Illustrated book is recommended for anyone who climbs and works in trees. Also, tricks of the trade, knots for the climber, equipment and supplies, skill performance sheets, and safety standards.
Its fluid interior design and Keylock system facilitate manipulations. The D shape is particularly suited for connection to equipment such as descenders or positioning lanyards. The asymmetrical aluminum Am'D carabiner has a D shape particularly suited...
Specs
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
For enhanced torso movement. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. Interlocking leg buckles and tongue buckle waist.
40,000 lb tensile, 4,000 lb working load. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling. Stainless steel sideplates and axle. Aluminum sheave and bushing.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Specs
Meets OSHA, ANSI and CSA requirements: Specs
Six foot long: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Unlike one piece climbers, the CTB Climbers utilize an aluminum lower "J" portion that is precision milled to exact tolerances, then tailor-matched to an aerospace quality aluminum upright.
Product Features
Tempered for hardness and strength: Product Features
2-5/8 in spike (overall length is 4-1/2 in, usable length is 2-5/8 in): Specs
Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your climbing harness.
Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Goat skin leather and stretch nylon: Specs
Ergonomic cut for great dexterity without being too tight: Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Neoprene cuff with Velcro closure: Product Features
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
100% solution dyed, highly visible, orange polyester rope in a single braid 12-strand construction. Single braid construction eliminates the core; nubby 12-strand construction for hand climbers.
It acts as a false crotch using rigging lines and a friction device to lower cut material. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates.
Keep your ropes clean and prevent breakage! Abrasive dirt can prematurely wear your expensive ropes out! Handy all mesh bag for use when washing your climbing/lifeline ropes. Simply put rope in the bag, pull the drawstring tight, and youre ready to wash...
1/2"thick felt cushions the leg. Top grain leather. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability.
Aluminum O-right attachment point and rope bridge allow for added lateral movement. Aluminum waist and leg strap buckles are safe and secure, yet quick and easy to operate. 3 accessory loops, ring and snap.
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Specs
Product Features
Braided nylon construction: Specs
Available in a 9ft. or 15ft. lanyard: Specs
Metal Grillon lever for releasing line: Specs
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Major Axis Break Strength 26KN (5845lb). Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never...
Specs
Overall width 2.8": Specs
Gate opening 1": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength. Use with extra high strength or common cable, left hand lay only.
Use for deployment from ground or for repositioning while suspended in trees. When weight is thrown, line will unfurl tangle-free. Feed your throw line into this bag hand-over-hand.
Specs
9 in. high x 7 in. wide: Specs
Weaver medium throw line deployment and storage bag, blue: Specs
An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length adjustment.
Overall length 8': Specs
Includes the Buckadjuster one-way cam: Product Features
New T-shaped design! Traditional 1-inch thick foam liner is layered between an outer layer of yellow steer hide leather and inner layer of soft brown leather.
CMI provides the following safety guidelines when using the Rope Jack: Never use a cheater bar increase leverage — this may damage the unit, the rope, or severely injure personnel Only one person should operate the unit using one hand only Never use...
Fits virtually all gaffs. The gaffs of pole climbers shall be covered with safety caps when not being used for their intended use." Sold in pairs. Ship weight .5 lb. Helps you to be complient with OSHA 1910.268(g)(3)(i) ".
Specs
Hook-and-loop (Velcro) straps hold it to the stirrup: Product Features
Work load 650 lb. Work load 810 lb. 16-strand, treated polyester with a stabilized nylon core for durability. Soft, strong and spliceable! Maximum firmness for better "Footlock" climbing.
Specs
Fiber: nylon core, polyester cover: Specs
Length: 120ft
Color: Black/Red/White
Firm, low stretch rope holds knots well: Specs
High visibility in trees, helps identify which rope is yours: Specs
