Auto Maintenance Parts Engine Ignition For Sale In Alaska

• ✓ Weight: Approximately: .05 pounds
• ✓ (2.0mm2) .250 in. tab (6.4mm)
• ✓ Shipping Dimensions: Approximately 4 x 2 x .68 inches.

• ✓ Weight: Approximately: 12.7 pounds
• ✓ Rotors electronically tested for amperage & insulation quality
• ✓ Startors tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ Rotor slip rings checked for concentricity or replaced with New
• ✓ This product cannot be shipped to: CA
• ✓ Additional exchange fees may apply

• ✓ Made from high quality material
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 11.3 x 1.92 x 1.92 inches.
• ✓ Weight: Approximately: .2 pounds
• ✓ Resistant to high temperatures

• ✓ Contains starter drive, drive end bushing, needle bearing set, brush set & thrust washers
• ✓ Shipping Dimensions: Approximately 9.75 x 7 x 2.25 inches.
• ✓ For 1988-2000 GM SD210 & SD260 direct drive starters
• ✓ Comes with all parts needed for quality repairs
• ✓ This product cannot be shipped to: CA
• ✓ Help Hotline toll-free number printed on kit

• ✓ Shipping Dimensions: Approximately 9.25 x 7.25 x 6.63 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Additional exchange fees may apply
• ✓ Starters tested to meet or exceed O.E. standards for insulation quality, phase balance, and amp output, or replaced with new
• ✓ New brushes, brush springs and bearings
• ✓ All fans & pulleys plated or dipped to inhibit rust & corrosion

• ✓ With jiggle pin
• ✓ Premium thermostat
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.
• ✓ Part Number - 45878
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life

• ✓ Unique v-notch, non-linear design that reduces cycling by precisely metering the amount of coolant needed to maintain proper operating temperature
• ✓ Part Number - 45028
• ✓ Premium thermostat
• ✓ Offers more efficient temperature control resulting in faster warm-ups, better fuel economy, & longer engine life
• ✓ 180 degrees SuperStat

• ✓ Resistant to high temperatures
• ✓ Grooved
• ✓ Weight: Approximately: .2 pounds
• ✓ 1.88 in. outside diameter
• ✓ Made from high quality material

• ✓ Button terminals
• ✓ Shipping Dimensions: Approximately 4.8 x 2.8 x 2.25 inches.
• ✓ Includes 2 removable keys
• ✓ Weight: Approximately: .34 pounds

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines

• Engine Part Type: Carburetor
• Part Type: Engine Part
• Product Height (in.): 2.781

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Engine Part Type: Spring
• Part Type: Engine Part
• Returnable: 90-Day

• Compatible with Magliner 2-wheel hand trucks: Yes
• Used With Equipment Type: Utility
• Returnable: 90-Day
• Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
• Product Height (in.): 10
• Fits Models: All Magliner brand hand trucks

• ✓ Crankshaft: 1 in. Dia x 3-5/32 in. L keyway, tapped: 7/15-20
• ✓ Full lubrication with spin-on oil filter
• ✓ Overhead valve design (OHV) for cooler operation

• Product Height (in.): 0
• Engine Part Type: Engine
• Fits Models: multiple

• ✓ Additional cold weather accessories are available
• ✓ Remove the old component before installing the new
• ✓ For use in extreme cold weather where heavy icing occurs

• Fits Brands: Generac
• Product Depth (in.): 10 in
• Product Height (in.): 3 in

• ✓ Used on Vanguard model 29,30,35, and 38 engines.
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Manufacturer Warranty: 1 Year Limited
• Product Height (in.): 0.1
• Product Width (in.): 0.5
• Part Type: Engine Part

• ✓ Crankshaft 3-5/32 tapped 7/16-20, keyway, 25 mm Dia
• ✓ Ready start starting system with no prime, no choke, no worries, just pull for power

• Brand/Model Compatibility: multiple
• Used With Equipment Type: Walk-Behind Mower
• Product Weight (lb.): 25 lb
• Product Width (in.): 12.25 in

• Genuine factory replacement part: Yes
• Fits Models: STD4422HO, STD67522BS, STP4422HO, STP67522BS, STS67522BS
• Returnable: 90-Day
• Product Height (in.): .5 in
• Fits Brands: Swisher
• Product Depth (in.): 47 in

• ✓ There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Part Type: Engine Part
• Manufacturer Warranty: One year limited warranty
• Product Width (in.): 5.25
• Returnable: 90-Day

• ✓ Quick adjustment knobs (2)
• ✓ Upper handle knobs + bolts (2)
• ✓ Bag handle

• Used With Equipment Type: Mower
• Product Width (in.): 1
• Fits Models: MJ402E

• Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations: Yes
• Returnable: 90-Day
• Manufacturer Warranty: One year limited warranty
• Part Type: Engine Part
• Product Height (in.): 5
• Engine Part Type: Gasket

• ✓ Part Number - 27174
• ✓ Shipping Dimensions: Approximately 6.5 x 5.25 x .44 inches.
• ✓ Resistant to high temperatures
• ✓ Made from high quality material

• ✓ Overhead valve design (OHV) for cooler operation
• ✓ Gear-driven dura-lube splash lubrication bathes all internal engine parts with oil

• Product Width (in.): 16
• Brand/Model Compatibility: BRiggs
• Engine Type: 4 Cycle
• Orientation: Vertical

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations

• Product Height (in.): 6.75
• Manufacturer Warranty: One year limited warranty
• Product Depth (in.): 5.5
• Part Type: Engine Part

2 in

• ✓ For use with: select Murray snow throwers
• ✓ Briggs & Stratton genuine product

• Product Depth (in.): 2 in
• Hub Required: No hub connection available
• Product Height (in.): 2 in
• Fits Models: Multiple

• Part Type: Engine Part
• Engine Part Type: Hose Connector
• Product Depth (in.): 0.75
• Product Width (in.): 1
• Manufacturer Warranty: 1 Year Limited
• Used on a variety of horizontal and vertical engine carburetors. Check the engine model parts manual for the correct part #.: Yes

• ✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• ✓ Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts

• Product Width (in.): 0.25
• Manufacturer Warranty: One year limited warranty
• Returnable: 90-Day
• Product Height (in.): 5

• Product Depth (in.): 8 in
• Fits Brands: Sun Joe
• Part Type: Tune-Up Kit
• Compatible with the SPX3000 electric pressure washer: Yes
• Returnable: 90-Day
• Manufacturer Warranty: Satisfaction Guaranteed