Lower straps feature split rings which makes securing the stirrup to your foot fast and easy. Overall length is 26". Ten holes for perfect adjustment and nickel plated hardware. Riveted for extra strength! Lower straps are necessary to secure spur sets...
Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. Interlocking leg buckles and tongue buckle waist. For enhanced torso movement.
Bright high visibility colors enable easy identification. Dual colors of black and orange adds visibility in motion! Bottom loop weights allow quick attachment of carabiners/throw line.
Specs
Weight: 8 oz
Shot-filled weight: Specs
Cordura with 7/8-inch nickel-plated rings.: Specs
High visibility blank and orange adds visibility in motion: Specs
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
Red core alerts you of excess wear: Product Features
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet. 20 essential knots cover most any rope tying situation: Bowline, Square Knot, Water Knot, Rolling Hitch, Sheet Bend (Doubled...
Kong manufactures each of their carabiners with the highest possible quality. Kong also equipped this carabiner with a keylock system. Start by lifting the sleeve, then rotating it, and then pulling the gate.
Product Features
Specs
D-shape prevents rotation and distributes load along major axis: Product Features
XTC Fire was specifically designed for the demanding needs of the professional arborist. Extremely tight braid and smooth cover works well with cammed devices. This construction keeps a firm, round shape that provides an extra measure of safety.
It is identified by a green ink stripe. Lightweight, high strength 12-strand climbing line, and the most widely used rigging line in the arborist industry! It resists snags and has excellent knot-holding ability.
This makes the flipline completely adjustable. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Specs
Overall length: 10 feet: Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
This shape also distributes the load along the major axis of the part. When you are ready to disconnect, the sleeve opens easily, even if you are wearing gloves! This carabiner features a screw sleeve.
Specs
Product Features
Keylock: Yes: Specs
Made in Italy: Product Features
Material: Carbon steel: Specs
Eyelet diameter (mm): N/A: Specs
Rope diameter (mm): 26-1/2: Specs
Keylock system prevents snagging: Product Features
Average tensile strength: Unspliced : 8100 lb. 16-strand, treated polyester with a stabilized nylon core for durability. Wt 7.7 lb per 100 ft. Spliced : 6500 lb. Full 1/2" size diameter for easier grip.
Specs
SPLICED: 6500 lb. Work load 650 lb.: Specs
Average tensile strength:: Specs
Maximum firmness, which is good for climbing: Specs
It also requires less than half the parts (13) required in a traditional system installation (31). Although the wire stop is only 1 1/4 inches long, it holds close to 100 percent of the breaking strength of the strand itself, which is more than 15,000...
Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is more evenly distributed for improved performance.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
The keylock system prevents snagging on your rope or bolts. High-quality aluminum construction! Kong manufactures this carabiner using a high-quality aluminum alloy. The automatic sleeve makes this carabiner suitable for professional use!
90 degree twist in the adjuster aligns a carabiner perfectly to your saddle. No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline...
Includes the Buckadjuster one-way cam: Product Features
Lightweight and flexible; excellent knot-holding capability; great for footlocking. Double braid construction nylon over polyester. The 24-strand cover is a FULL 1/2-inch (12.7mm) for easy handling.
If every tree were the same, one weight would do the job. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through...
The handle openings are large allowing easy use, even with gloved hands. Use with rope diameters 8 to 13 mm. Aluminum frame with chrome plated steel cams. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved...
Specs
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
