Auto Maintenance Parts Engine Ignition For Sale In Austin

• ✓ Armature commutators machined and checked for run-out
• ✓ Weight: Approximately: 8.05 pounds
• ✓ Brush leads welded, not soldered
• ✓ All solenoides remanufactured to meet or exceed OEM standards
• ✓ All starter drives remanufactured to meet or exceed OEM standards
• ✓ This product cannot be shipped to: CA

• ✓ Includes multi-tool that strips & cuts wire, crimps ignition & insulated terminals & cuts & rethreads mild steel bolts
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips
• ✓ 399 pieces of neatly contained organized within a durable, lightweight, reusable carry-case with handle
• ✓ 10-3/4 in. W x 7-1/2 in. H x 3-1/4 in. D
• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure

• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures
• ✓ 1.88 in. outside diameter
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Made from high quality material

• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 2-3/64 in. x 29/32 in. x 1-3/8 in. x 1-9/64 in.
• ✓ Premium thermostat
• ✓ With jiggle pin
• ✓ This product cannot be shipped to: CA
• ✓ 180 degrees SuperStat

• ✓ Comes with all parts needed for quality repairs
• ✓ Includes easy-to-follow illustrated instructions in English, Spanish & French
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x .75 inches.
• ✓ For 1993-2004 GM 100-140 amp CS 130D series alternators
• ✓ Help Hotline toll-free number printed on kit
• ✓ Contains rectifier, bearings drive end and commutator end & bearing retainer

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy

• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.
• ✓ Makes connecting & disconnecting wires quick & easy
• ✓ 2.0mm2
• ✓ Weight: Approximately: .03 pounds

• ✓ 195 degrees SuperStat
• ✓ With jiggle pin
• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 45209
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature

• ✓ Ships from the USA!
• ✓ Fits Redmax Trimmer Chainsaws Brush Cutter T207071200

• Brand: SPU

• ✓ Contains snap ring & snap ring retainer
• ✓ Help Hotline toll-free number printed on kit
• ✓ Weight: Approximately: .8 pounds
• ✓ Comes with all parts needed for quality repairs
• ✓ This product cannot be shipped to: CA
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters

• ✓ Clear handle & bright bulb for high visibility
• ✓ Strain relief protects test lead at base of test light
• ✓ Shipping Dimensions: Approximately 10.75 x 4.25 x 1.75 inches.
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ Bulb is easy to remove for replacement
• ✓ Tests 6-24 V DC systems

• Engine Displacement (cc): 540
• Manufacturer Warranty: Consumer Use: 2 Years / Commercial Use: 1 Year
• Part Type: Engine Part
• Oil Capacity (oz.): 48
• Crankshaft: 1 in. Dia x 3-5/32 in. L, tapped 7/16-20 in.: Yes
• Fits Models: multiple

• ✓ 0.3 Gal. fuel tank
• ✓ EPA and CARB certified
• ✓ Runs on standard 87+ octane gasoline

• Fits Brands: Universal
• Used With Equipment Type: Mower
• Engine Type: 4 Cycle

• ✓ Fits selected L-head engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Replaces 802592S, 5095H and RJ19LM

• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part

• ✓ Compatible with the SPX3000 electric pressure washer
• ✓ Part # SPX3000-HP

• Product Depth (in.): 8 in
• Returnable: 90-Day
• Fits Models: SPX3000
• Used With Equipment Type: Pressure Washer

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly

• Product Width (in.): 4
• Product Height (in.): 3.375
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Part Number - 14228
• ✓ Weight: Approximately: .26 pounds
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ 180 degrees bottom by-pass
• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Engine Part Type: Flywheel Key
• Product Depth (in.): 4.75

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 0.25
• Product Width (in.): 5.25
• Returnable: 90-Day
• Product Height (in.): 4.25

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 3.438
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Meets EPA and CARB compliant
• ✓ Product is regulated for use with off-road engines and equipment under EPA 40 CFR part 1060 and must be used on engines/equipment built after 1/1/2012
• ✓ Save money and install yourself

• Product Height (in.): 6.325 in
• Fits Models: SRM-2620/T/U, PPT-2620/H, PE-2620, SHC-2620
• Returnable: 90-Day

• ✓ Fits most 3 - 5 gross HP horizontal (pulsa jet) 135000 Briggs & Stratton engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Depth (in.): 4
• Product Width (in.): 0.25
• Product Height (in.): 5
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Fits 450e, 550c and 550ex, 625ex, 675ex and 725ex series, 950-1000 series and professional series 7.75-8.75 engines

• Product Width (in.): 6.63
• Returnable: 90-Day
• Engine Part Type: Cap
• Part Type: Engine Part

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Flywheel Key
• Product Height (in.): 0.5
• Part Type: Engine Part

1

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Depth (in.): 20.25
• Product Height (in.): 1
• Manufacturer Warranty: 1 Year Limited
• Product Width (in.): 1

• ✓ Replaces part# 68838 and 805259
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards

• Engine Part Type: Starter Motor
• Product Depth (in.): 5.063
• Product Width (in.): 8.188

• ✓ Includes line, shut off valve and two clamps
• ✓ Fits most lawn tractors with 1/4 in. i.d. fuel line

• Returnable: 90-Day
• Product Width (in.): 4.75
• Part Type: Engine Part
• Manufacturer Warranty: None