Blue color that won't fade or run, with high visibility in trees. All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays...
Safety load rated at 1,200 lb. A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing. Assorted colors.1" x 24
Average tensile/working load is 10,500 lbs/1,050 lbs for 1/2 inch; 18,000 lbs/1,800 lbs for 5/8 inch; 23,000 lbs/2,300 lbs for 3/4 inch. This absorption equates to higher load capacities than ropes of similar diameters.
Works very well with mechanical ascension devices. Has smoothest cover for mechanical ascension; low elongation with minimal bounce. The 24-strand Tite-Braid cover virtually eliminates cover milking and the polyester core creates a firm rope that stays...
Lengths available: 120 or 600 feet. Waterproof and weather resistant. NOT SUITABLE FOR CLIMBING. Diameters available: 1/2 inch, 5/8 inch, or 3/4 inch. Polypropylene rope with the look of manila, but 50% stronger! Resistant to chemicals, suited to areas...
This small profile makes it easy to transport — even for a climber! CMI designed the Rope Jack for one-handed operation by one person. You should relieve the tension off each cam a little bit at a time.
A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back...
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Both models are 26-inch. Climbing line diameter must be equal or greater than the Blue Streak (12mm). Snap version (HP26) features Buckingham's Steel Safety Snaps. HPE26 is eye-to-eye.
Specs
26" x 12 mm: Specs
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
This attachment also reduces arm fatigue caused by repetitive use. This improved accuracy allows you to get your weight and line where it needs to go on the first shot. Never pull the Big Shot pouch below the trigger position.
Product Features
Product Benefits
Integrated safety latch: Product Features
Quick, mid-pole attachment: Product Features
Customizable mounting location: Product Benefits
Use with your Notch Big Shot Launcher: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Aluminum sheave and bushing. Acts as a false crotch using rigging lines and friction device to lower cut material. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling.
Specs
Takes 3/4" rope.: Specs
Sideplate dimensions are 7" x 5".: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Two top-quality 22SL safety snaps and thimble for freedom of movement. Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. 5,000 lbs test.
This design provides a rope with good feel that works very well with mechanical ascension devices. Smoothest cover for mechanical ascension; low elongation with minimal bounce. The 24-strand Tite-Braid cover viturally eliminates cover milking and the...
6' length, single leg. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves...
Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
The convenient drawstring top closure provides quick and easy access. Helps keep rope coiled, tangle-free and protected! Made from 1,200-denier polyester, these bags feature spiral wire thats attached to the exterior of the bag to help prevent it from...
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
Metal insert for proper climber shank position. Moisture wicking Dri-lex liner. Compatible with Buckingham titanium/steel and Bashlin aluminum climbers. Buckingham combines their popular Big Buck and Cinch Velcro pad, to create the ultimate climber pad!...
Specs
Sold per set: Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (Bashlin is not a brand we sell, however, these pads will work with them if you have a pair): Specs
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
Adjustable from 3 to 6 feet. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. 5,000 tensile strength.
180 ft in length. Offers extremely high strength, exceptionally low stretch, and excellent abrasion resistance to enhance durability! All in a small diameter, light-weight throwing line.
Specs
Extremely high strength, low stretch, and excellent abrasion resistance in a small diameter, light-weight throwing line: Specs
Zing-it line is available in 1.75 mm or 2.2 mm thickness: Specs
Recomended for use with 8-10 oz throwing weights: Specs