part Type: Engine Part
• There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton: Yes

• Fits Models: Sprint, Quattro or Quantum Engines
• Engine Part Type: Bulb
• Part Type: Engine Part
• Fits Brands: Briggs & Stratton
• Product Height (in.): 6.63
• Consult owner's manual for installation instructions: Yes