Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your climbing harness.
Product Features
Neoprene cuff with Velcro closure: Product Features
Carabiner hole to attach gloves to harness: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Goat skin leather and stretch nylon: Specs
Ergonomic cut for great dexterity without being too tight: Product Features
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
SLH12 is rope and snaps only; no prusik. Cover yarns treated to enhance abrasion resistance. The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use.
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Fits all Weaver saddles listed except 3114. Nickel plated snaps connect to saddles that are equipped with four small dees. Adjustable in height. 2" elastic suspenders attach to climbing saddles, distributing weight of attached gear.
Aluminum frame with chrome plated steel cams. This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". The handle openings are large allowing easy use, even with gloved hands.
Product Features
Lower holes for connecting a lanyard: Product Features
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes): Product Features
6' length, single leg. Meets OSHA, ANSI and CSA requirements. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest...
Specs
Six foot long: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
90 degree twist in the adjuster aligns a carabiner perfectly to your saddle. No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline...
Includes the Buckadjuster one-way cam: Product Features
Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. Interlocking leg buckles and tongue buckle waist. For enhanced torso movement.
When you are ready to disconnect, the sleeve opens easily, even if you are wearing gloves! The keylock system prevents snagging on your rope or bolts. This carabiner features a screw sleeve.
Specs
Product Features
Screw sleeve opens easily — even when wearing gloves: Product Features
Weight (grams): 240: Specs
Rope diameter (mm): 26-1/2: Specs
Reinforced auto block sleeve meets ANSI lateral stress guidelines: Product Features
Strength, durability and style! Features a patented design which gives them strength, durability, and style. These Climbers also feature a dual purpose "Grip Strip" on the bottom of the climber.
Product Features
2-5/8 in spike (overall length is 4-1/2 in, usable length is 2-5/8 in): Specs
Tempered for hardness and strength: Product Features
The asymmetrical aluminum Am'D carabiner has a D shape particularly suited for connection to diverse equipment such as descenders or positioning lanyards. The D shape is particularly suited for connection to equipment such as descenders or positioning...
Specs
Material(s): aluminum: Specs
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
160 pages with more than 200 illustrations. By Jeff Jepson. A complete guide to successful tree felling and wood cutting methods! Loaded with practical information that is essential to the safety and success of any tree-felling and wood cutting operation.
Pull the handle again and allow the forward cam to loosen. Its design allows you to attach it mid-line. Releasing the rope jack may take practice. CMI provides the following safety guidelines when using the Rope Jack: Never use a cheater bar increase...
Carabiner shown on sliding prusik not included with 11CV or 12CV. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
The more pressure that is applied, the deeper into the block the strand and taper are pulled. The Finishing Cap Not a necessary component of the Wire Stop. The Wire Stop eliminates the need for the "J," "lag," or "eye," hooks, thimbles, through bolts,...
Adjustable from 3 to 6 feet. 5,000 tensile strength. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope.
It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. It acts as a false crotch using rigging lines and a friction device to lower cut material.
Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. Snap version (HP26) features Buckingham's Steel Safety Snaps.
Type: 26-inch Blue Streak Prusik, Steel Snap
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
Safety load rated at 1,200 lb. Assorted colors.1" x 24 A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing.
The toothed cam has a self-cleaning slot to optimize performance even with dirty or frozen ropes. The wide opening allows the handle to be easily grasped, even with gloves. There is a safety catch integrated into the body of the rope clamp to help prevent...
Product Features
Toothed cam with self-cleaning slot optimizes performance even with dirty or frozen ropes: Product Features
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
Less hand fatigue when ascending ropes: Product Benefits
Ergonomic molded handle allows a comfortable yet powerful grip: Product Features
1/2-inch, 5/8-inch, and 3/4-inch in orange 9/16-inch in yellow Arborists commonly use Stable Braid in combination with block pulleys and slings for a strong, wear resistant method of controlled lowering of tree limbs.
A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. Ship Wt. .5 lb. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with...
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Works very well with mechanical ascension devices. Extremely light with great feel and knot-tying characteristics. Blaze is an innovative, lightweight 11mm spliceable double-braided rope that boasts a smooth 24-strand braided cover.
