Accessories Livestock Supplies For Sale In United States

Ideal for use in temporary electric fencing with round posts from 1/4" to 5/8" diameter. Convenient to use when more than one wire is required to hold stock.

Stainless steel clips for use with 3/8" or 1/2" fiberglass posts. Pig tail clips may be used instead of insulators.

One-inch shaft turns on greased bushing for smooth operation and long life. Has adjustable drag to prevent free wheeling of coil. New improved design has numerous adjustments to keep Hi-Tensile wire coil under control.

24' spring gate is excellent for electrically bridging wide gate openings. Contracts to 32” when open and includes the unique Safe-Fence tensioners with special gate hood plates to attach the spring and handle to any type of electric fence system.

Connects to an end tensioner to open gate.

Holds cattle, hogs, sheep and horses like an electric fence. Easy to install. Flexible fiberglass polyethylene arms support electrical streamers (30" in length and 6" apart) and bend in any direction.

Has a crank handle that operates like a ratchet for fence tension; will handle up to 1/2 mile of Bayguard. Designed so it can be hung from a permanent fence wire or bolted to a post.

Complete ground rod kit to get the most from your electric fence system. Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions.

Premium gate handle with comfortable rubber grip and unique internal overstretch protection. The half spring, springload internal mechanism will not allow you to over stretch.

Connects power from a 12-volt DC battery to 12-volt energizers equipped with input jack.

Just replace your fuse and you're good to go. Lightning blows up the fuse and not your fencer. The only external fuse protection for fence chargers in the world.

A quick, convenient way to splice Hot Rope for a better, stronger splice. Appropriate for use with 1/8" and 1/4" electric rope.

1 1/2" Tape Clip, designed specifically for equine electric fence tape to be securely attached to a Gallagher Insulated Line Post.

One inch of compression equals 150 lbs of tension. Fence compression spring is used to determine wire tension on your fence line. Helps absorb expansion and contraction of the fence wire.

For use with low impedance fence chargers. Matches the performance meter on Parmak fence chargers but will also read all fence chargers accurately. Easy-to-read digital design, reads up to 19.9 kilovolts.

Converts 110-volt AC power to 12-volt DC power for AC/DC and DC convertible energizers.

Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods. Cords are 46" long and clamps are 3".

Activated when fence pulse is detected Switch to change between DVM and Current Meter modes Retractable voltage probe for reading voltage on energizers and other hard to reach areas Micro-chip technology that enables low voltage operation Detachable ground...

Convenient extra long 68" ground cord. The lights are calibrated to illuminate from 625 to 7000 volts. A simple 8-light power indicator for standard or low impedance fencers.

Comes with 2 large screws and spring pin. Easily used by anyone, simply turn the crank to desired tension. Close your barbed wire gates with an easy crank handle. Mounts with 2 large screws.

Vinyl sleeves slip over T-posts for safety and appearance. Complete with cap.

May be used to terminate the rope at the end of the fence. Features 2 double-post rope clamps and joined by 32” of 12 gauge, shielded wire. Connect and transfer power from 1 strand of 1/4” electric rope or braid to another.

Replacement stainless steel K-clips for the Fence Flag (#24135) operation.

Provides an instant warning of low or intermittent voltages to detect fencing problems during hours of darkness. Starts working when your fence stops. Attach to fences near roadways, driveways, buildings, etc., anywhere fence is passed or seen during...

May also be used to terminate the rope at the end of the strand. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. Connect a fence energizer to 1/4” electric rope or braid.

Vinyl sleeve fits 4" x 4" x 5' posts including gates and corners. Complete with caps.

Fits the 13-19' and 18-24' gate.