Kong designed their bent gate carabiner to be small with a wide opening. Use it for many activities including climbing and sailing. They test each piece to ensure the utmost safety and manufacturing excellence.
Specs
Product Features
Open gate load (kN): 7: Specs
Eyelet diameter (mm): N/A: Specs
Heavy-duty aluminum construction: Product Features
5'8" length, 5,000 lb test. Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth.
Specs
Made of filament nylon woven into neoprene-impregnated cloth: Specs
Ten holes for perfect adjustment and nickel plated hardware! Upper straps are necessary to secure spur sets to the climber's leg. Latigo steer hide leather. 1" wide with roller buckles secured on top grain latigo steer hide wear pads that's riveted for...
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
The handle openings are large allowing easy use, even with gloved hands. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a wide bottom support surface and an excellent...
Product Features
Weighs 1 lb: Specs
Lower holes for connecting a lanyard: Product Features
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Helps you to be complient with OSHA 1910.268(g)(3)(i) ". Velcro on and off quickly! Protect your expensive spurs as well as your gear bag with these leather gaff guards. The gaffs of pole climbers shall be covered with safety caps when not being used...
Specs
Nickel plated rivets: Specs
Prevents injury and protects the gaffs; keeps them sharp: Product Benefits
High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary. Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the...
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
The long gaff is good for thick-bark trees: Product Features
This makes the flipline completely adjustable. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
Safe working load of 2,250 lb. Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line.
1" in width and feature roller buckles secured on top grain latigo steer hide wear pads. Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg.
Ship wt 0.5 lbs. Choose 12-inch long strap with a 2 1/2 in. All straps are double box-stitched for added strength. Bright orange color. The snap allows the user to keep the saw attached during use, even at arm's length.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Convenient knurled knobs allow for easy rigging of the upper bushing. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Its design allows you to attach it mid-line. Use with virtually any length of rope. This small profile makes it easy to transport — even for a climber! CMI designed the Rope Jack for one-handed operation by one person.
Special coating reduces abrasion and allows prolonged use of product without degradation. Offers extremely high strength, exceptionally low stretch, and excellent abrasion resistance to enhance durability! All in a small diameter, light-weight throwing...
Specs
Extremely high strength, low stretch, and excellent abrasion resistance in a small diameter, light-weight throwing line: Specs
Recomended for use with 8-10 oz throwing weights: Specs
The seat strap floats on the waist belt for easier positioning and is lined with soft brown leather. Our most popular saddle! Four fixed dee saddle: This saddle offers a seat strap with fixed D-rings for more stability.
Specs
Features dees at front and back for easy attachment of suspenders (sold separately) Product Number SUS122: Specs
4-Dee Extra Wide Back Saddle: Specs
Waist Size: 30-34 inches (20-inch Dee to Dee)
Not intended for fall arrest: Specs
The 1" high pull granite coated webbing leg straps help prevent slip-through: Specs
Buzzz Line makes a great choice for footlockers and arborists that prefer a full-sized 1/2-inch rope. Single braid construction eliminates the core; nubby 12-strand construction for hand climbers.
Fits all Weaver saddles listed except 3114. 2" elastic suspenders attach to climbing saddles, distributing weight of attached gear. Nickel plated snaps connect to saddles that are equipped with four small dees.
Kong also equipped this carabiner with a Keylock system. Kong manufactures each of their carabiners with the highest possible quality. The pear shape makes this carabiner suitable for belaying with a clove hitch.
Specs
Product Features
Main axis load (kN): 22: Specs
Minor axis load (kN): 8: Specs
Allows for belaying with a clove hitch: Product Features
The D-shape prevents the carabiner from rotating during use. When you are ready to disconnect, the sleeve opens easily, even if you are wearing gloves! They test each piece to ensure the utmost safety and manufacturing excellence.
Specs
Keylock system prevents snagging: Product Features
Blaze is an innovative, lightweight 11mm spliceable double-braided rope that boasts a smooth 24-strand braided cover. Has smoothest cover for mechanical ascension; low elongation with minimal bounce.
