Auto Maintenance Parts Engine Ignition For Sale In Albuquerque

• ✓ Includes (200) 4 in. cable ties, (200) 6 in. cable ties, & (100) 8 in. cable ties
• ✓ Insoluble in common solvents, alkalis, dilute mineral acids, most organic acids, & most petrochemicals
• ✓ Durable 6/6 pure virgin nylon material
• ✓ Shipping Dimensions: Approximately 10.14 x 4.3 x 4.3 inches.
• ✓ UV black color
• ✓ This product cannot be shipped to: CA

• ✓ Use with ATO fuses up to 15 amps
• ✓ Available in side or bottom positioned 1/4 in. Q.C. terminal configurations
• ✓ Weight: Approximately: .13 pounds
• ✓ Unit with bottom Q.C. terminals includes detachable side mounting brackets

• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .4 pounds
• ✓ Stud type low voltage 6-12 volts circuit breakers SAE Type I
• ✓ 20 amp circuit breaker

• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Part Number - 45028
• ✓ 180 degrees SuperStat
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ 1-47/64 in. x 29/32 in. x 13/16 in.

• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ Weight: Approximately: 12.5 pounds
• ✓ Rotors electronically tested for amperage & insulation quality

• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ 1.88 in. outside diameter
• ✓ Made from high quality material
• ✓ Weight: Approximately: .2 pounds
• ✓ Part Number - 27272

• ✓ Comes with all parts needed for quality repairs
• ✓ Contains snap ring & snap ring retainer
• ✓ Quality parts, OEM specifications or better
• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Help Hotline toll-free number printed on kit
• ✓ Weight: Approximately: .8 pounds

• ✓ 1/4 in. terminal
• ✓ Button terminals
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .34 pounds

• ✓ OE Equivalent thermostat matches fit & function when a replacement part is needed
• ✓ Shipping Dimensions: Approximately 2.63 x 2.625 x 2.625 inches.
• ✓ 180 degrees bottom by-pass
• ✓ 2-9/32 in. x 47/64 in. x 1-31/32 in. x 1-3/8 in.
• ✓ With 1 seal

• ✓ 6.5 HP horizontal shaft design for heavy duty industrial application
• ✓ Features low oil shutdown for protection

• Oil Capacity (oz.): 20.1
• Orientation: Horizontal
• Product Width (in.): 15
• Returnable: 90-Day

• ✓ Fits interchangeably on either 24” side of the deck
• ✓ Handles reaches 26-1/2 in. from the base of the platform

• Used With Equipment Type: Utility
• Fits Brands: Magliner
• Product Depth (in.): 29.5
• Product Height (in.): 6

• Certifications and Listings: No Certifications or Listings
• Part Type: Engine
• Case-hardened steel timing chain: Yes
• Returnable: 30-Day
• Manufacturer Warranty: See limited engine warranty pdf file
• Product Width (in.): 14

• Engine Displacement (cc): 389
• Part Type: Engine
• Engine Type: 4 Cycle
• Recommended Oil Type: 10W-30
• Brand/Model Compatibility: It is designed to provide reliable power for small engine applications such as pressure washers, compressors, cement mixers, log splitters, transfer pumps, chippers/shredders and much more.
• Certifications and Listings: cUL Listed

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 88 in
• Part Type: Engine Part
• Fits Brands: Briggs and Stratton
• Fits Models: Multiple

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 1
• Returnable: 90-Day
• Part Type: Engine Part

• ✓ Fits most Toro snowblowers model year 1990 and newer
• ✓ Large grip for comfort

• Returnable: 90-Day
• Product Height (in.): 1 in
• Product Width (in.): 5.5 in
• Used With Equipment Type: Snow Blower

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 3.375
• Engine Part Type: Carburetor

• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ For most 3 - 3.8 HP engines
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Width (in.): 0.25
• Product Depth (in.): 10
• Part Type: Engine Part

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Returnable: 90-Day
• Product Height (in.): 1.75
• Manufacturer Warranty: 1 Year Limited
• Product Depth (in.): 0.5

• ✓ 97.7cc for reliable power
• ✓ Adjustable throttle is easy to access
• ✓ Keyway shaft design for heavy duty and industrial applications

• Engine Displacement (cc): 97.7
• Product Weight (lb.): 22.5lb
• Product Depth (in.): 12

• ✓ Compatible with Magliner 2-wheel hand trucks
• ✓ Reinforced material in high-stress areas prevents breakage under heavy loads

• Product Width (in.): 9.25
• Fits Brands: Magliner
• Used With Equipment Type: Utility
• Returnable: 90-Day

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

• Part Type: Engine Part
• Product Depth (in.): 6.75
• Manufacturer Warranty: One year limited warranty
• Product Height (in.): 9

• ✓ 18 Amp, 12-Volt DC output for external source such as hot water heaters
• ✓ 15 HP OHV horizontal shaft design for heavy duty/industrial application
• ✓ Offers great fuel efficiency, quieter operation and longer life
• ✓ Assembled dimension: 21 in. W x 20.5 in. D x 19.50 in. H

• Manufacturer Warranty: 3 Year Warranty
• Engine Type: 4 Cycle

• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Fits Briggs & Stratton 21 and 28 single cylinder starter
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Product Width (in.): 0.25

• ✓ EPA and CARB certified
• ✓ 212cc displacement

• Certifications and Listings: No Certifications or Listings
• Returnable: 90-Day
• Oil Capacity (oz.): 16
• Used With Equipment Type: Log Splitter,Pressure Washer

• ✓ Part Number - 45209
• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Premium thermostat
• ✓ This product cannot be shipped to: CA
• ✓ With jiggle pin
• ✓ Weight: Approximately: .18 pounds

4

• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 4
• Engine Part Type: Valve
• Product Height (in.): 4
• Product Width (in.): 0.25
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines: Yes