Constructed with a tear away safety pack that activates when 200 lbs. Hi-Vis yellow with a 6 inch nylon loop and twist half hitch. Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped to one's feet, but will...
Specs
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
5' length available in contrasting colors to differentiate from climbing line. Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail.
Double layered leather palm, breathable stretch nylon back. Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your...
Product Features
Ergonomic cut for great dexterity without being too tight: Product Features
Carabiner hole to attach gloves to harness: Product Features
Durable double layer of leather in high-wear areas: fingertips, palm, between thumb and index finger: Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Neoprene cuff with Velcro closure: Product Features
Double latch locking system stops hook from opening. Single "D" capacity. Drop forged steel, 5,000 lb tensile strength. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to...
Specs
One-handed operation: Specs
5 13/16 in. length: Specs
Drop forged steel: Specs
5,000 lbs. tensile strength: Specs
Double latch locking system stops hooks from opening by accident: Specs
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
If every tree were the same, one weight would do the job. So you need options! Lower-throwing weights provide the highest entry, especially with the Zing-It line and a Big Shot, but dense canopies or rough bark can create enough drag to keep the small...
100% solution dyed, highly visible, orange polyester rope in a single braid 12-strand construction. Single braid eliminates the need for milking and stays firm and round in use. The braid is tight to prevent snagging, but supple enough for good handling.
The AVAO BOD harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall. Designed for greater comfort in all situations! The X-shaped dorsal construction wraps to reduce pressure...
Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line. Complete with 50' of 1/2" braided BLUESTREAK rope.
Offers extremely high strength, exceptionally low stretch, and excellent abrasion resistance to enhance durability! All in a small diameter, light-weight throwing line. 180 ft in length.
Specs
Ship wt: .5 lb
Description: 400 lb Strength, 1.75 mm line
180' in length: Specs
Zing-it line is available in 1.75 mm or 2.2 mm thickness: Specs
Lightweight and flexible; excellent knot-holding capability; great for footlocking. A full 1/2-inch, 24-strand rope! Samson Vortex climbing line is your safe and secure stronghold at the center of activity when you are ascending a tree.
Choose 12-inch long strap with a 2 1/2 in. Or choose the 48-inch long 2-in-1 snap. Ship wt 0.5 lbs. Ring or 12-inch long strap with a 4 in. Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Cover yarns treated to enhance abrasion resistance. SLH12 is rope and snaps only; no prusik. The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use.
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg. Ten holes for perfect adjustment and nickel plated hardware. Weather resistant neoprene impregnated nylon.
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
Note: Knots and bending used to secure the sling will reduce workload limit. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc.
Yellow zinc chromate finish. Maximum working load limit of 4,600 lbs. Clamps tight onto cable providing an eye connection point for a come-along hook! Designed for use on 1/8" - 1/2" extra high strength and common grade guy strand.
Specs
Maximum working load limit of 4,600 lbs.: Specs
Takes 1/8 to 1/2 inch cable, both EHS (Extra High Strength) and Common Grade: Specs
Convenient knurled knobs allow for easy rigging of the upper bushing. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Strength, durability and style! Features a patented design which gives them strength, durability, and style. Unlike one piece climbers, the CTB Climbers utilize an aluminum lower "J" portion that is precision milled to exact tolerances, then tailor-matched...
Product Features
2-5/8 in spike (overall length is 4-1/2 in, usable length is 2-5/8 in): Specs
Clear coat anodized for added wear resistance: Product Features
5,000 tensile strength. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. Adjustable from 3 to 6 feet.
A galvanized thimble is installed on one end with a safety locking snap with swivel on the other. This makes the flipline completely adjustable. The flipline is 10 feet in length but can be made adjustable by using a cam ascender (item XXRE) or a prusik...
