Accessories Generator Accessories For Sale In Ottawa

Feel confident that your generator will perform in subfreezing weather with the KOHLER Cold Weather Kit. Recommended for generators installed where the temperature regularly falls below 0C (32F).

The Storm bracer Extreme extends the high quality Standard Edition by adding UV treatment, extreme cold weather rating. Choose between our Standard and Extreme editions. GenTent has been tested up to 70 MPH forecast winds, snow load up to 18 in.

The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.

The 10-Gauge, 30 Amp cord is fully insulated and ready to take on extensive outdoor use plus, the split outlet configuration allows for easy connection to multiple devices. Power up your Firman Generator with this 25 ft.

(193 cm) and 112 in. Our XKU kit model is for inverter or fully encased generators with case perimeter between 76 in. Installation is easy - Simply Strap it, Frame it and Cover it in three easy steps to Weatherproof your Power.

The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8 l engines.

Easily connect 2 Energizer eZV P-series inverter generators with this kit. No fussing with ground wires or multiple ports, this kit connects safely to each generator with a single port.

The fascia base wrap snaps together around the bottom of the new air-cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base.

Intended for use with 7000-Watt generators less than 28.75 in. The Generator Cover is constructed of 600D polyester with a PVC coating and fitted with an elastic cord drawstring around the bottom to keep your generator dry and protected.

Clean your car, your pet or yourself. Whether you're camping, fishing or pet cleaning, the Pyle Pure Clean Pressure Washer System is just a spray away. Drop it into water and you're ready to clean.

LIFANs unmatched investment in research and development ensures quality generators, water pumps, pressure washers and engines at extraordinary value. LIFAN Power USA is proud to offer the full line of LIFAN Power Equipment.

The system can consist of up to 8 individual Smart Management Modules (SMM). Generac's Smart Power Management System is designed to optimize the performance of a standby generator.

(193 cm) and 112 in. Our XKU kit model is for inverter or fully encased generators with case perimeter between 76 in. Installation is easy - Simply Strap it, Frame it and Cover it in three easy steps to Weatherproof your Power.

The Air Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators. Oil will need to be purchased separately based upon manufacturer recommendations listed below.

This is a Locking Adapter for Generator/RV/EV/Range use. It is NEMA L14-30P 30 Amp 125/250-Volt 4-prong locking plug to NEMA 14-50R 50 Amp Straight Blade RV/EV/Range Connector. This is a Super Durable Over Molded Adapter.

Oil will need to be purchased separately based upon manufacturer recommendations listed below. The Generac Scheduled Maintenance Kit for Generac Air-Cooled Generators is designed for use with Generac air-cooled generators.

Intended for use with 15,000-Watt generators less than 37 in. The Generator Cover is constructed of 600D polyester with a PVC coating and fitted with an elastic cord drawstring around the bottom to keep your generator dry and protected.

Thanks to the re-launch of Generacs HomeLink Upgradeable Manual Transfer Switches, protecting your desired loads and transitioning from portable power to an automatic standby solution is easier than ever before.

Refer to the generator owner's manual for more information. Maintenance intervals may differ per model. Scheduled maintenance is a necessity for all standby generators. Maintenance for the fuel and oil filters is recommended at every 250 hours or 2 years...

The Cold Weather Kits consist of a battery warmer that has a thermostat built into the battery wrap. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator...

Parallel Cords allow the user to obtain the full power of both units, limited only by the capacity of an individual outlet. Linking two identical units together will give you extra power when you need it, without having to trade up for a larger, heavier...

Tank risers are required in some municipalities. This accessory helps avoid potential base tank corrosion caused by mounting on rough surfaces. The powder painted steel risers attach to the bottom of the base tank, through provided mounting holes, to...

Each warmer also automatically turn off when temperatures climb above 40°F. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents.

With the 60-Volt/10-Amp output, the maximum current can be limited to 5-Amp using the auxiliary output on the front panel (10-Amp main output is available on the back panel). The highly efficient DCP60 incorporates upgraded SMPS circuitry with small form...

This Carburetor Heater is designed for KOHLER Generator models 12RESL, 14RESAL and 14RESAL. There are KOHLER Home Generators designed for homes large or small and whether you want whole house or partial backup power.

Its durable exterior is made of a high-grade UV and water-resistant vinyl to fight rain, sleet, hail, snow and even sun while the inside contains a cotton lining to prevent scratches and scuffs on the body of your unit.

This is Household/Generator/Industrial/RV/Marine Locking Adapter. It is NEMA 5-20P 20 Amp 125-Volt Straight Blade Plug to L5-30R 3-Prong 30 Amp Locking Female Connector. This is a Super Durable Over Molded Adapter.