Applicators Accessories Livestock Supplies For Sale In San Francisco

For use with Z Tag No Snag tags.

When properly applied to Y-Tex tags, Y-Tex tag ink is guaranteed legible for four years. The Y-Tex ear tag marker with black ink includes interchangeable broad and fine tips.

Extra black blunt pin for use in the Allflex Universal Total Tagger Plus.

The VetGun comes with a CO2 adaptor that fits a specific CO2 cartridge size: either the 25 gm OR the 90 gm. An additional adaptor of the alternate size allows you to modify your VetGun for use with the alternate size CO2 cartridge.

A significant change in current ampere readings between one point and the next indicates the presence of a fault between these two points. Hand-held unit allows you to quickly move down your fence line, comparing voltage and current readings as you go,...

Test voltage under "load" on your fence. Reads from 1,000-10,000 volts; lights glow in sequence to indicate approximate voltage. For use with all fence energizers. Enables you to test the "control factor" of your system and assist you in fault finding,...

12-tooth spool for fine adjustment, robust, high-quality, spring-loaded locking clip. Integrated joint clamp allows direct attachment of wires for paralleling and power connection.

Extra Pin for the Z-Tag Applicator.

Rated for high-tensile wire. Heavy-duty steel construction. Has a tough insulating grip and strong spring.

Acceptable for all types of electric fence material. 2 alligator clamps joined by 32” of shielded wire. Connects and transfers power from 1 strand to another.

Connects to an end tensioner to open gate.

For use with low impedance fence chargers. Easy-to-read digital design, reads up to 19.9 kilovolts. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately.

One-inch shaft turns on greased bushing for smooth operation and long life. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control. Has adjustable drag to prevent free wheeling of coil.

Comes packed 12 flags and 12 K-Clips per bag. These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night. The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility.

Fimco sprayer includes corrosion resistant 55 gallon polyethylene tank with molded-in sight gauge markings, 12-volt 2.1 GPM diaphragm pump with 60 PSI maximum, 5" fill opening, single manual lever valve boom control (on-off), relief valve, 7 nozzle fold-behind...

Fits atop the hole on your inner cover to allow bees access to the syrup via tiny holes drilled in the lid. Little Giant Bucket Feeder features an easy-to-use design that helps protect syrup from robbers to keep your bees fed when outside nectar sources...

Grinding bit used with Dremel tool to engrave Ritchey tags.

Pin used in Allflex Retractomatic tagger to apply Global Allflex tags.

Preset at the appropriate temperature for removal of caps, the heated knife heats up quickly and is ready to use within a minute. Little Giant Electric Uncapping Knife easily heats up and quickly removes the wax from frames of capped honey.

Blue pin is required when using the Allflex Universal Total Tagger to apply Allflex Piglet Tags.

Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension. Helps absorb expansion and contraction of the fence wire. Fence compression spring is used to determine wire tension on your fence line.

A bracket is needed to secure each rail to line and corner post. The belt-loop design allows the rail to slip through for easy tensioning and rail flexibility. If the rail is hit, this design allows the entire fence line to absorb the impact, thus reducing...

Used with Dremel tool. Shaft tool allows for more flexibility when engraving Ritchey tags.

Tagger used to apply Dewlap tags.

Total) of straight fence line. It can tension around corners and up to 660 ft. In each direction (1320 ft. The two way barrel tensioner is a CenFlex rail accessory. For every major directional change.

Gate swings closed automatically. Flexible fiberglass polyethylene arms support electrical streamers (30" in length and 6" apart) and bend in any direction. Metal never touches the tractor or vehicle, as it is covered by the fiberglass/polyethylene.