Helps absorb expansion and contraction of the fence wire. Spring is 1 1/2” diameter, expands from 9” to 18”. One inch of compression equals 150 lbs of tension. Made from 1/4” spring steel.
Contains 3 six foot galvanized rods, 3 heavy duty clamps, 48' connection wire and complete instructions. Complete ground rod kit to get the most from your electric fence system.
2 alligator clamps joined by 32” of shielded wire. Connects and transfers power from 1 strand to another. Acceptable for all types of electric fence material.
Cords are 46" long and clamps are 3". Made with heavy-duty alligator clamps and double-shielded, high-voltage wire for leak-proof transfer of power from the energizer to the fence and ground rods.
These bright white 3" x 5" plastic markers give you a safer, more visible fence, even at night. The stainless steel K-Clips instantly attaches to existing wire fences for geater visibility.
It is simple to use - place in bottom of incubator and plug in. Farm Innovators Automatic Egg Turner automatically turns the eggs completely every 4 hours to eliminate manual handling and improve hatch rate.
Has an in-line length adjustor for gates from 8 ft. Electri-Gate is a high conductive stretchable cord with a high impact plastic handle. Comes complete with two 2-way gate anchors.
A bracket is needed to secure each rail to line and corner post. The CenFlex bracket is a CenFlex rail accessory. The belt-loop design allows the rail to slip through for easy tensioning and rail flexibility.
✓ Made with a steel core for added strength and durability
✓ 20-Year limited warranty
✓ Made in U.S.A
✓ Easy attachment to post with 3-1/2 in. nails or 2-1/2 in. deck screws (nails and screws not included)
The applicator handle is molded into a pistol grip style design, which is both comfortable to use and requires minimum physical effort from the operator during tag application. The Y-Tex Feedlot Tag Applicator is manufactured using an engineered plastic...
The termination bracket is a CenFlex rail accessory. This bracket functions to terminate or anchor the end of a rail on an end or gate post. Simple design requires no wire stripping or special tools, making termination quick and easy.
For every major directional change. It can tension around corners and up to 660 ft. The one way barrel tensioner is a CenFlex rail accessory. This piece functions to tension and terminate the rail at gate or end post.
✓ Available in white, black and brown to match CenFlex rails
✓ Block and sprocket design for quick and easy tensioning
✓ Zinc-rich epoxy primed and powder coated for smooth, long lasting, corrosion-resistant finish
For every major directional change. It can tension around corners and up to 660 ft. The one way barrel tensioner is a CenFlex rail accessory. This piece functions to tension and terminate the rail at gate or end post.
✓ Zinc-rich epoxy primed and powder coated for smooth, long lasting, corrosion-resistant finish
✓ Don't forget the required accessories:
✓ No specialty tools needed for tensioning (tensions with standard 1/2 in. drive)
Prevue Pet Products Egg Basket is ideal for collecting and transporting your fresh eggs. Open design allows dirt and debris to fall out while collecting eggs, aids in quick cooling, easy washing and fast drying.
Helps protect your 110-volt plug in energizer from power surges caused by lightning strikes. Plugs into any 110 volt outlet, limits high voltage spikes to 350 volts. Absorbs up to 34 watts of transient power.
The only external fuse protection for fence chargers in the world. Lightning blows up the fuse and not your fencer. Just replace your fuse and you're good to go.
Total) of straight fence line. This part functions to tighten and splice two long sections of rail. In each direction (1320 ft. The two way barrel tensioner is a CenFlex rail accessory.
✓ Constructed of heavy-duty steel for strength
✓ Zinc-rich epoxy primed and powder coated for smooth, long lasting, corrosion-resistant finish
Connect a fence energizer to 1/4” electric rope or braid. Features a double-post rope clamp connected to a 3/8” terminal with 32” of 12 gauge, shielded wire. May also be used to terminate the rope at the end of the strand.
Little Giant 2nd Edition Beekeeping for Dummies by Howland Blackiston is a comprehensive training guide for all things beekeeping. The book will walk you through the tools of beekeeping, the steps necessary to build and maintain your own beehives, and...
Elastic closures at both the sleeves and ankles will keep out bees. Little Giant Beekeeping Tyvek Coverall with a full-front zipper closure will keep you protected while caring for your bees.
Recommended for high tensile wire use (usually 12.5 gauge wire). In-Line strainer constructed with a galvanized steel frame and aluminum alloy spool and features a spring loaded clip to keep from unwinding.
The termination bracket is a CenFlex rail accessory. This bracket functions to terminate or anchor the end of a rail on an end or gate post. Simple design requires no wire stripping or special tools, making termination quick and easy.
✓ Includes installation hardware for convenience
✓ Zinc-rich epoxy primed and powder coated for smooth, long lasting, corrosion-resistant finish