Extremely light with great feel and knot-tying characteristics. Has smoothest cover for mechanical ascension; low elongation with minimal bounce. 11mm (0.5in) diameter. Works very well with mechanical ascension devices.
Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet.
Durable, weather resistant neoprene impregnated nylon. Riveted for extra strength! Lower straps are necessary to secure spur sets to the climber's leg. Ten holes for perfect adjustment and nickel plated hardware.
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Feed your throw line into this bag hand-over-hand. When weight is thrown, line will unfurl tangle-free. Includes carrying strap and "O"ring for clipping to belt or saddle. Use for deployment from ground or for repositioning while suspended in trees.
Specs
For use and deployment from ground or for repositioning while suspended in tree: Specs
Weaver medium throw line deployment and storage bag, blue: Specs
The (patent pending) grip strip provides added traction while walking on tree limbs, and doubles as a wear strip to inform you when it is time to replace your "J" Hooks. Unlike one piece climbers, the CTB Climbers utilize an aluminum lower "J" portion...
Product Features
: Product Features
Tempered for hardness and strength: Product Features
Clear coat anodized for added wear resistance: Product Features
Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs.
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Bright high visibility colors enable easy identification. So you need options! Lower-throwing weights provide the highest entry, especially with the Zing-It line and a Big Shot, but dense...
Combine with the Buck Port-A-Wrap III for the ultimate lowering system. Safe working load of 2,250 lb. Complete with 50' of 1/2" braided BLUESTREAK rope. Prevents blocks from twisting.
Double latch locking system stops hook from opening. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to reduce wear.
Highly visible 16-strand, great performance with friction hitches. Smoothest cover runs well through cammed devices; tightest cover in the industry. Extremely tight braid and smooth cover works well with cammed devices.
Single braid construction eliminates the core; nubby 12-strand construction for hand climbers. Polyester material maximizes tensile strength, while offering an enhanced ability to absorb shock.
Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped to one's feet, but will pull apart if the chain saw gets hung up in a falling limb.
Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
Measures 32 inches when relaxed: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
The combination of braided rope and twisted rope offers the best combination for this application. Different color thimbles to easily distinguish each end of the lanyard. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand...
Specs
Blue Streak 16-strand rope looped around a 3-strand twist nylon rope: Specs
Different color thimbles to easily distinguish each end of the lanyard: Specs
Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling. Aluminum sheave and bushing. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Stainless steel sideplates and axle.
Arbor-Plex works well when wet and is very durable. Lightweight, high strength 12-strand climbing line, and the most widely used rigging line in the arborist industry! It resists snags and has excellent knot-holding ability.
Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop. Rated to 310 lb, tensilestrength 5,000 lb.
Product Features
Specs
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
Tensile strength 5,000 lbs: Specs
1 and 3/4" webbing cross-arm strap features a D-ring which slips through a web loop: Product Features
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a...
Product Features
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
For ropes between 5/16" to 1/2": Specs
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes): Product Features
Designed for greater comfort in all situations! The X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for...
Yellow zinc chromate finish. Clamps tight onto cable providing an eye connection point for a come-along hook! Designed for use on 1/8" - 1/2" extra high strength and common grade guy strand.
