Auto Maintenance Parts Engine Ignition For Sale In Arlington

• ✓ New insulators & hardware
• ✓ All external mounting holes re-threaded
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ New brushes, brush springs and bearings
• ✓ This product cannot be shipped to: CA
• ✓ Rotors electronically tested for amperage & insulation quality

• ✓ Help Hotline toll-free number printed on kit
• ✓ This product cannot be shipped to: CA
• ✓ Quality parts, OEM specifications or better
• ✓ Contains brush holder tolerance ring assembly & heat transfer compound
• ✓ Weight: Approximately: .6 pounds
• ✓ Made in the USA

• ✓ This product cannot be shipped to: CA
• ✓ Part Number - 45028
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

• ✓ New insulators & hardware
• ✓ New brushes, brush springs and bearings
• ✓ New regulators and diode trios on delco SI type
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Additional exchange fees may apply

• ✓ Part Number - 27281
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ 2.15 in. outside diameter
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.

• ✓ This product cannot be shipped to: CA
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ Shipping Dimensions: Approximately 4 x 4 x 1.25 inches.
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets

• ✓ This product cannot be shipped to: CA
• ✓ Resistant to high temperatures
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 27280

• ✓ Provides a quick & reliable crimp-type connection & wire repairs
• ✓ This product cannot be shipped to: CA
• ✓ 5.5mm2
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Brush leads welded, not soldered
• ✓ This product cannot be shipped to: CA
• ✓ High temperature silicone grease used on all bushings, bearings, and planetary gear assemblies
• ✓ New bushings & bearings
• ✓ Additional exchange fees may apply
• ✓ New terminal hardware

• ✓ Tester is designed with a sharp probe tip to pierce insulation includes alligator test lead & provides visual indication of power to help pinpoint any electrical failure
• ✓ Shipping Dimensions: Approximately 11 x 7.7 x 3 inches.
• ✓ Includes multi-tool that strips & cuts wire, crimps ignition & insulated terminals & cuts & rethreads mild steel bolts
• ✓ Mini screwdrivers & fuse puller ideal for electrical repairs in a variety of vehicles including recreational use
• ✓ Offers a convenient solution for almost any vehicle's electrical applications & is packed with items necessary to complete most emergency electrical repairs
• ✓ Packed with the most popular sizes of fuses, terminals, wire nuts, cable ties & wire clips

• ✓ Clear handle & bright bulb for high visibility
• ✓ Wide mouth insulated clip for easy hook-up
• ✓ Sharp heavy-duty steel probe
• ✓ Strain relief protects test lead at base of test light
• ✓ Heavy-duty five foot test lead does not kink
• ✓ Tests 6-24 V DC systems

• ✓ Made from high quality material
• ✓ Part Number - 27271
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Part Number - 45209
• ✓ 195 degrees SuperStat
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Weight: Approximately: .18 pounds
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ Premium thermostat

• ✓ All external mounting holes re-threaded
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Additional exchange fees may apply
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ This product cannot be shipped to: CA
• ✓ New insulators & hardware

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .2 pounds
• ✓ Quality construction ensures exact fit & a long, trouble-free life
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ 180 degrees bottom by-pass

• ✓ Assembled dimension: 21 in. W x 20.5 in. D x 19.50 in. H
• ✓ Oversize muffler with safety heat shield for quiet operation
• ✓ 18 Amp, 12-Volt DC output for external source such as hot water heaters

• Orientation: Horizontal
• Fuel Tank Capacity (gallons): 1.8
• Engine Make: OEM Branded

24

• Product Depth (in.): 24
• Engine Make: Briggs and Stratton
• Oil Capacity (oz.): 20
• Product Height (in.): 24
• Self-lubricating heavy-duty bearing of steel-backed teflon-coated bronze to withstand load and reduce wear: Yes
• Certifications and Listings: CARB Compliant

• ✓ 180 degrees bottom by-pass
• ✓ Part Number - 14228
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ This product cannot be shipped to: CA

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Depth (in.): 0.5
• Product Height (in.): 0.1
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Height (in.): 6.75
• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes
• Engine Part Type: Carburetor
• Returnable: 90-Day
• Product Width (in.): 4
• Product Height (in.): 3.375
• Manufacturer Warranty: One year limited warranty

• ✓ 46 in. primary blade drive belt
• ✓ Genuine Briggs & Stratton replacement belt
• ✓ For Murray lawn tractors

• Product Width (in.): 46 in
• Returnable: 90-Day
• Used With Equipment Type: Walk-Behind Mower

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Height (in.): 9
• Product Width (in.): 0.25
• Product Depth (in.): 6.75
• Manufacturer Warranty: One year limited warranty

• ✓ Briggs & Stratton genuine product
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Used With Equipment Type: Walk-Behind Mower
• Returnable: 90-Day
• Hub Required: No hub connection available
• Engine Part Type: Miscellaneous Part

• ✓ 9 HP horizontal shaft design for heavy duty/industrial application
• ✓ Auto decompression feature for east starting
• ✓ 8.2:1 compression ratio

• Orientation: Horizontal
• Product Weight (lb.): 68lb
• Fits Models: Ideal for agricultural equipment, construction equipment, or any smaller other small applications

• ✓ Vertical engine
• ✓ Overhead valve design (OHV) for cooler operation

• Used With Equipment Type: Riding Mower
• Engine Type: 4 Cycle
• Product Width (in.): 16
• Manufacturer Warranty: 2 years limited

• ✓ Briggs & Stratton commercial power designs and manufactures premium-grade Vanguard engines ranging from 5.5 to 36.0 gross horsepower, proven on work sites around the world, Vanguard engines are engineered to elevate the reliability standard, which helps people get more done in less time, backed by a global 3-year commercial limited warranty, Vanguard engines are ready to take on any work site challenge
• ✓ Overhead valve design (OHV) for cooler operation
• ✓ Low oil shutdown system significantly reduces the chance of engine damage due to insufficient lubrication

• Product Height (in.): 16
• Returnable: 90-Day
• Part Type: Engine Part