Auto Maintenance Parts Engine Ignition For Sale In Charlotte

• ✓ All starter drives remanufactured to meet or exceed OEM standards
• ✓ Armatures cleaned inspected and polished
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ New brushes & brush springs
• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ Armature commutators machined and checked for run-out

• ✓ 6 in. & 8 in. cable ties - 45 lbs. tensile strength
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Bent tip ensures easy insertion into the tie head
• ✓ Durable 6/6 pure virgin nylon material
• ✓ Operates at 100 percent capacity up to 65 degrees C (149 degrees F) & at 50 percent capacity from 65 degrees C to 185 degrees C (149-365 degrees F)

• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ This product cannot be shipped to: CA
• ✓ Quality parts, OEM specifications or better
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Contains snap ring & snap ring retainer
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French

• ✓ This product cannot be shipped to: CA
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 195 degrees SuperStat
• ✓ Part Number - 45209
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ 1-13/16 in. x 3/4 in. x 61/64 in.

• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ Weight: Approximately: .29 pounds
• ✓ Shipping Dimensions: Approximately 4.5 x 3 x 1.5 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Made from high quality material
• ✓ This product cannot be shipped to: CA
• ✓ 1.88 in. outside diameter
• ✓ Part Number - 27272
• ✓ Resistant to high temperatures

• ✓ 5.5mm2
• ✓ Simply crimp both ends for a long-lasting, secure connection
• ✓ Weight: Approximately: .09 pounds
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Provides a precise response to your vehicle's cooling system needs
• ✓ Stainless steel
• ✓ 190 degrees
• ✓ Weight: Approximately: .2 pounds
• ✓ Shipping Dimensions: Approximately 2.63 x 2.63 x 2.63 inches.

• ✓ Weight: Approximately: 10.5 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Additional exchange fees may apply
• ✓ New brushes, brush springs and bearings
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ All external mounting holes re-threaded

• ✓ Part Number - 27271
• ✓ Made from high quality material
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Weight: Approximately: .2 pounds

• ✓ Compatible with Magliner 2-wheel hand trucks
• ✓ 1 additional pocket is 11-1/2 in. W x 12 in. D

• Product Width (in.): 12
• Fits Brands: Magliner
• Returnable: 90-Day
• Part Type: Wheel/Tire

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Cap
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ For most 13-15 GHP OHV 212000 and 215000 vertical Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Gasket
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Height (in.): 4.25
• Part Type: Engine Part
• Returnable: 90-Day
• Product Depth (in.): 0.25

• ✓ Vented with liner
• ✓ 2-1/8 in. diameter
• ✓ Replaces lost or damaged gas caps

• Product Height (in.): 1.5
• Product Width (in.): 4.75
• Engine Part Type: Cap

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ 1-year limited warranty
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Carburetor
• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty

• ✓ Grooved
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 27281
• ✓ Made from high quality material

• ✓ 12-Volt starting systems
• ✓ Non-grounded

• Engine Part Type: Solenoid
• Returnable: 90-Day
• Product Depth (in.): 2.5
• Part Type: Engine Part

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Fits most 331000, 31M000, 31F000 Briggs & Stratton engines

• Product Depth (in.): 3
• Returnable: 90-Day
• Engine Part Type: Gasket
• Manufacturer Warranty: One year limited warranty

0

• ✓ Premium sintered iron cylinder sleeves
• ✓ Dual-clean premium air filter
• ✓ Commercial quality components

• Fits Brands: multiple
• Product Height (in.): 0
• Product Depth (in.): 0

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Fit's many small vertical L-head engines. Refer to the engine model parts manual to ensure the correct Friction Pawl Plate.

• Manufacturer Warranty: 1 Year Limited
• Product Width (in.): 1.75
• Product Height (in.): 0.5
• Engine Part Type: Pawl-Plate

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Replaces 493960 and 494768

• Part Type: Engine Part
• Product Height (in.): 12
• Product Depth (in.): 13
• Engine Part Type: Fuel

• ✓ For use with select Swisher string trimmers
• ✓ Genuine factory replacement part

• Part Type: Engine Part
• Manufacturer Warranty: None
• Returnable: 90-Day
• Fits Models: STD4422HO, STD67522BS, STP4422HO, STP67522BS, STS67522BS

• Used With Equipment Type: Riding Mower
• Product Height (in.): 16
• Engine Make: Briggs and Stratton
• Brand/Model Compatibility: BRiggs
• Fuel Tank Capacity (gallons): 1
• Product Weight (lb.): 75lb

• ✓ Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB
• ✓ Extend the life of your equipment by doing routine maintenance
• ✓ For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS)
• ✓ Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis

• Part Type: Engine Part
• Used With Equipment Type: Trimmer

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Depth (in.): 20.25
• Product Width (in.): 1
• Manufacturer Warranty: 1 Year Limited
• Part Type: Engine Part

• ✓ Quality tested for performance and value
• ✓ Complies with applicable (EPA) emission regulations
• ✓ 1-year parts warranty

• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 4.75