High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary. Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the...
The long gaff is good for thick-bark trees: Product Features
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
An integrated safety latch prevents accidental deployment during handling. Do so by tightening the tension bolt until both halves securely join. This improved accuracy allows you to get your weight and line where it needs to go on the first shot.
Prevents blocks from twisting. Combine with the Buck Port-A-Wrap III for the ultimate lowering system. Safe working load of 2,250 lb. Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking...
Fits all Weaver saddles listed except 3114. Nickel plated snaps connect to saddles that are equipped with four small dees. Adjustable in height. 2" elastic suspenders attach to climbing saddles, distributing weight of attached gear.
Specs
Fits all Weaver saddles listed except 3114: Specs
Adjustable length: Specs
Metal clips ("D-rings") on the ends of the straps, four total: Specs
Convenient knurled knobs allow for easy rigging of the upper bushing. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
Ship Wt. .5 lb. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to...
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your climbing harness.
Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Goat skin leather and stretch nylon: Specs
Carabiner hole to attach gloves to harness: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Durable double layer of leather in high-wear areas: fingertips, palm, between thumb and index finger: Product Features
Used correctly this can prevent the limb from coming in contact with a house or power line. Lbf., 2,000 WLL.. Friction is adjustable without having to wrap your rigging line around the base of the tree.
Note: Knots and bending used to secure the sling will reduce workload limit. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc.
The gaffs of pole climbers shall be covered with safety caps when not being used for their intended use." Sold in pairs. Fits virtually all gaffs. Helps you to be complient with OSHA 1910.268(g)(3)(i) ".
Specs
Hook-and-loop (Velcro) straps hold it to the stirrup: Product Features
Assorted colors.1" x 24 A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing. Safety load rated at 1,200 lb.
No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length...
Includes the Buckadjuster one-way cam: Product Features
Snap version (HP26) features Buckingham's Steel Safety Snaps. HPE26 is eye-to-eye. Both models are 26-inch. Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch...
40,000 lb tensile, 4,000 lb working load. Stainless steel sideplates and axle. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Acts as a false crotch using rigging lines and friction device to lower cut material.
Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays firm and round in use.
Product Features
Specs
Rot and mildew resistant: Specs
Low stretch, high strength, non-rotational, maintains excellent flexibility: Product Features
Overall length is 26". Ten holes for perfect adjustment and nickel plated hardware. Durable, weather resistant neoprene impregnated nylon. Lower straps feature split rings which makes securing the stirrup to your foot fast and easy.
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
Throw bag made of 14oz cordura nylon: Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
Ship wt 0.5 lbs. The snap allows the user to keep the saw attached during use, even at arm's length. Ring or 12-inch long strap with a 4 in. Or choose the 48-inch long 2-in-1 snap.
Type: 16-inch overall length lanyard with snap
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Includes carrying strap and "O"ring for clipping to belt or saddle. Use for deployment from ground or for repositioning while suspended in trees. When weight is thrown, line will unfurl tangle-free.
Specs
9 in. high x 7 in. wide: Specs
For use and deployment from ground or for repositioning while suspended in tree: Specs
The AVAO BOD harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall. Designed for greater comfort in all situations! The X-shaped dorsal construction wraps to reduce pressure...
The minimum breaking strength is 3,800 lbs. Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
