Major Axis Break Strength 26KN (5845lb). Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve.
Specs
Overall width 2.8": Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Product Features
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Length: Grillon with 9-foot rope lanyard
Braided nylon construction: Specs
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches. If every tree were the same, one weight would do the job.
Drop forged steel, 5,000 lb tensile strength. Double latch locking system stops hook from opening. Single "D" capacity. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to...
Specs
1 3/16 in. opening: Specs
5,000 lbs. tensile strength: Specs
1 in. eye: Specs
5 13/16 in. length: Specs
Double latch locking system stops hooks from opening by accident: Specs
Classic master saddle that features a step-in waist belt and two side-mounted friction buckles and individual leg straps with interlock buckles. Suspension system features a medium Dee-ring and six connection loops.
Kong designed their extra-large carabiners with a wide gate opening and a high tensile strength. When you are ready to disconnect, the unique sleeve design opens easily, even if you are wearing gloves!
Ten holes for perfect adjustment and nickel plated hardware. Lower straps feature split rings which makes securing the stirrup to your foot fast and easy. Yellow top grain Latigo steer hide leather! Lower straps are necessary to secure spur sets to the...
As well liked now as when it was first introduced, it is widely known and trusted as the "workhorse" for virtually all rigging uses. Arbor-Plex works well when wet and is very durable.
Not for fall arrest. Individual leg straps are 2" nylon and feature slip on pads for comfort. The front strap is reinforced with neoprene for extra durability. Models with sliding D-rings are designed for more freedom of movement.
Specs
Waist back is foam-filled and lined with soft, brown, oil-tanned, top-grain, steer-hide leather: Specs
Top grain leather. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability. Nickel plated rivets. 1/2"thick felt cushions the leg.
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. 20 essential knots cover most any rope tying situation: Bowline, Square Knot, Water Knot, Rolling Hitch, Sheet Bend (Doubled...
Extremely tight braid and smooth cover works well with cammed devices. XTC Fire is a tight braid 16-strand polyester over a high twist, torque balanced polyester core. Highly visible 16-strand, great performance with friction hitches.
Adjustable in height. Nickel plated snaps connect to saddles that are equipped with four small dees. Fits all Weaver saddles listed except 3114. 2" elastic suspenders attach to climbing saddles, distributing weight of attached gear.
Specs
Fits all Weaver saddles listed except 3114: Specs
Adjustable length: Specs
Metal clips ("D-rings") on the ends of the straps, four total: Specs
All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays firm and round in use.
Aluminum frame with chrome plated steel cams. This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". The Petzl Ascentree double handled ascender allows for a comfortable double rope climb!...
Product Features
Lower holes for connecting a lanyard: Product Features
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes): Product Features
Braided and twisted rope provides a secure system. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Carabiner shown on sliding prusik not included with 11CV or 12CV.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Holds its shape even with heavy use! Pro-Master 3-strand twisted rigging line. For price and performance there isn't a better three-strand rigging rope in the marketplace. Spun fiber on the surface offers excellent grip and knot holding.
Specs
Identified by a green surface tracer: Specs
Constructed of spun and filament polyester jacket fibers covering polyolefin core fibers: Specs
Angled style design. Velcro climbing pads have a double back cinch loop that provides a snug fit to the leg! Steel insert keeps the climber stationary and is compatible with Buckingham titanium/steel and Bashlin aluminum climbers.
Used correctly this can prevent the limb from coming in contact with a house or power line. Lbf., 2,000 WLL.. Friction is adjustable without having to wrap your rigging line around the base of the tree.
And weighs 2.3 lbs. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. It acts as a false crotch using rigging lines and a friction device to lower cut material.
An integrated safety latch prevents accidental deployment during handling. Do so by tightening the tension bolt until both halves securely join. This improved accuracy allows you to get your weight and line where it needs to go on the first shot.
Product Features
Specs
Integrated safety latch: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Diameter (inches): 1-1/4: Specs
Weight (pounds): 0.70: Specs
Improves launch accuracy and consistency: Product Benefits
Use with your Notch Big Shot Launcher: Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Product Features
Six foot long: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Ten holes for perfect adjustment and nickel plated hardware. Weather resistant neoprene impregnated nylon. Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg.
