The minimum breaking strength is 3,800 lbs. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. Aluminum pulley for arborist use! Uses a 1/2 inch rope.
Maximum working load limit of 4,600 lbs. Yellow zinc chromate finish. Clamps tight onto cable providing an eye connection point for a come-along hook! Designed for use on 1/8" - 1/2" extra high strength and common grade guy strand.
Achieve higher throws with lighter weights, greater control due to low stretch, and ability to pull down "hangers" due to its high strength. Special coating reduces abrasion and allows prolonged use of product without degradation.
Specs
Ship wt: .5 lb
Zing-it line is available in 1.75 mm or 2.2 mm thickness: Specs
Blue color that won't fade or run, with high visibility in trees. All polyester climbing rope with high strength, low stretch, excellent abrasion resistance and a long service life! The single braid construction eliminates the need for milking and stays...
Specs
Non-rotational: Specs
Fiber: 100% polyester: Specs
Weight: 12 lbs.
12-strand single braid: Specs
True-Blue offers the highest level of performance in a high strength , low stretch climbing line with maximum wear resistance: Specs
7300 lbs tensile strength, 10 to 1 working load: Specs
Red core alerts you of excess wear. Fully adjustable from 2"to 10'. Unique rope grab with 90 twist eliminates need for swivel or twisted clevis. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach...
Product Features
Fully adjustable from 2" to 10': Specs
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Red core alerts you of excess wear: Product Features
The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use. SLH12 is rope and snaps only; no prusik. Cover yarns treated to enhance abrasion resistance.
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Its design allows you to attach it mid-line. CMI approves the Rope Jack for use with static ropes from 3/8 to 5/8-inch in diameter. Pull the handle again and allow the forward cam to loosen.
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Major Axis Break Strength 26KN (5845lb). Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve.
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
Weather resistant neoprene impregnated nylon. 1" in width and feature roller buckles secured on top grain latigo steer hide wear pads. Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg.
Drop forged steel, 5,000 lb tensile strength. Single "D" capacity. Double latch locking system stops hook from opening. New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to...
Specs
5 13/16 in. length: Specs
Double latch locking system stops hooks from opening by accident: Specs
Choose the system you need below: The Mini System: is for fruit trees; training young trees for dominant leaders and proper form; and guying small trees. This system can be crafted on site.
This saddle offers the climber a sliding dee saddle with a seat/leg strap combination. A similar fit and feel to the Climber's Best saddle, but with more movement allowance utilizing a sliding dee ring in place of the fixed D-rings.
Pictured with Galvanized Thimble sold separately. Use with extra high strength or common cable, left hand lay only. For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original...
As well liked now as when it was first introduced, it is widely known and trusted as the "workhorse" for virtually all rigging uses. It is identified by a green ink stripe. Arbor-Plex works well when wet and is very durable.
High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary. Complete with nylon leg straps and foot straps for added durability. Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates...
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
The long gaff is good for thick-bark trees: Product Features
Interlocking leg buckles and tongue buckle waist. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. For enhanced torso movement.
They test each piece to ensure the utmost safety and manufacturing excellence. This shape also distributes the load along the major axis of the part. The D-shape prevents the carabiner from rotating during use.
Aluminum O-right attachment point and rope bridge allow for added lateral movement. Wide webbing across back reinforces the light back pad for increased back support. The Glide Lite saddle emphasizes safety and versatility, all in a light weight 3.6 lb...
1" neoprene leg straps keep the seat strap in place during use. Not for fall arrest. This saddle is similar to our Climber's Best Saddle in a cotton version. Sizing note: Allow adjustment for seasonal clothing.
Specs
Weight 5.2 pounds: Specs
1-inch neoprene leg straps: Specs
Two nylon utility straps; one with a 2-inch nickel-plated ring, the other with a 2-inch nickel plated snap: Specs
Safe working load of 2,250 lb. Prevents blocks from twisting. Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line.
