Measure 12" in diameter x 14" high and holds 150' of 1/2" or 9/16" rope. A scissor snap offers easy attachment to belt. Helps keep rope coiled, tangle-free and protected! Made from 1,200-denier polyester, these bags feature spiral wire thats attached...
Different color thimbles to easily distinguish each end of the lanyard. The combination of braided rope and twisted rope offers the best combination for this application. The perfect work positioning lanyard! Provides the climber a means to stay continuously...
Specs
Different color thimbles to easily distinguish each end of the lanyard: Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers. Buckingham combines their popular Big Buck and Cinch Velcro pad, to create the ultimate climber pad! Adjustable velcro pad with increased surface area and cushion creates superior...
Specs
Sold per set: Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (Bashlin is not a brand we sell, however, these pads will work with them if you have a pair): Specs
It provides a mechanical advantage ratio of 5:1. CMI approves the Rope Jack for use with static ropes from 3/8 to 5/8-inch in diameter. This small profile makes it easy to transport — even for a climber! CMI designed the Rope Jack for one-handed operation...
The 24-strand Tite-Braid cover virtually eliminates cover milking and the polyester core creates a firm rope that stays flexible, without work hardening, throughout its service life.
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Product Features
Specs
Ship wt: 2 lbs.
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
Available in a 9ft. or 15ft. lanyard: Specs
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Small size — wide opening! Kong manufactures this carabiner using a high-quality aluminum alloy. The unique shape and wide opening make this a versatile carabiner. Use it for many activities including climbing and sailing.
Nickel plated rivets. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability. 1/2"thick felt cushions the leg.
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Dual colors of black and orange adds visibility in motion! Bright high visibility colors enable easy identification.
Specs
Cordura with 7/8-inch nickel-plated rings.: Specs
Weight: 8 oz
Shot-filled weight: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your climbing harness.
Product Features
Neoprene cuff with Velcro closure: Product Features
Goat skin leather and stretch nylon: Specs
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Carabiner hole to attach gloves to harness: Product Features
Keep your ropes clean and prevent breakage! Abrasive dirt can prematurely wear your expensive ropes out! Handy all mesh bag for use when washing your climbing/lifeline ropes. Simply put rope in the bag, pull the drawstring tight, and youre ready to wash...
Classic master saddle that features a step-in waist belt and two side-mounted friction buckles and individual leg straps with interlock buckles. Suspension system features a medium Dee-ring and six connection loops.
Bright high visibility colors enable easy identification. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. If every tree were the same, one weight would do the job. So you need options! Lower-throwing weights provide the highest entry,...
The gaffs of pole climbers shall be covered with safety caps when not being used for their intended use." Sold in pairs. Helps you to be complient with OSHA 1910.268(g)(3)(i) ". Velcro on and off quickly! Protect your expensive spurs as well as your gear...
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary.
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
The long gaff is good for thick-bark trees: Product Features
The wide lower hole allows the carabiners lanyard and/or footloop to be easily attached. There is a safety catch integrated into the body of the rope clamp to help prevent snagging.
Product Features
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
Aluminum and chrome-plated steel contruction: Specs
Less hand fatigue when ascending ropes: Product Benefits
Wide opening allows the handle to be easily grasped, even with gloves: Product Features
Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying. Ship wt 0.5 lbs. Ring can clip to saddle to keep saw close to your side when not using.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Facilitates Manipulations Fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner Keylock system to avoid any involuntary snagging of the carabiner H Profile Ensures an improved strength-to-weight ratio...
Specs
Material(s): aluminum: Specs
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays firm and round in use.
Specs
Product Features
Non-rotational: Specs
Can also be used for light/medium duty rigging operations: Product Features
Class I Non-Spliceable: Specs
Weight: 12 lbs.
Low stretch, high strength, non-rotational, maintains excellent flexibility: Product Features
Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. 5,000 lbs test. Two top-quality 22SL safety snaps and thimble for freedom of movement.
For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength. Use with extra high strength or common cable, left hand lay only.
