Atv Snow Removal

• ✓ Protects front of snowblower from damage due to cracks and bumps
• ✓ Protects snow blower from damage
• ✓ Set of 2 matching skids
• ✓ Designed for cracked, uneven sidewalks and gravel driveways

• Returnable: 90-Day
• Product Height (in.): 3.25

• ✓ Easy to install
• ✓ Helps protect a snow blower from damage when the impeller comes in contact with a solid object

• Product Depth (in.): 1.5
• Part/Accessory Type: Shear Pin
• Product Height (in.): 6.5
• Fits Models: Fits MTD 300/500/600 series two-stage snow blowers, 2005 and after

• ✓ Help keep your snow blower operating effectively and effectively
• ✓ Protect your investment and safety by shearing under stress
• ✓ Simple and easy to replace
• ✓ Help prevent non budgeted expenditures for costly repairs to a vital piece of equipment in the midst of snow season

• Product Width (in.): 0.5
• Product Height (in.): 2

• ✓ Protects front of snowblower from damage due to cracks and bumps
• ✓ Set of 2 matching skids
• ✓ Protects snow blower from damage

• Fits Brands: Any that have a 3.5 in. and 5.75 in. mounting bolt pattern.
• Manufacturer Warranty: 5 year warranty against bending or breakage.
• Product Width (in.): 1.12

• ✓ Snow Joe product
• ✓ Ribbed design

• Fits Models: 323E
• Part/Accessory Type: Drive Belt
• Returnable: 90-Day

• ✓ Protects front of snowblower from damage due to cracks and bumps
• ✓ Set of 2 matching skids
• ✓ Lifts snow blower up over cracks and bumps
• ✓ Original wide-tip design gives maximum float over gravel and grass

• Fits Models: Any that have a 1.5 in. or 4.5 in. mounting bolt pattern.
• Manufacturer Warranty: 5 year warranty against bending or breakage.

• ✓ Also can be used to remove snow from Auger housing
• ✓ Contains 1 tool
• ✓ Can be used to remove snow from chute

Universal

• Fits Models: Universal
• Part/Accessory Type: Clean-Out Tool
• Fits Brands: Universal

• ✓ Reversible blade for 2nd usage once the first blade is worn
• ✓ Double use poly scraper bar allows you to plow delicate and expensive surfaces such as stamped concrete, natural stone or new asphalt laneways or lots without fear of damage or scars sometimes associated with metal scrapers

SNOWBEAR

• Manufacturer Warranty: 1 Year Limited
• Part/Accessory Type: Snow Plow Kit
• Fits Models: SNOWBEAR
• Fits Brands: SNOWBEAR

• ✓ Replace your headlight assembly in just minutes, whether during the off season or in the middle of critical snow removal operations
• ✓ with this headlight assembly, removing snow is both safer and easier no matter what the lighting conditions
• ✓ Complete replacement assembly includes everything you need to easily and suCCessfully replace the headlight on your Stanley or Beast snow blower

• Fits Models: 30SB, 36SB, 45SB, 30SS, 36SS, 45SS
• Product Width (in.): 6
• Product Depth (in.): 2

• ✓ 0.325 in. Dia bolt shank with 0.310 in. Dia thread
• ✓ Purposely designed to snap if the auger jams or clogs
• ✓ Designed for Ariens deluxe series sno-thro models

• Fits Models: Deluxe Series Sno-Thros
• Product Depth (in.): 11.5
• Manufacturer Warranty: 30 Day

• ✓ Mushroom shoe design rotates 360 to eliminate catching unwanted objects
• ✓ All mounting hardware included
• ✓ Easy bolt-on installation

• Fits Models: 29000 and 29100
• Part/Accessory Type: Skid Shoe/Mat
• Manufacturer Warranty: 1 year limited

• ✓ The cab material is nylon reinforced, rip stop vinyl material
• ✓ Fits Honda HSS724A, HSS928A and HSS1332A snow blowers
• ✓ Custom fit cover with Honda Logo

• Manufacturer Warranty: 1 year residential and 90 days commercial
• Fits Brands: HONDA
• Product Width (in.): 21.25

• ✓ Designed for cracked, uneven sidewalks and gravel driveways
• ✓ Helps protect blower against damage
• ✓ Made from 1/4 in. steel plate for added durability

• Fits Models: Any machine that as a bolt pattern 2.5" or 5" center to center
• Returnable: 90-Day
• Product Depth (in.): 12

• ✓ Easy to install
• ✓ For use with Toro CCR single stage throwers
• ✓ Helps your Toro CCR Snowblower reach year-long peak performance
• ✓ Genuine Toro parts ensure compatibility and quality
• ✓ Includes all necessary hardware for replacement

• Returnable: 90-Day

• ✓ Shave plate scoops snow into the augers allowing the paddles to throw snow away from the paved path
• ✓ Includes: (4) 710-0134 bolts and (4) 712-04064

• Returnable: 90-Day
• Part/Accessory Type: Snow Plow Kit
• Product Height (in.): 1.75
• Product Depth (in.): 23.5

• ✓ Genuine Toro parts ensure compatibility and quality
• ✓ Kit includes 2 replacement paddles (Part # 117-7700)

• Fits Brands: Toro
• Part/Accessory Type: Skid Shoe/Mat
• Manufacturer Warranty: 1-year warranty for residential use

• ✓ Skid shoes are reversible for longer wear life
• ✓ Installation hardware included
• ✓ Works on even or uneven surfaces and helps prevent stone discharge of gravel surfaces by adjusting the skid shoe to their highest point
• ✓ Shoes are adjustable to raise or lower the snow blower housing off the ground
• ✓ Made of durable polyethylene material

• Product Depth (in.): 8.25 in

• ✓ Cut into snow drifts and direct snow into the snow blower for more complete removal
• ✓ Knife through iced-over snow drifts

• Fits Brands: Stanley;Beast
• Product Width (in.): 2
• Returnable: 30-Day
• Product Height (in.): 19

• ✓ Made of durable polyethylene material
• ✓ Installation hardware included
• ✓ Fits models 939003, 920001, 921005, 921006 and 926027

• Fits Models: 939003, 920001, 921005, 921006, 926027
• Product Depth (in.): 8.25 in
• Product Width (in.): 6.13

• ✓ Sold as a kit: one halogen work light, one LED brake light
• ✓ Easy installation
• ✓ Mounting hardware included

• Returnable: 90-Day
• Manufacturer Warranty: 1 year limited warranty
• Product Width (in.): 13

• ✓ Snow deflector reduces spray and increases visibility
• ✓ Includes deflectors, skid shoes and plow marker kit
• ✓ Will help prevent salt and road debris from damaging vehicle grill and /or hood
• ✓ Heavy-duty linear actuator with internal clutch and chain lift

• Fits Models: 84 in. SNOWBEAR snowplows
• Manufacturer Warranty: 1 Year Limited

• ✓ Made of ultra-high molecular weight polyethylene
• ✓ For use on power max and power max HD snowblowers manufactured in 2013 and later

• Manufacturer Warranty: 1-year
• Fits Brands: Toro
• Part/Accessory Type: Skid Shoe/Mat
• Product Width (in.): 6

• ✓ Safely clears snow from the chute
• ✓ Universal mount works with most electric snow blowers
• ✓ Made from durable hardened plastic
• ✓ Satisfaction guaranteed

• Returnable: 30-Day

• ✓ Protects front of snow blower from damage due to cracks and bumps
• ✓ Designed to lift snow blowers up over sidewalk cracks or bumps

• Part/Accessory Type: Skid Shoe/Mat
• Fits Brands: Any machine that as a bolt pattern 2.5" or 5" center to center
• Product Depth (in.): 12
• Returnable: 90-Day

• ✓ All necessary replacement hardware included
• ✓ Helps keep your snowblower operating efficiently over time
• ✓ Compatible with Toro Powerlite and CCR Powerlite Snowblowers

• Returnable: 90-Day
• Fits Brands: Toro
• Part/Accessory Type: Snow Plow Kit

• ✓ Premium black powder coat
• ✓ Will help prevent salt and road debris from damaging vehicle grill and /or hood
• ✓ For use on 88 in. SNOWBEAR snowplows

• Fits Models: SNOWBEAR snowplows
• Manufacturer Warranty: 1 Year Limited
• Returnable: 90-Day

• ✓ 324-128 drop kit is a simple bolt-on kit designed to lower the attachment point of your SNOWBEAR plow for optimum performance when plowing snow
• ✓ Compatible with all 2013+ SNOWBEAR Plows
• ✓ Fastens easily to existing plow frame

• Product Width (in.): 30
• Returnable: 90-Day
• Product Height (in.): 12