Auto Maintenance Parts Engine Ignition For Sale In Fort Worth

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New regulators and diode trios on delco SI type
• ✓ Rotor slip rings checked for concentricity or replaced with New

• ✓ Button terminals
• ✓ This product cannot be shipped to: CA
• ✓ 1/4 in. terminal
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.

• ✓ Quality parts, OEM specifications or better
• ✓ This product cannot be shipped to: CA
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Comes with all parts needed for quality repairs
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.

• ✓ This product cannot be shipped to: CA
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ With 1 seal
• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Weight: Approximately: .26 pounds

• ✓ Part Number - 45028
• ✓ Weight: Approximately: .15 pounds
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ This product cannot be shipped to: CA

• ✓ UV black color
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Durable 6/6 pure virgin nylon material
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ This product cannot be shipped to: CA
• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength

• ✓ 3 Amp
• ✓ Red incandescent indicator lamp LED
• ✓ Snap-in design for easy fit
• ✓ Shipping Dimensions: Approximately 4.75 x 2.75 x 1 inches.

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ Weight: Approximately: .29 pounds
• ✓ Provides a quick & reliable crimp-type connection & wire repairs

• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ All external mounting holes re-threaded
• ✓ New regulators and diode trios on delco SI type
• ✓ New brushes, brush springs and bearings
• ✓ New insulators & hardware
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new

• ✓ Provides a precise response to your vehicle's cooling system needs
• ✓ Powered by a precisely formulated thermal-responsive wax pellet in a heat conducting copper cup equipped with a stainless steel piston
• ✓ Weight: Approximately: .2 pounds
• ✓ 190 degrees
• ✓ The heat motor is 100 percent calibrated to ensure quality and performance

• ✓ Shipping Dimensions: Approximately 4 x 2 x 1.63 inches.
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ Weight: Approximately: .4 pounds
• ✓ This product cannot be shipped to: CA

• ✓ This product cannot be shipped to: CA
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer
• ✓ Made in the USA
• ✓ Help Hotline toll-free number printed on kit
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Quality parts, OEM specifications or better

• ✓ (2.0mm2) .250 in. tab (6.4mm)
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy

• ✓ 270cc for reliable power
• ✓ Fuel-shutoff switch for easy transport and maintenance
• ✓ Durable design runs quietly and provides smooth operation
• ✓ 1 in. horizontal keyway and 1 in. threaded output shaft
• ✓ Oversized muffler with safety heat shield for quiet operation

• Brand/Model Compatibility: Universal

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Carburetor
• Product Height (in.): 5
• Product Width (in.): 8
• Part Type: Engine Part

• ✓ Quality tested performance
• ✓ Use on 12-Volt starters

• Product Height (in.): 3.75
• Product Depth (in.): 4.75
• Part Type: Engine Part
• Engine Part Type: Solenoid

• Engine Part Type: Starter
• Manufacturer Warranty: One year limited warranty
• Replaces 294303 and 555226: Yes
• Product Depth (in.): 8.25
• Returnable: 90-Day
• Product Width (in.): 2.875

• ✓ 24 MHP V-twin OHV design for heavy duty/industrial application
• ✓ Fuel shut-off switch for easy transport and maintenance

• Engine Type: 4 Cycle
• Recommended Oil Type: 15W-50, 20W-50
• Product Height (in.): 18
• Product Weight (lb.): 103lb

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specification and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Carburetor Kit
• Product Depth (in.): .25
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 8

1.5

• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts: Yes
• Product Depth (in.): 1.5
• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 1.5
• Product Height (in.): 1

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Product Width (in.): 0.25
• Product Depth (in.): 4
• Part Type: Engine Part
• Returnable: 90-Day

• ✓ Features low oil shutdown for added protection
• ✓ Offered with multiple output shaft configurations
• ✓ Threaded output shaft available

• Returnable: 90-Day
• Fits Models: Multiple
• Engine Type: 4 Cycle

• ✓ Maintenance-free magnetron electronic ignition for quick, dependable starts
• ✓ Dura lube gear-driven splash lubrication continuously applies oil to all internal parts

• Product Depth (in.): 24
• Engine Displacement (cc): 14.50
• Part Type: Engine
• Manufacturer Warranty: 1 year limited

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Replaces 795426
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 2.75
• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 5.25
• Part Type: Engine Part
• Product Height (in.): 4.25

• Manufacturer Warranty: None
• Product Height (in.): 1
• Used With Equipment Type: Walk-Behind Mower
• Returnable: 90-Day
• CARB compliant cap: Yes
• Product Width (in.): 4